IPod nano 6th gen digitizer issues

Hi,
I recently replaced the battery in my oow ipod nano 6th gen. After replacing everything, it booted up fine, but now the touch screen capabilties are not working. I took apart another oow 6th gen nano and I get the same result.
I went to the diagnostics menu and whenever I press "Sensor Test" it says Please Wait and will flash back to previous menu. The same happens with "IC version" and when I check for errors, it says No IC error reported. It's a bit confusing.
Does anyone have any ideas?
I appreciate your help!
CJ

Bump

Similar Messages

I have updated to windows 8.1 from windows 8. My ipod nano (6th gen) is no longer identified properly in itunes. I have tried all steps in the troubleshooting guide but it has not resolved the issue. What can I do?

My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

My ipod nano (6th gen) keeps connecting and disconnecting itself from my computer can anyone help?

I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
Thanks

I too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated.

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

Ipod Nano 6th gen not syncing mp3s after itunes 11.1.4.62 update

As the title says, after updating itunes to the 11.1.4.62 update, and everything that doing that successfully involved such as completely uninstalling all Apple software and then reinstalling itunes, my ipod nano 6th gen will not allow itunes to sync any mp3 files to it. The only way to get any new files onto it is to let the ipod convert them into AAC files when you transfer, even though all other music files on the ipod are, and have always been, mp3 files. Everything worked fine before the latest itunes update, I could sync mp3 files to the ipod nano with no problems.
Anyone know of a solution to this issue, or whether Apple are working on a solution for this obviously botched itunes update?
Thanks in advance.

Hello MarkLesch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that your computer meets the minimum system requirements
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
Best of luck,
Mario

Ipod nano 6th gen damages headphones with an inline mic?

I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself. at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone. they worked perfectly on the iPhone for several weeks. I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc. When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged. That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
Has anyone experienced this problem before when using earbuds with an inline remote / mic? is it possible that the earbuds are not compatible with the iPod? i am worried that this is a hardware issue and cannot be fixed by software update....

Did you try doing a Reset on the iPod (which restarts the iPod)?
http://support.apple.com/kb/ht1320
If that does not help, you may want to also try doing a Restore of the iPod in iTunes.
http://support.apple.com/kb/ht1339

IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
This is what happens:
When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
I have also restored the device in itunes, with no luck.....
Thanks in advance for any useful answer!

Thanks for your answer...
The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

IPod Nano 6th Gen - Functional but white screen on pressing wake/sleep button

Hi
I have an iPod Nano 6th Gen (out of warranty & applecare) - hasn't been dropped etc & never had any trouble.
This morning I got the white screen after unplugging it from charging.
I have tried hard reboot (power button + vol down). I have put it into disc mode (hard reboot + both volume buttons) and restored it to factory settings from itunes (10.6.3) . I've even put it into diagnostic mode and looked around to see if there were any tests I could do.
Functionally the ipod works ok - plays music, volume changes, and it will shuffle on shaking/ play pause on double pressing the power button.
The problem is when I switch off the screen by pressing the power button once - if I try to switch the screen on again I only get the white screen (although this doesn't affect music playing etc).
The way to get around this is either doing a hard reboot (which is a pain as it removes all my settings) or by switching off the ipod, waiting 5 minutes, then switching it on again (this preserves my settings). If I switch off the ipod and try to switch it back on within 5 mins, it's straight to the white screen.
The only other odd thing I noticed was that the screen was shaky/jolty and graphics not quite lining up etc, but this only lasted 10s and went once I started playing music...
Any ideas as to what is causing this? I'm guessing maybe a hardware problem but it seems strange that there is no white screen on switching on, just from waking.
It was a present from my dad and I'm very fond of it so would like to keep it/fix it if possible!
Thankyou!

Hello bfsf,
Welcome to the Apple Support Communities!
I understand that your iPod nano (6th generation) displays a white screen after waking from sleep. First let my say that you have completed some great isolation and troubleshooting steps on your own. Because the issue is still present after the fantastic troubleshooting you already completed, it may be necessary to have this iPod evaluated for service. If you would like more information on this process, please read over the information in the attached link.
Apple - Support - Service Answer Center
Cheers,
Joe

IPod Nano 6th Gen needs a restore every day...?

My iPod Nano 6th Gen works well for arond 24 hours but every morning when i wake up it says it needs to be restored using iTuunes.
When I restore it, it works perfectly. No problems at all. I can fill it to capacity with music and it works all day. The next morning, the battery is still really close to fully charged, but the iPod is in recovery mode. I've scoured the internet but haven't found anyone with a similar problem.
Generally, I've read about iPods that will not restore, or that, even after a restore, will remain in recovery mode, which is indicative of moisture or some other malady.
This Nano has been well cared for and is in flawless condition in every way aside from the condition mentioned. Not even a scratch or smudge. I'm baffled.
Has anyone experienced a similar problem? I love to use the smaller ipod when running or bike riding, but am stuck restoring it each day I choose to use it over my Classic 160's.
Any help is appreciated.

Ok, here is a bit of an update on the issue.
For the last two mornings, when the Nano says it needs a restore, I've hard reset it (holding down both the select/menu and volume down button simultaneously), then, when the apple logo shows, I held down the menu and the volume up button simultaneously, which then restores the ipod back to functioning properly (I think I read that this is supposed to put the ipod into disk mode, which it doesn't do on this Nano, obviously).
Aside from being annoying as all get up, I suppose the ipod is working, so it's a minor victory.
Still, does anyone know why this might be happening every single night? The battery is still completely charged and once I do the aforementioned sequence, the ipod works perfectly until the next day.

Ipod nano 6th gen, wierd functionality problems

I got this ipod nano 6th gen refurbished from apple a year back. I just started using it and found that after I synced it with my itunes, i have the following problems :
1. The screen display is opposite than my previous ipod (landscape vs portrait).
2. I have to manually change to next song most of the time.
3. When I change songs, it plays a song a few seconds and then skips a few before stopping on a song.
4. The song playing is not the song displayed on the screen.
Tried restoring to factory settings. Same issues. Can someone help?

Hi zenpal1,
If you are having multiple issues with your iPod nano that persist after a factory restore, you may need to have your iPod evaluated or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

Ipod nano 6th gen askinh for resore every time i connect and after the restore not showing the sysnced song on ipod

i have a ipod nano 6th gen, few days back when i tried to add few songs through iTunes it gave me error that it "can't connect to ipod . restore it" so i did and after that i synced al the songs and it showed that my my empty ipod has been up few GB's. after i disconnected , i could not see any song on the ipod . when it connected back the ipod the got same error about restore. i dont know what to do now , please help.

Hello Singhindia,
It sounds like you restored your iPod Nano when iTunes prompted you and it appears to sync. When you disconnect it and look at the content, the songs arent there, and when you plug it back into iTunes you get the same message again. I would recommend these troubleshooting sections from the following article to help isolate the issue to hardware or software:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Verify that iTunes is installed and updated
Restart the computer
Verify that Apple Mobile Device Support is installed
Verify the device's USB connection
Verify that the Apple Mobile Device Service and iPod service are both running
Verify that the Apple Mobile Device Driver is installed
Remove and reinstall iTunes
If the issue continues, gathering iPod Diagnostics may be helpful for you or for support personnel in identifying the issue.
Additional Information
Certain phone connectivity software from vendors such as Samsung, Nokia, Bora, Novatel, and Sony may also cause this issue. If you have such software on your computer:
Uninstall your Samsung, Nokia, Bora, Novatel, or Sony phone connectivity software and test. Contact the manufacturer of this software for assistance in doing this.
Remove iTunes and all related Apple software by following this article (for Windows XP), or this article (for Windows Vista and Windows 7).
After reinstalling iTunes, test the iPod nano.
If you still need your phone connectivity software that was removed, reinstall this software and test your iPod nano to ensure it still functions with iTunes. Contact the vendor of your phone connectivity software if the issue returns.
While the error message is different than you are seeing, the troubleshooting is relevant for you.
Thank you for using Apple Support Communities.
All the best,
Sterling

My ipod nano 6th gen will only turn on when plugged into a power source.

My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions?

Howdy mela1223,
If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer.
Restoring iPod to factory settings - Apple Support
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Thank you for using Apple Support Communities.
Take care,
Sterling

IPod nano 6th gen skips songs mid track

Hi there! I was wondering if anyone else has encountered this issue?
Ive had my iPod nano 6th gen for a couple of weeks now and really enjoying it except when its in my speaker dock where it will occasionally play half a song, bleep, then switch to a new track! (rather annoying when you're belting out a song a it changes half way through!!!) I've also noticed that I will select an album or a particular artist to play, then when this happens and the new song will come from the main playlist!
I haven't noticed this when I have my headphones in!
This is the only thing that's bugging me about the iPod! Otherwise it's a fab piece of kit!

Head to Settings and make sure the Shake to Shuffle feature is turned Off.
B-rock

Cant get any life in my ipod nano 6th gen

hi please can anyone help me i have an ipod nano 6th gen touch screen and can not get it to turn on or to reset have tried it on my computer and still nothing i have reinstalled itunes it does not show up on itunes or my computer no matter what i do it aint working please help

Hello there mrskam,
Here is the article that I would recommend for the issue you are describing. You have done some of the troubleshooting already, but thats ok, just follow it through to the end, and one way or another you will have a resolution.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
Take care,
Sterling

IPod nano 6th gen digitizer issues

Similar Messages

Maybe you are looking for