Ipod nano 6th gen not recognised at all in itunes or windows

Nano was recognised as a device first two times i used it but now not recognised in itunes or in my computer as an ipod. Followed various help suggestions but no change. Does t need software restoring and if so how if not recognised in itunes?

This problem now solved after a few hours browsing Apple help and other forums like this - tried connecting through usb ports at rear of computer instead of front and instantly itunes recognised it.  Odd since I can still connect my camera through front usb ports - the mystery of computers eh?  Anyone know how to fix front usb ports?

Similar Messages

  • Ipod Nano 6th gen not charging at all

    I have an Ipod Nano 7th Gen whichn was bought in Nov 2012 for my daughter.  the problem is that when I connect the Ipod to the computer to charge all of a sudden it is just not working at all.  And gives the error (USB Device not recoginesed) 'One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.'  Can some one please help 

    Ok thanks all but got the remedy from a guy that had the same problem on the IPad.  All one has to do is to press the power button and the home butoon together for 10sec and it will reset the Ipod

  • Why won't my ipod nano 6th gen not show up on my iTunes or on my computer?

    I have gone through all of the steps to make it work, but still no luck. What should I do? It has never done this before.

    Hi riciatay42,
    Welcome to the Support Communities!
    The article below should help you with this:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the USB Drivers are installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    If this does not resolve the issue, you may need to remove iTunes and all of its components as outlined in this article:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    I hope this information helps ....
    - Judy

  • HT2905 How do I delete playlists from my ipod nano (6th gen.) when I am in itunes? I right-click it but it does not give me an option to delete.

    How do I delete playlists on my ipod nano (6th gen.) when I am in itunes???  I right-click and it won't give me an option to delete.

    Hello there, 209girl.
    The following Knowledge Base article provides the steps for how to delete your playlist:
    iTunes 11 for Mac: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH12159
    Additionally, the iPod User's manual shows how to delete it from the iPod itself (on page 26):
    iPod (6th Generation) User's Guide
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipod nano 6th gen not recognized in itunes

    I recently purchased a used "AS IS" ipod nano 6th gen. The only problem with it is that it's not recognized by iTunes. I was fairly sure on purchasing it that solving this would be as simple as resetting it, or, at worst, figure it out by googling the problem. The method involving holding down the sleep/wake button and volume down for 8 seconds until the apple logo appears didn't help. Putting it in disk mode didn't help. I have a mac and I suspect the original owner of the ipod may have used windows, so I tried both of these things again with my dad's PC. I at least got some response--an error message saying the usb device couldn't be read or something of that sort (I can look up the exact message again tomorrow if it's relevant).
    I don't think it's the USB plug or cord, because both of these work with my iphone and another ipod nano in the household. I don't think it's itunes either, for the same reason. I'm running Lion, fully up-to-date, on a Macbook Pro. ITunes is also fully up-to-date.
    I wouldn't be devastated if I can't fix it, since it still charges and plays music (the previous owner's hip-hop/club type music works pretty well for workouts), and it's probably not worth it to me to pay Apple to repair it. But…if anyone has any suggestions for things I can try to get it totally working, I'd love to hear them!

    solved it :-)
    Apparently it's not enough to reinstall iTunes itself, but all mobile device software should be uninstalled, then your pc has to be rebooted and then iTunes has to be installed again.

  • Ipod Nano 6th gen not syncing mp3s after itunes 11.1.4.62 update

    As the title says, after updating itunes to the 11.1.4.62 update, and everything that doing that successfully involved such as completely uninstalling all Apple software and then reinstalling itunes, my ipod nano 6th gen will not allow itunes to sync any mp3 files to it. The only way to get any new files onto it is to let the ipod convert them into AAC files when you transfer, even though all other music files on the ipod are, and have always been, mp3 files. Everything worked fine before the latest itunes update, I could sync mp3 files to the ipod nano with no problems.
    Anyone know of a solution to this issue, or whether Apple are working on a solution for this obviously botched itunes update?
    Thanks in advance.

    Hello MarkLesch,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Verify that your computer meets the minimum system requirements
    Verify that iTunes is installed and updated
    Restart the computer
    Verify that Apple Mobile Device Support is installed
    Verify the device's USB connection
    Verify that the Apple Mobile Device Service and iPod service are both running
    Verify that the Apple Mobile Device Driver is installed
    Remove and reinstall iTunes
    Best of luck,
    Mario

  • Ipod nano 6th gen not showing in iTunes Windows 8

    My ipod nano 6th gen is not showing up in itunes.  I run Windows 8.  Have tried all the apple.com trouble shooting advice.  Help!?!? 

    Hi there franscard,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • IPod Nano 6th Gen not syncing and prompted to re-install iTunes

    my iPod Nano 6th Gen connects on my computer but not recognized by iTunes. I have already tried reinstalling the software as prompted by it but nothing happens

    iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
    You can send feedback on the upgrade here:  http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

  • Ipod nano 6th gen not recognized by itunes

    I recently updated my version of itunes and now whenever I plug in my ipod nano 6th gen an error message pops up saying it doesn't recognize my ipod. Why odes this even happen?

    For anyone else having this problem, I found this solution to work. Try this first:
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.
    d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh install of iTunes, everything came back and is should work. Hope it helps.
    <Link Edited By Host>

  • Nano 6th gen not recognized even after downloading itunes

    nano 6th gen not recognized even after downloading itunes

    Well I'm not at all technical so all I can tell you is the docking station is plugged into a wall socket - and the cable is the original one that came with the docking station, and my other iPod, which is about 5 years old charges fine on the unit, it's driving me bonkers!!!! Thanks

  • Ipod nano (6th gen) not being recognised on itunes upgrade

    Since upgrading to the new itunes my 6th gen ipod nano isn't being recognised. I've gone through all the given steps on here but nothing is working. Any ideas? Thanks

    Hello ella555,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    If the issue remains after following your iPod's troubleshooting assistant, follow
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Best of luck,
    Mario

  • Ipod nano 6th gen, not synching with itunes

    My ipod is not showing up in itunes - it shows up in 'my comp' but not in itunes.  On my ipod screen it synchs for approx 5secs then stops and i get a box with 'an ipod has been detected but was not recognised'  i have tried all the suggestions on the site but no joy.  I live really far away from a store so travelling to a genius bar isn't really possible.  Anyone have any suggstions?  Also is it possible to restore the 6th gen - as i cannot synch to itunes?

    anyone?

  • Ipod nano 6th gen. not syncing with itunes match

    After the new itunes 11 release I cannot sync my Ipod nano 6th generation with Itunes match without downloading all the songs I want to copy to my ipod to the computer first.
    It is a little compersome to download 8Gb to my mac just for syncing and after sync delete them from my computer so that I just stream it again (airbook simply does not have enough space)

    iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
    You can send feedback on the upgrade here:  http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

  • Ipod Nano 4th Gen not recognised in Windows Vista, Windows 7 or Itunes and screen blank

    Hello,
    I have a quite old (3-4 years old) iPod Nano 4th Gen.
    The screen is blank, which means it needs charging. When I plug it into my laptop/computer then it doesn't show up which im assuming is because it needs charging.
    When I plug it into my plug charger (plugged into a wall) nothing happens.
    I think this is because the cables (I have 3- 2 computer USB cables and one plug charger cable) being too lose and not connecting to the iPhone fully.
    I have looked at all the articles, I have done the R's, I have tried to restore it, I have pressed the clickwheel and centre button together and I have toggled the hold switch.
    If anyone can help it would be appreciated! (And please save the "take it to apple support" etc... comments for if you can't think of anything else- not being rude but I know this)
    Thanks
    BitMyApple

    Hey, I hear ya and can sympathize. I have the same
    issue. The difference is that my computer can "see"
    my ipod but it refuses to show up in itunes itself;
    therefore, I can't put anything on the ipod (from the
    computer) and vice-versa. Apple support is clueless.
    This is very frustrating to say the least. Itunes
    keeps telling me that my ipod is synced to a
    "different" computer, which isn't true. It's the
    same computer. The difference is that when I first
    got the 'pod and used it with this computer (and
    everything worked fine), I was running XP. I
    installed Vista and after that, all the problems
    started. If I ever get this resolved, believe me,
    I'll post something here.
    I'm guessing that somehow, itunes "sees" what
    computer it's hooked to by "looking" at something in
    the OS. Change the OS and it "thinks" it's seeing a
    "different" computer.
    Try reformatting it.

  • IPod Nano 6th gen not syncing despite reset

    My Dad's iPod Nano 6th generation is not syncing with iTunes. He used it first with iTunes on a MacMini G4 and – with later versions of iTunes – ran into trouble while syncing. Now he owns a Mac Mini mid 2010 with a brand new installation of Mavericks on an erased and reformatted harddrive.
    Software's all up-to-date but the iPod still does not sync. It's being recognized and being found spotless by the harddrive tool. iTunes will just show it in the sidebar with no further info on the content of the iPod being displayed except the colored bar at the bottom indicating 430+ songs on the thing. No copying manually is working.
    Switching syncing options to manual and back do not help either, nor does a restart (of either iTunes or the Mac).
    I have reset the iPod but the result in iTunes is now that there is a welcome screen with button «more». As soon as I click that the iPod disappears from the sidebar – with no further action or option.
    I'd be glad to get any help here!

    Figured out the solution: I quit iTunes, dragged the "com.apple.iTunes.plist" file (located in Library –> Preferences) to the desktop and reopened iTunes. After confirming the t&c pop-up I plugged in the iPod and it's window appeared again in full, letting me sync contents once again.

Maybe you are looking for

  • APEX_UTIL.GET_PRINT_DOCUMENT Error Unable to get the document

    Hi,    I am working on Oracle APEX 4.1 to send the report as an attachment through mail  I am unable to get the document while calling the APEX_UTIL.get_print_document. I have created a report query and report template (rtf template) so as to send th

  • Problem synchronizing clips

    Hi, I am trying to synchronize two video clips, one which has two different audio tracks (CH1 on board, CH2 tie clip) and a second camera with an on board mic). So far FCPX does not synchronize these correctly. I have tried setting in points first. I

  • Samba - refuses to authorise

    I bought a new MacBook running 10.6.2 as my dear old G4PB finally gave up the ghost. I wish I hadn't... In 20 years of using a Mac this is, by a long way, the worst experience I have had. The latest problem - of far, far too many - involves Samba. At

  • Screen went blank,no power, even when I plug in, nothing happens.

    Screen went blank, lost all power. plugged it in, still nothing happens.

  • Add a new line item in VA01/VA02 using user exits.

    Hi Experts, I have a problem regarding adding of line items in VA01/VA02. I was able to add a line item but my problem is, there is no validation for the added line. I want SAP to validate it before posting it to database. I'm using USEREXIT_SAVE_DOC