Ipod nano 6G. Where is Nike + iPod tab appears in the iTunes window?

I read manual at page 39.
Upload your steps or workout information to Nike+:
1 Connect iPod nano to your computer and open iTunes.
2 Click Send in the dialog that appears, and then follow the onscreen instructions to set up your Nike+ account. Once you set up your account, a Nike + iPod tab appears in the iTunes window.
3 Click the Nike + iPod tab, and then select “Automatically send workout data to Nike+” if it isn’t selected already.
4 Click Apply.
To view and share your information on the Nike website, click Visit Nike+ in the Nike + iPod pane when iPod nano is connected to your computer, or go to www.nikeplus.com and log in to your account.
But, I dont watch this tab in my iTunes.  Windows 8.1, iTunes 12.1.1.4 64 bit.

I install iTunes 10.7.0.21 at another computer and I watch tab Nike+iPod.
Is iTunes 12.1.1.4 not compatible with ipod nano 6G ?

Similar Messages

  • Hello!! I have an ipod nano classic 2007, i always upload music but today the itunes doesn't read it. What can i do? Tank you

    I have an ipod nano classic and suddenly itunes doesn't read it, only charges the battery. What can i do? Thank you

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod Nano replacement - where has my Ipod gone?

    I have received my replacement package and returned it on 27th November. The website still says apple have not received it, the post office can't give more information because I didn't pay for the postage. I have the proof of postage slip but can't get anymore information from Apple about this. Does this mean I've lost my Ipod?

    Hi Nosha
    Don't worry!
    I posted my iPod to Apple on Nov 25th and have been worried ever since... phoning both Royal Mail and Apple, to no avail!
    Just checked my repair status today and Apple has received it and it states "Product Replacement Pending".
    Things are simply taking much longer than previously anticipated and perhaps the christmas mail is also causing some delays.
    Just hang in there & be patient!
    Merry Xmas
    Sheila

  • Will you still have stock for the refurbished Ipod nano? Where can i get the refurbished ipod nano?

    Will you still have stock for the refurbished Ipod nano? Where can i get the refurbished ipod nano?

    They haven't shown up in the refurbished section for a bit so they may be sold out. You probably will need to use eBay, Amazon, etc

  • I dropped and cracked the screen on my ipod Nano 6G where can I get it fixed

    I dropped and cracked the screen on my ipod Nano 6G - where can I get it fixed?

    At any Apple Store or AASP 

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

    My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

    Do you have any better luck with that if you update to iTunes 10.6.1.7?
    From the notes for the release:
    iTunes 10.6.1 provides a number of improvements, including:
    • Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
    • Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
    • Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
    • Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
    http://www.apple.com/itunes/download/

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iPod Nano 7th gen is not recognised by either PC or iTunes

    So I just downloaded some new MP3 files and was looking to connect my 7th gen iPod Nano to my PC to sync them on.
    Upon connection, I recieved a message from iTunes saying:
    "An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again. If the problem persists, uninstall iTunes, then install iTunes again."
    Not only have I disconnected and reconnected the iPod more times than I can count, I have stopped the iTunes service once, restarted my PC twice, reset the iPod four times, unplugged my printer's USB, checked the cable (it is the original iPod cable) and a whole host of other things in order to get it to work. I still cannot get my PC or iTunes to recognise the iPod.
    Please, any ideas? I'm really stuck here...

    Hi there  - I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
    1) iTunes
    2) Apple Software Update
    3) Apple Mobile Device Support
    4) Bonjour
    5) Apple Application Support
    Then you restart your computer.
    Then you install the latest version of iTunes (which will reinstall all those things you uninstalled).
    Then you restart your computer again.
    Mine is working perfectly again now.
    I hope it works for you,
    Carmen.

  • Ipod nano wont restore~error 1433, ipod nano wont restore~error 1433, ipod nano wont restore~error 1433

    my ipod nano wont restore ~ error 1433 what to do

    Hi, got the same problem as kerry221. The proposal given by stevejobsfan0123 did not solve it.
    Additionally iMac does not shut down after closing iTunes. Need to manually shut down the iMac.
    Problem occurred after last software update.
    Open for any further proposal :-)

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

    I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
    Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
    I want to offline update with iTune.Can I get firmware 1.2 update file.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • Can I synch an ipod nano 6th generation with Mac OSX 10.4.11 with Itunes 8.02?

    Can I synch an ipod nano 6th generation with Mac OSX 10.4.11 with Itunes 8.02?

    No.  You need at least Mac OS X 10.5.8 or later as well as iTunes version 10.1 or later.  Sorry.
    B-rock

  • Bought a new iPod nano.  Trying to download and install latest version of iTunes, but it says I need OS 10.7 or greater to install it.  I have 10.58.  What to do?

    Bought a new iPod nano.  Trying to download and install latest version of iTunes.  When i try to  install downloaded program, I get a message that says OS10.7 is required.  I have OS10.58.  What to do?

    Choose About this Mac from the Apple menu.
    If you have a PowerPC Mac, buy a new, secondhand, or refurbished Intel Mac.
    If you have an Intel Mac, phone the online Apple Store and order a Mac OS X 10.6 DVD.
    (71523)

Maybe you are looking for

  • Check Confirmation Window No Longer Appearing (2005A SP01)

    Hello, What changes in either Document Settings or Print Preferences or Checks for Payment PLD would result in the Check Confirmation screen no longer appearing after the printing of Checks for Payment?  We have tested all of the layouts, including t

  • Getting an exception error when adding a server to a cluster

    I am using WL 6.0 and have configured a "Machine", two "Servers" and a           "Cluster", and I want to create two servers on a single machine in order to           test some clustering issues.           I am using the default "myserver" as one of

  • Filesharing with Windows over Airport Express

    Hi, I have a windows xp network that is set up as follows cable modem -> Linksys BEFSR41 rougter -> Airport the linksys goes off to a few computers and the airport express, now the networks is working beautifuly for internet access, but i am stuck wh

  • Delegation with BO BUS2078

    Hello! I'd like to create a workflow which gets triggered by the event CREATED of BO BUS2078 (quality notification). Because I need new functionality in my workflow I've created subtype ZBUS2078 and configured delegation. Unfortunately event triggeri

  • Line shape missing from selection

    The line and ploygon selections are missing out of my project Shapes dropdown, but if I create a new project they are there.  What did I do to hide them and how to I get them back Thanks