Ipod nano 6gen error message 13019 I have tried soooo much!!!

I have re-installed itunes and reconfigured my ipod back to factory settings but my ipod nano 6gen keeps getting the (error message 13019) please help me sync my ipod!!!!

See this article.
http://support.apple.com/kb/TS2830
Some have been able to resolve it by removing podcasts and/or rebuilding their iTunes library.
http://support.apple.com/kb/HT1451
B-rock

Similar Messages

  • First Generation Ipod Nano gives error message when using Windows Vista

    I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
    The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
    Conclusion: Early Nanos work with XP, but do not function properly with Vista.
    Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.

    All of the following programs should work with Vista.
    Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.
    SharePod is also freeware.

  • Ipod nano 4GB (error message in itunes)

    I receive an error message when itunes is up and my ipod nano is connected. The error message says: The file or directory\iPod-Control\iTunes\iTunesDB is Corrupt and Unreadable. Please run the Chkdsk Utility. Also, no music can be transferred to my ipod. At times a window pops-up saying: iTunesLibrary.itl cannot be read because it was created by a newer version of iTunes. I did download the latest version and still dosn't work!
    Can anyone help on the steps to solve this problem?
    Thanks!

    The only advice I can give it restore everything to it origninal setting and from your Itune snyc everything back in

  • Ipod nano..error message 124..

    My ipod keeps getting booted out when i use itunes. It only shows up as removable drive on 'my computer'. It also does not sync my complete library despite having all of the music ticked to sync. I've tried all of the troubleshooting options
    HELP>>>ITS DRIVING ME UP THE WALL!

    In the subject heading you state "Ipod nano", so if it is a nano, I would recommend that you post in the iPod nano forum which starts here: http://discussions.apple.com/category.jspa?categoryID=154 since different models of iPod are very different when they require support!

  • My Iphone won't back up to my itunes account on my computer when I plug it in, It syncs but when it tries back up I get an error message. I have tried to restore it to the last time it was backed up but still it didn't work.

    Hi,
    I got my iphone last year and It was working just fine until June of this year and I didn't notice it until I tried plugging my iphone into my computer to get more songs on it. Error message came up saying that it was unable to backup iphone because an error occurred. So I did some research and tried to delete old backups and restore to the last one. After all that it still won't back up and some of my apps just don't work, thought the new ios would help but it did not. Everything works fine its just that I want to be able to back my phone up and I haven't been able to sync June. Any help would be appreciated.

    For your computer first get iTunes to see it by:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - The transfer iTunes purchases
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Or redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - Transfer other music by using a third-party program like one of those discussed here:
    newer copy
    - Connect the iPod to your compute and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the backup that iTunes makes does not included synced media like apps and music.

  • I get the -1 error message when i have tried to restore my iphone, the phone will no longer work how can i rectify this?

    I have tried to restore my iPhone but when it has gone through all the restore I get the -1 error message and now my phone will not work at all, how do I rectify this please.

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • I am trying to update my CS 6 so it can read the RAW from my NIKON D7000 and do get error messages allthe time have tried for a few month now and have not been able and not been able to get any support help either and I think i is realy BAD What to do????

    Cant open my Raw from my NIKON D7000 in Photoshop and cant down load updates get error messages all the time have tried at least ten times and tried to get help from support but not succeeded.
    Very bad I think but what to do????
    Ulf

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • Scripts error message. I have tried to ensure that I have met all installation requirements.

    About a week ago, I started getting a message saying that my flashplayer was out of date and needed to be updated.. I have tried several times to update and it will allow me to run the update installer. After watching the progress bar get to 100%, I keep getting a scripts error. The following is a copy of the error message I am getting :

    What is your operating system & version?
    What is your web browser?

  • My ipod nano is not turning on,I have tried many different things.help asap

    My ipod nano is not turning on. I've tried many different things to turn it on such as press and hold menu and the select(center) button for 6-10 seconds and wait for ipod logo to appear. that does not work for me. Also the one where I move the button on the upper part of the ipod nano and moving it to the hold position and back and there againa and back. nothing seems to work...PLEASE HELP ME ASAP!! my friend thought that the battary could be so dead that it is not turning on at all. I remember charging it for about 4 hours and having full battary and the next day after charging the ipod nano it went dead!! it just shut off. what should i do...help me
      Windows XP  

    Go step by step.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • New iPod Nano 4G error message

    I just bought a new 16GB Nano 4G and when I connect it to my G4 Mac tower (10.4.11) it comes up with the following error "An iPod has been detected but could not be identified correctly...."
    My work computer is Windows and I've connected my iPod to it and it seems fine. My question is this... How can I reformat my iPod for Mac if I can't even get it to mount on my Mac? (Or do I need to do something different?)
    --Jeff

    SUCCESS!!! I had to go back to the original OS that came on my computer. After that I had to reinstall Tiger. It took quite a few times for it to install but now that it has everything is working wonderful. I have to admit I was getting very frustrated, as I had a brand new iPod with none of my near 3,000 songs on it. Thank you for all of your guidance, it is greatly appreciated.

  • TS1286 Hi, I am trying to restore my i-phone 4 and keep getting error messages 2001 & 2006. have tried to follow directions but no success. Any suggestions??

    Hi. I am trying to restore my iphone 4. Keep receiving error codes 2001 7 2006. Have followed instruction on web, No success. Any help ouy there??

    It may be related to conflicting security software.
    If the errors persist on another computer and known-good USB cable, the device may need service.

  • TS1424 My itunes is working fine but my store will not open.  I see a loading bar but no store and no error message.  I have tried reinstalling nothing works.  On the store page I just get the copy rite but no store.

    My operating system is OS 10.5.8 itunes 7.0.2 any help would be appreciated.

    Just realized that my phone will not sync with itunes either and it does sync to iphoto.

  • Have a ipod nano 5th gen., keep getting error message 13019!!!

    I have an ipod nano, 5th gen. Yesterday when I tried to sync music I received error code 13019. I tried unsyncing music, resyncing,...finally ended up restoring, resetting..nothing worked. All updates are current on itunes and ipod. This has never happened. There is no voice memos options on playlist either. Please help!

    So you worked through the suggestions in this Apple support document then?
    iTunes displays a -69 error when syncing iPod
    B-rock

  • Ipod nano sync error 13019 - I've tried everything suggested.Now I Have a blank Nano. Any suggestions?

    Now I have a blank nano.

    Hello RonTheStockGuy,
    I agree with Ingo2711. Here are the steps to fix the issue:
    The steps are kinda long but they work.
    This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
    -Open itunes
    --click, edit, click preferences
    --select advanced
    ---make a note of the iTunes media folder location on a notepad.
    ---put a check in organize files
    ---take the check out of copy files
    ---click ok
    --Click file, at the top of iTunes
    --move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
    At this point, if you have playlists you want to save:
    -Create a folder on your desktop, call it, playlists
    --Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
    --right click the playlist, select export playlist
    --Navigate to your desktop and open the playlist folder and save.
    ---Do this for each playlist you want to save
    -Close itunes
    -Click your start button, and open computer or my computer
    --Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
    --Open the iTunes folder.
    --Stop here
    -You will see icons that look like folders and you will see icons that look like files-
    -You will KEEP the FOLDERS
    -You will DELETE the FILES
    --If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
    --That was the magic--
    -Disconnect your iPod if connected.
    -When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
    -Click file at the top
    --Select, add FOLDER to library, not to be confused with add file.
    --In the window that pops up, locate and click on computer or my computer
    --From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
    --Click the iTunes music/media folder one time so it highlights.
    --On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
    All you music will start to import back into iTunes.
    -Plug in iPod after completed
    --a message pops up about being synced with a different library.
    --Click erase and sync
    --Watch all your songs go on your iPod with no error message.
    From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
    Hope this helps!!!
    Julian
    p.s. Follow the directions exactly.
    p.s.s. To add your playlists back to iTunes:
    -Click file at the top of the screen
    --move your mouse over library, selecte import playlist
    --on the new screen that pops up, navigate to your desktop
    --open the playlist folder, select the first playlist, hit ok
    --repeat for each playlist exported

  • Hello - I am trying to sync my ipod touch with itunes and I have done many times and now today I am getting error message 13019. I have listened to all the suggestions of how to fix it from apple and now I lost all my music off my ipod. HELP?

    Hello - I have been getting error message 13019 all afternoon and I have never had that before. I have listened to all the suggestions on this site and nothing has helped. And know I have lost all the music off my ipod (luckily it is still on itunes) I really need this figured out asap since I leave on vacation in 4 days! Please somebody help. I have never had so many issues

    When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
    Hope this help

Maybe you are looking for

  • Error from EAS - "refreshing security from Shared Services failed"

    Hi, I was using Native only security in HSS for Essbase 11.1.1.3 and EAS allowed me to Refresh security from Shared Services. (Essbase security was already externalized to HSS.) However, after I added "MS Active Directory", and provisioned a MSAD use

  • Applet accidentally requests Java Core API classes from network

    Hi, starting an applet from a customers client machine (IE7, Windows XP, Standard JRE Installation of Java 1.6.0_26), I see in the tomcat access log entries signalizing that core java api classes are accidentally requested from the server: "GET /mywe

  • WRT160N mac address to use for dhcp reservation

    I have to reserve this one router's MAC address in the main router for the building. Both routers in question are WRT160Ns. The router I have to reserve's MAC address ends in 5A (on the bottom of the router, and in the ARP table when connected via wi

  • Urgent help on WAD(web application designer

    Hello can any one provde documentation on BEX WEB APPLICATION DESIGNER. NAg

  • SOFTWARE PROBLEM HELP!!!

    HELLO, THIS IS A HUGE PROBLEM AS MY PHONE IS SO IMPORTANT TO ME AND I USE IT FOR EVERYDAY LIFE I HAVE RESENTLY HAD MY PHONE GO MISSING AND THEN RETURNED TO ME BY SOMEONE THAT CONTACTED ME AS I HAVE MY CONACT IN THE BACK OF MY CASE. BUT MEAN WHILE I H