Ipod nano 6G error 9006

After several months I found my Ipod Nano again. In the meanwhile, I switched from Android to Iphone 5s and got quite common with ITunes.
ITunes does find the Ipod, but states, that he is in "maintenance mode" and needs to be restored by ITunes - done so, updated ITunes to newest version, IPhone works well, but when downloading newest IPod Nano software, at the end of the 4-5 minutes download I receive error message "unkown error 9006".
I've presed power button together with vol - also for x-times, but unsucessful.
Is there any hint I haven't been able to find via google??
Please advise

That one can indicate a security software issue. In the course of your troubleshooting to date, have you worked through the following document?
Resolve issues between iTunes and security software

Similar Messages

First Generation Ipod Nano gives error message when using Windows Vista

I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
Conclusion: Early Nanos work with XP, but do not function properly with Vista.
Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.

All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Ipod nano 6gen error message 13019 I have tried soooo much!!!

I have re-installed itunes and reconfigured my ipod back to factory settings but my ipod nano 6gen keeps getting the (error message 13019) please help me sync my ipod!!!!

See this article.
http://support.apple.com/kb/TS2830
Some have been able to resolve it by removing podcasts and/or rebuilding their iTunes library.
http://support.apple.com/kb/HT1451
B-rock

Ipod nano 4GB (error message in itunes)

I receive an error message when itunes is up and my ipod nano is connected. The error message says: The file or directory\iPod-Control\iTunes\iTunesDB is Corrupt and Unreadable. Please run the Chkdsk Utility. Also, no music can be transferred to my ipod. At times a window pops-up saying: iTunesLibrary.itl cannot be read because it was created by a newer version of iTunes. I did download the latest version and still dosn't work!
Can anyone help on the steps to solve this problem?
Thanks!

The only advice I can give it restore everything to it origninal setting and from your Itune snyc everything back in

Ipod nano 6g, error code 1601

hello
I have a problem with iPod nano 6g. When connected to the iMac is not visible. I push all the buttons and wait. It starts to connect and after a while the message: iPod is visible but unrecognized. error 1601??
I would add that for some time does not turn on. Yesterday I connected it to yamaha hifi and work. today again is black.
Please help Maja

Hey MajaPil,
Thanks for using Apple Support Communities.
Looks like you are getting an error when connecting to the iMac.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1600
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Have a nice day,
Mario

Ipod nano sync error 13019 - I've tried everything suggested.Now I Have a blank Nano. Any suggestions?

Now I have a blank nano.

Hello RonTheStockGuy,
I agree with Ingo2711. Here are the steps to fix the issue:
The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.
p.s.s. To add your playlists back to iTunes:
-Click file at the top of the screen
--move your mouse over library, selecte import playlist
--on the new screen that pops up, navigate to your desktop
--open the playlist folder, select the first playlist, hit ok
--repeat for each playlist exported

Ipod nano, sync error 13019?

Hey! I have an ipod nano and cannot sync it to my itunes. The error '13019' keeps appearing. Any thoughts or suggestions?

Ive fixed this issue before. The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.

Ipod Nano sync error : Hard disk write protected

I have a 2nd gen IPod nano 4 GB. I had Itunes 7.1 installed on my PC when I last synced. A week later my disk crashed and in the new disk I installed Itunes 7.2. When I tried to sync, I get a error message which says " disk is write protected. Please remove write protect and sync again "
Can someone help

No, you can use a third party program like Yamipod, or XPlay2, etc. But I would advise you to download iTunes anyhow, even if you have to go to another computer and then burn it to a CD or something.
12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+ Mac OS X (10.4.4) 3G iPod, iPod shuffle, iPod nano

Ipod nano, firewire error msg and refusal to stop

Recently I had an error message on my nano stating that the iPod does not support FireWire. This message occured while I was using the iPOD while running and there for it was not connected to any computer. I use a windowsXP machine, and thus no firewire at anytime. I restored the nano and it worked. The next day I received the same error message. Also the nano would not turn off. The batteries ran down, and the next day I again restored the nano. At this point the nano will play but it will not turn off. The pause function will work (the button is active), but continous pressing of the pause/play button will not turn off the nano.
Suggestions?

Okay, I had this exact problem today. The firewire error message came up while I was playing a podcast. I couldn't make the message go away by clicking the center button. I plugged it in to my computer (USB) and then once I unplugged it, it would not turn off. After some troublshooting with Applecare on the phone, once I uninstalled iPod for Windows, iTunes, QuickTime (in that order, don't restart between iTunes and Quicktime. Once Quicktime is uninstalled, then restart.) and then reinstalled the newest version, iTunes+QuickTime and THEN restored the iPod I no longer had the error message and my iPod does turn off. This is, of course, good news for me because I am about to go on a trip and NEED my iPod! Also keep in mind that once you disconnect the iPod from your computer, it won't turn off right away. It needs to sit for about 10 seconds before it will allow you to turn it off.
Good luck!
Windows XP
Windows XP iPod Nano 1gb black

IPOD Nano Service Error!!

My Ipod Nano isnt working, and trying to update it is only resulting in it telling me 'Service Error'..anyone know what i should do?
Thanks!!

See if any of these articles help, they all reference the iPod Service Error:
iPod Service Error (1)
iPod Service Error (2)
iPod Service Error (3)

New ipod nano and error in updating itunes and quicktime (error 1905)

this is really annoying me, i have itunes 6.0 or 6.1 or something, and i recently purchased an ipod nano.it said the new nano was only compatable with itunes 7.1, so i went to apple.com and downloaded it. it took two hours to download the set-up for itunes 7.1. i ran the set-up, and then in the middle of it this error came up:
Error 1905.Module C:/ProgramFiles/Quicktime/GTUIPanelControl.dll failed to unregister. HRESULT -2147220472. Contact your support panel.
i pressed okay twice, and it went through the rest of the process and it says this:
Could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTime/CLSID. Verify that you have sufficient access to that key, or contact your support personel.
all of this is very frustrating, but after i click "ok", it reads this:
The installation of QuickTime did not complete successfully.iTunes requires QuickTime.
Please help!i would like to utilize this ipod sooner than later, obviously.
thank you

http://www.microsoft.com/downloads/details.aspx?FamilyId=0A8A18F6-249C-4A72-BFCF -FC6AF26DC390&displaylang=en
I used that download, which seems to have worked for some people, but not others. It has something to do with downloading a VBScript. Anyway, I did this, but when I tried to complete its download, it said "Error registering the OCX C:\WINDOWS\system32\vbscript.dll"
I then tried to run that file through Run, typing in "regsvr32 %SystemRoot%\system32\vbscript.dll"
I was told it would "reregister" it. Unfortunately, I was met with other error message. ""DllRegisterServer in c:\WINDOWS\system32\vbscript.dll failed. Return code was 0x80004005"
I was told that it had something to do with not having adminstrative privilegdes. I've dealt with these "adminstrative priviledges" before when Norton refused to work, and its no happy mess. But if someone can shed any light on the situation, that would be great.

Syncing ipod nano, received error 13019

Hi,
I need help in this.
I have a 5th gen 16GB ipod nano and 8GB ipod Touch (iOS 5.0.1).
When I want to sync music to the nano, I received error 13019. But when I sync music to iTouch, there is NO error.
Can anybody help me here??? By the way, the iTunes is the latest version and I manually manage my music.
Thanks =)

Hi,
I need help in this.
I have a 5th gen 16GB ipod nano and 8GB ipod Touch (iOS 5.0.1).
When I want to sync music to the nano, I received error 13019. But when I sync music to iTouch, there is NO error.
Can anybody help me here??? By the way, the iTunes is the latest version and I manually manage my music.
Thanks =)

Ipod nano..error message 124..

My ipod keeps getting booted out when i use itunes. It only shows up as removable drive on 'my computer'. It also does not sync my complete library despite having all of the music ticked to sync. I've tried all of the troubleshooting options
HELP>>>ITS DRIVING ME UP THE WALL!

In the subject heading you state "Ipod nano", so if it is a nano, I would recommend that you post in the iPod nano forum which starts here: http://discussions.apple.com/category.jspa?categoryID=154 since different models of iPod are very different when they require support!

Ipod nano usb error msg

Purchased nano last month, charged it and used it until today when it needed recharge. Plugged it into USB port and got this message:
"One of the USB drivers has malfunctioned and windows does not recognize it. Click here." Then I got "unknown device". Then "windows has stopped device because it reported a problem (Code 43).
I then made sure software and driver was loaded - then tried my Ipod shuffle which worked fine in either of the ports.
I can't turn my new Nano on or get iTunes to recognize it.
What happened??? Can anyone help me?

Hey Wanda32,
Thanks for using Apple Support Communities.
Looks like the iPod is not being recognized correctly. Take a look at these 2 articles, they have good information to help you resolve this.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
Have a nice day,
Mario

New iPod Nano 4G error message

I just bought a new 16GB Nano 4G and when I connect it to my G4 Mac tower (10.4.11) it comes up with the following error "An iPod has been detected but could not be identified correctly...."
My work computer is Windows and I've connected my iPod to it and it seems fine. My question is this... How can I reformat my iPod for Mac if I can't even get it to mount on my Mac? (Or do I need to do something different?)
--Jeff

SUCCESS!!! I had to go back to the original OS that came on my computer. After that I had to reinstall Tiger. It took quite a few times for it to install but now that it has everything is working wonderful. I have to admit I was getting very frustrated, as I had a brand new iPod with none of my near 3,000 songs on it. Thank you for all of your guidance, it is greatly appreciated.

Ipod nano 6G error 9006

Similar Messages

Maybe you are looking for