Ipod nano 6 does not recognise charger when connecting to ipod
When I try and connect charging lead to my IPod 6, (that was a replacement for Ipod 2) the screen alternates between Apple logo and icon screen, then it a message appears that the battery is low and to connect to a charger. I have tried Apple support sites on internet but nowhere does it address my problem. Can anybody please help?
I reset the ipod by holding down the power button and the menu button and the apple screen came up after a few moments - this seems to have done the trick!
Similar Messages
-
Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
-
Ipod Nano 7th Gen only charges when connected
So my friend had her Ipod Nano 7th generation laying around. She bought it from someone else. They both could not figure out how to use it so they kept selling it off cheap. I ended up getting it for a good price only to come home, plug it into my computer, and all it does is charge it. My computer doesn't even recognize a device is plugged into it. I've downloaded, reinstalled, and made sure Itunes was updated but that's not the problem. The computer alone doesn't even seem to know its there.
The last time I had an ipod like this, I remember just having to right click on it in my devices and then go to Itunes and it was there. But with it being connected to my computer right now, full battery... It is like its invisible.
What I have all tried is below
Making sure Itunes is updated
Restarted Computer
Connected and reconnected Ipod Nano
Held Center Button and Power button to reset it
Did the same thing to try and put it into disk mode
Reconnected the ipod to every possible USB port on my computer (3 different spots)
I feel like there was something missing when she dropped this off. When she delivered it, it came with the sync/charge cable, the ipod, and the arm band. Please help.I believe you may have discovered why multiple people "kept selling it off cheap".
Unfortunately, it seems like the "good price" you got it for was a bit too high... Drop it in the recycle bin at your local electronics store the next time you're there. -
My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help
If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.
-
MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?
You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.
-
Ipod nano 6th not recognised by win 8
iPod nano 6th not recognises by PC running win 8?
Found this in another thread and it worked for me...
Try this:
Windows 8.1, 64bit
It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
I tried many things, I may have missed a step below. But the following is what I believe was the fix - since it worked on a 2nd PC.
Make sure you are using an administrator account. Any of them on your machine will do for the following
a) Get Windows to restart the drivers:
- disconnect your USB device and close ITunes
- connect your USB device
- if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device. -
My new iPod nano does not get the battery life that is advertised
Help me my iPod nano does not get the battery life that is advertised
Which battery life are you referring to? Apple's website states the iPod Nano 6th Gen will get "up to 24 hours of music playback when fully charged". There are going to be a lot of things that can change that. Are you using the stopwatch or the count down timer a lot? Are you using the FM radio a lot? Any accessories that you are using with the iPod? These will all have an effect on your battery life.
-
My iPod nano does not appear in iTunes,
My iPod nano does not appear in iTunes. I have installed the updated version of itunes but nano was not connected. Do I need to connect while updated?
Hi pbirdy,
Thanks for using Apple Support Communities.
If your iPod does not appear in iTunes when you connect it to your PC.
For more information on this, take a look at this article:
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Best of luck,
Mario -
Ipod nano does not synch all contacts
ipod nano does not synch all contacts. When it synchs, it only transfers 7 of 2000+ contacts
My point in the original posting that this is a bug seems to have been answered affirmatively by the notations of the quirkiness of the action. The argument that it must not be a bug because it would have been solved by now is totally disingenuous. Apparently Apple programmers (or their management) are not any superior to Microsoft programmers in that they focus on adding new bells and whistles while allowing longstanding problems in the core code to continue to fester.
-
Why would my iPod nano suddenly not recognise its USB device? What the???? Cannot sychronise or transfer my music from my PC, had a back up USB & does not recognise this either. Please can s'one advise?
Thank youHave you tried restarting your computer?
-
Voice over in ipod nano does not recognize different languages
hey, apple support? would you be so kind as to answer this question?
This is really a problem! Voice over in ipod nano does not recognize different languages and speaks only one language!! even though the song tags are in russian spanish japanese etc
When you plan to fix it??????Hey ecmda,
Thanks for using Apple Support Communities.
If it is playing one song over and over it may be on repeat.
iPod nano
User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
Repeat songs
Tap the Now Playing screen, then tap . Tap again for more options:
= Repeat all songs in the current album or list.
= Repeat only the current song over and over.
Have a nice day,
Mario -
My new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found
my new ipod nano does not sync the ipod name cannot be synced the required disk cannot be found
Wow .... so you are syncing via WiFi when you sync .... would that be correct?
I would still quit iTunes and then restart and see what happens. The iPad and iTunes must be playing some weird games.
If you do sync via WiFi (I do), I think you are better off closing iTunes when you are done - unless of course you are using iTunes for Home Sharing or something like that. My experience is that if you leave iTunes running, the iPad and iTunes just start sending weird signals back and forth.
Since I started Wifi syncing, I have seen messages in iTunes that made absolutely no sense at all. Anyway, that's my take on it. If you do not WiFi sync, then I have no clue why you are getting these messages. -
ITunes does not start anymore when connecting iphone
Hello,
since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
Does anybody has an idea to solve this issue?
Thx,
HendrikHi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers, -
Itunes does not start automaticly when connected although auto is thicked help?
Itunes does not start automaticly when connected although autostart is thicked can anyone help?
Hi,
See this Discussion:
https://discussions.apple.com/message/15693777#15693777
Cheers, -
My daughters ipod nano does not show up in her itunes
My daughters ipod nano does not show up in her itunes on her computer. It has error message ipod has been detected but could not be identified properly. we have uninstalled itunes and reinstalled with the same error message. Her itunes is 10.2 .1.1 version. If you plug her ipod into my computer/itunes it works just fine. I am also using version 10.2.1.1
We have tried updating to 10.5.2 itunes but it runs for ever and then says it can't update.
help please?iPod appears in Windows but not in iTunes
Maybe you are looking for
-
I have been working on a video for awhile now and I've recently noticed that my .flv export format has been removed from my choice of encoders. I export from Poser Pro Game Dev to Png Image Sequence. I organise a cam angle in After Effects...I re ren
-
Naviage to another iView in Visual Composer
I am trying to configure navigation from one iView to another. I have going through many tutorials but to no avail. The result of the steps below should be that the source iView is shown. When the submit button is clicked the value in the source_fi
-
Post Author: vpost CA Forum: Data Connectivity and SQL I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data ba
-
I manually installed the agent on a member server in a domain (domainB) that has an external trust with the domain the DPM 2010 server, mydpmserver.domainA.int, is in. I pointed the agent on myprotectedserver with setdpmserver -dpmservername mydpmse
-
Course detecting SCORM 2004 but sending 1.2 commands
I've been testing Captivate 2.0 courses within SABA 5.2.0.2. Everything works correctly but when the course is successfully completed, it won't move to transcript. I contacted SABA and provided them with the course to test in their lab. Here is was t