Ipod nano 6th gen not recognized by itunes

I recently updated my version of itunes and now whenever I plug in my ipod nano 6th gen an error message pops up saying it doesn't recognize my ipod. Why odes this even happen?

For anyone else having this problem, I found this solution to work. Try this first:
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install.  It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.
d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh install of iTunes, everything came back and is should work. Hope it helps.
<Link Edited By Host>

Similar Messages

  • Ipod nano 6th gen not recognized in itunes

    I recently purchased a used "AS IS" ipod nano 6th gen. The only problem with it is that it's not recognized by iTunes. I was fairly sure on purchasing it that solving this would be as simple as resetting it, or, at worst, figure it out by googling the problem. The method involving holding down the sleep/wake button and volume down for 8 seconds until the apple logo appears didn't help. Putting it in disk mode didn't help. I have a mac and I suspect the original owner of the ipod may have used windows, so I tried both of these things again with my dad's PC. I at least got some response--an error message saying the usb device couldn't be read or something of that sort (I can look up the exact message again tomorrow if it's relevant).
    I don't think it's the USB plug or cord, because both of these work with my iphone and another ipod nano in the household. I don't think it's itunes either, for the same reason. I'm running Lion, fully up-to-date, on a Macbook Pro. ITunes is also fully up-to-date.
    I wouldn't be devastated if I can't fix it, since it still charges and plays music (the previous owner's hip-hop/club type music works pretty well for workouts), and it's probably not worth it to me to pay Apple to repair it. But…if anyone has any suggestions for things I can try to get it totally working, I'd love to hear them!

    solved it :-)
    Apparently it's not enough to reinstall iTunes itself, but all mobile device software should be uninstalled, then your pc has to be rebooted and then iTunes has to be installed again.

  • Ipod nano 6th gen not showing in iTunes Windows 8

    My ipod nano 6th gen is not showing up in itunes.  I run Windows 8.  Have tried all the apple.com trouble shooting advice.  Help!?!? 

    Hi there franscard,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • IPod nano (4th gen) not recognized by iTunes 11.1.3

    I have an iPod nano (4th gen). After upgarding iTunes to v 11.1.3 (MacBook Pro) I get the follwoing message:
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.
    Unfortunately, I restored to factory settings, which erased everything, but each time I connect the iPod I get the same message.
    It must be an issue with compatibility because I get the same message with my wife's iPod (same gen), but hers syncs just fine on her iTunes (v 10), and I get the same message using two different USB cables.
    So now my iPod is essentially empty (factory settings) and as good as a paperweight unless there is a way to get iTunes to recognize and sync. If I could get past the error message, I suspect it would be easy to sync automatically or manually.
    Any help would be appreciated.
    Thanks

    Hi JMfromMN,
    Thanks for using Apple Support Communities.  If your iPod isn't recognized by your computer, this article may help:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Since your wife's iPod displays the same behavior omn your computer, it sounds like the troubleshooting for the iPod itself (which you've largely already done anyway) can be skipped.
    Cheers,
    - Ari

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Ipod nano 6th gen. not syncing with itunes match

    After the new itunes 11 release I cannot sync my Ipod nano 6th generation with Itunes match without downloading all the songs I want to copy to my ipod to the computer first.
    It is a little compersome to download 8Gb to my mac just for syncing and after sync delete them from my computer so that I just stream it again (airbook simply does not have enough space)

    iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
    You can send feedback on the upgrade here:  http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

  • Ipod nano 5th gen not recognized by itunes

    Having same issue as other post except that I'm on XP home instead of a Mac. Windows recognizes the Ipod but Itunes does not. I've tried a number of the tips I've read about in the support section, but no luck. 2nd Gen Nano and Shuffle work fine and are recognized by Itunes. I was able to charge the 5th gen Nano but it was never setup since it was not recognized.

    Sorry about posting in Ipod discussion instead of Nano 5th gen discussion. I was probably half awake.
    I spent a lot time messing around with my computer with no luck. Finally contacted an Apple expert and though the rep was not able to solve the issue with me, he pointed me in the right direction. My fix was actually quite simple:
    I downloaded Itunes onto my wife's laptop and plugged in the Nano. The setup worked and Itunes recognized it. I was able to update the latest software for the device. I moved some music files over with the Homeshare feature just in case I would not be able to use my PC. Luckily when I plugged the Nano back into my PC, Itunes recognized it.
    It was either the initial device setup or the update that I needed to resolve the issue on my PC. So try it on another computer if you similar issues before you waste a lot of time and effort.

  • IPod Nano (3rd gen) not recognized by iTunes

    I've got a 933mhz iBook G4 running 10.5.1, I hooked up my brand new iPod Nano, iTunes recognized it, I was halfway through the syncing process when I decided to stop it during the photo sync. Now the iPod keeps shutting down right after it tries to sync then starts back up again. It's not recognized by this computer at all. I tried to hook it up to my G5 iMac, and no go there. Ideas anyone?

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • Ipod nano 6th gen, not synching with itunes

    My ipod is not showing up in itunes - it shows up in 'my comp' but not in itunes.  On my ipod screen it synchs for approx 5secs then stops and i get a box with 'an ipod has been detected but was not recognised'  i have tried all the suggestions on the site but no joy.  I live really far away from a store so travelling to a genius bar isn't really possible.  Anyone have any suggstions?  Also is it possible to restore the 6th gen - as i cannot synch to itunes?

    anyone?

  • Ipod nano 6th generation not recognized by itunes

    Whenever i plug in my 6th generation nano (the little one with the touch screen), iTunes tells me it knows there is an iPod connected, but it cant be identified properly. Ive tried resolving it with all the help on iTunes and nothing has worked. Any ideas?

    The most likely culprit is that you have an older version of iTunes. You'll want iTunes 10 and up. To check which version go to the Help Menu in iTunes and click About iTunes. That'll tell you the version. If it's below 10 go back to the Help Menu and check for updates, install the latest version, which 10.2.2
    If it is iTunes 10 or later, uninstall and reinstall iTunes. Here's the article that walks you through it.
    http://support.apple.com/kb/HT1923?viewlocale=en_US

  • Ipod nano 7th gen not recognized by iTunes. Windows

    My ipod was working fine until a couple months ago. Now whenever I hook up the ipod to the computer I get an error message saying an ipod has been detected, but it could not be identified properly. I've tried restarting the computer, deinstalling & reinstalling new iTunes, but to no avail. Help!

    In same boat. Mine wont even charge. Now fully dead. I have a number of different USB sources. Ipod doesn't recognize it is plug in.
    Ever since I got ipod has been detected, but it could not be identified properly.
    But trying to solve my problem Found most people solved there issue with holding on/off and sleep buttons at same time for few seconds to reboot. Didn't work for me.
    Might for you.

  • Ipod nano 7th gen not recognized by itunes

    how is this fixed

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62 and Windows 8.1.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Nano 6th gen not recognized even after downloading itunes

    nano 6th gen not recognized even after downloading itunes

    Well I'm not at all technical so all I can tell you is the docking station is plugged into a wall socket - and the cable is the original one that came with the docking station, and my other iPod, which is about 5 years old charges fine on the unit, it's driving me bonkers!!!! Thanks

  • Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

    Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

    I found that all the movies that I want on my nano have iTunes extras.

Maybe you are looking for

  • Automatically generate accruals for Parked Invoices

    Dear SAP Gurus, I am currently in the process of trying to improve our month end accrual process. We currently have a standard process where we issue a PO, book in the delivery and then process the invoice. Occasionally we have instances where the in

  • Error while generating wsdd file

    Hi, When I tried to generate a wsdd file from a wsdl file i have encountered the follwoing errors. Please help me on this. I have typed the follwing command to generate a wsdd file: java org.apache.axis.wsdl.WSDL2Java -o . -d Session -s -S true tax.w

  • Mini failure help - beyond the flashing finder

    I have one of the original 1.25 Mac Mini G4's with 1.25 RAM running 10.4.10, all other software UTD & permissions repaired. Recently, perhaps following a thunderstorm (despite surge protector), upon returning from vacation, the flashing finder folder

  • WinRM query result locale

    I am testing the following scenario: WinRM client is running on a Windows Server 2008 with German locale Hyper-V (and WinRM service respectively) is running on Windows Server 2012 R2 with English as default locale and German locale installed in addit

  • SECATT to create a composite role

    hello, until now i was using secatt with succes to create composite roles. but i now have to create composite roles with a lot of included simples roles. and i have this problem : when i try to add more than 11 simples rôles to my composites roles, i