IPod nano 6g error screen

Nell' iPod c'è scritto Connect to iTunes and restore, lo collego, ma iTunes non lo rileva ma il mio Pc si e da di ricollegare iPod lo faccio stessa cosa, intanto l'iPod ha una schermata in bianco e nero tipo accessibilità

Hello dreyc,
The following article provides information and troubleshooting steps that can help resolve this error.
iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
http://support.apple.com/kb/TS1372
Cheers,
Allen

Similar Messages

Ipod nano 2nd gen screen is scrambled

I have a 2nd gen Ipod nano and the screen is either blank or scrambled. I tried to reboot it by holding down the menu and center button simultaneously and that had worked in the past but not this time. Before I would get the Apple logo on the screen but nothing now.

Have you tried any of the standard 5 r's of troubleshooting yet? If so, and the issue still persists, your iPod's LCD is damaged and needs to be replaced.
B-rock

How much will apple charge me for fixing a cracked ipod nano 6th gen screen??

Well I don't have any warranty and i want to get my ipod nano fixed! So how much will apple charge me to fix a cracked ipod nano 6th gen screen????

They won't actually "fix" the iPod, but instead will replace it with an exact refurbished replica. See this page for pricing.
http://www.apple.com/support/ipod/service/prices/
B-rock

I have an ipod nano and the screen is just white and says ok to disconnect with a tick on. Does anyone know why or how can I sort it!?

I have an Ipod nano and the screen is just white and says ok to disconnect with a black tick on. Can anyone suggest what I can do?

Reset the Nano.
How to reset iPod
B-rock

How much does it cost to get a cracked ipod nano 6th gen screen fixed?

How much will it cost to get mr cracked ipod nano 6th generation screen fixed?

Apple doesn't repair iPods, but they will replace it for a refurbished one. Prices are here:
http://www.apple.com/support/ipod/service/prices/

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

Ipod nano sync error 13019 - I've tried everything suggested.Now I Have a blank Nano. Any suggestions?

Now I have a blank nano.

Hello RonTheStockGuy,
I agree with Ingo2711. Here are the steps to fix the issue:
The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.
p.s.s. To add your playlists back to iTunes:
-Click file at the top of the screen
--move your mouse over library, selecte import playlist
--on the new screen that pops up, navigate to your desktop
--open the playlist folder, select the first playlist, hit ok
--repeat for each playlist exported

IPod Nano 4th gen - screen flickers, won't turn on, isn't recognised by computer or iTunes.

My 4th gen iPod Nano has been playing up.
When I connect it to my computer or a dock, the screen flickers with the Apple logo. Once unplugged, it won't turn back on and the screen goes completely black. I tried to reset it numerous times (both connected and unplugged) but that didn't help at all.
I tried to see if I could fix it by restoring it and putting it in disk mode, but the iPod isn't recognise by any of the computers in my house and doesn't appear in either iTunes or 'My Computer' so that really doesn't help. I'm positive it's not an issue with my computer or USB cable because the other iPods in my house connect just fine.
Any idea on how to fix this?

If you have synced your iPod touch to a computer, it should be relatively easy to fix. Plug the iPod into the computer to which it is synced. Once plugged in, hold the home (square button on front) and the power button on the top for approximately 10-15 seconds. After the apple disappears from your screen a couple times, a new screen will popup indicating to start iTunes on your computer. Once you start iTunes, you will be given the option to begin the restore mode and then choose to restore your particular iPod. Once again, you have to had synced your iPod to a computer to utilize this option. Not sure how I figured it out, but I finally did! Good luck and let me know if it does/doesn't work for you.

First Generation Ipod Nano gives error message when using Windows Vista

I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
Conclusion: Early Nanos work with XP, but do not function properly with Vista.
Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.

All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.

Ipod nano 6gen error message 13019 I have tried soooo much!!!

I have re-installed itunes and reconfigured my ipod back to factory settings but my ipod nano 6gen keeps getting the (error message 13019) please help me sync my ipod!!!!

See this article.
http://support.apple.com/kb/TS2830
Some have been able to resolve it by removing podcasts and/or rebuilding their iTunes library.
http://support.apple.com/kb/HT1451
B-rock

Ipod nano 4GB (error message in itunes)

I receive an error message when itunes is up and my ipod nano is connected. The error message says: The file or directory\iPod-Control\iTunes\iTunesDB is Corrupt and Unreadable. Please run the Chkdsk Utility. Also, no music can be transferred to my ipod. At times a window pops-up saying: iTunesLibrary.itl cannot be read because it was created by a newer version of iTunes. I did download the latest version and still dosn't work!
Can anyone help on the steps to solve this problem?
Thanks!

The only advice I can give it restore everything to it origninal setting and from your Itune snyc everything back in

Ipod nano 6g, error code 1601

hello
I have a problem with iPod nano 6g. When connected to the iMac is not visible. I push all the buttons and wait. It starts to connect and after a while the message: iPod is visible but unrecognized. error 1601??
I would add that for some time does not turn on. Yesterday I connected it to yamaha hifi and work. today again is black.
Please help Maja

Hey MajaPil,
Thanks for using Apple Support Communities.
Looks like you are getting an error when connecting to the iMac.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1600
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Have a nice day,
Mario

Ipod nano 6G error 9006

After several months I found my Ipod Nano again. In the meanwhile, I switched from Android to Iphone 5s and got quite common with ITunes.
ITunes does find the Ipod, but states, that he is in "maintenance mode" and needs to be restored by ITunes - done so, updated ITunes to newest version, IPhone works well, but when downloading newest IPod Nano software, at the end of the 4-5 minutes download I receive error message "unkown error 9006".
I've presed power button together with vol - also for x-times, but unsucessful.
Is there any hint I haven't been able to find via google??
Please advise

That one can indicate a security software issue. In the course of your troubleshooting to date, have you worked through the following document?
Resolve issues between iTunes and security software

Ipod nano, sync error 13019?

Hey! I have an ipod nano and cannot sync it to my itunes. The error '13019' keeps appearing. Any thoughts or suggestions?

Ive fixed this issue before. The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.

Ipod Nano sync error : Hard disk write protected

I have a 2nd gen IPod nano 4 GB. I had Itunes 7.1 installed on my PC when I last synced. A week later my disk crashed and in the new disk I installed Itunes 7.2. When I tried to sync, I get a error message which says " disk is write protected. Please remove write protect and sync again "
Can someone help

No, you can use a third party program like Yamipod, or XPlay2, etc. But I would advise you to download iTunes anyhow, even if you have to go to another computer and then burn it to a CD or something.
12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+ Mac OS X (10.4.4) 3G iPod, iPod shuffle, iPod nano

IPod nano 6g error screen

Similar Messages

Maybe you are looking for