IPod nano 6th gen. shuffle problem

Hi Everyone,
I just bought a iPod nano 6th generation but I have a problem with the shuffle function. When I select a playlist and choose "shuffle" it shuffles ALL the songs i have on my iPod, not just the playlist I selected... I would like to shuffle just the songs in one playlist.
How to solve this?
Thanks!
Nanneke

you just have to enter the playlist. select a song, press on the center of the screen, change page(going on the right side) and then choose shuffle(pressing on the symbol!) that's the way for shuffling your playlist!

Similar Messages

IPOD nano 6th gen recovery problem?

I am trying to restore my ipod nano 6th gen to factory settings as I was having problems with it. I followed the promps and now it just sits there saying "Do Not Disconnect" with the flashing circle with a bar through it. Can anyone help?
Thank you very much.
Jeff

Try posting in the iPiod Nano forum. This is the iPod touch forum.

IPod Nano 6th Gen Touch Problems

So I have an iPod Nano 6th Gen, and my touch screen is acting weird. It will work and detect my touch, but it will randomly act as if I'm touching it when I'm not, for example I set it to time on wake, then when I wake it I see the clock for a second then it jumps to my home screen and starts "touching" icons. I did a test in the diag mode by holding all 3 buttons at once, and I get the results shown below, the Cal and SC and green and 0C is red, not sure what these mean but I'm guessing they are all supposed to say OK!. Any help would be appreciated.
Cal:OK!
0C:R2
SC:OK!

Have you tried restoring the device?
Diagnostic mode is only for the Apple Technicians. We have no way of using that information.

Ipod Nano 6th gen USB problem with JBL 1000 Radio

My Ipod nano 6th generation will nt sync to my JBL Radio sytem through the USB Port. I am trying to download music from my Ipod to the hard drive on my JBL Radio. I have done this before with a different name brand player through the USB Port.
The Nano USB port works on my Lexus Radio system but not my JBL Car Radio.
Is there a compatibility issue with the 6th generation nano USB port and the JBL USB Port? My JBL radio is a J-1000.
Thanks in advance.

Try posting in the iPiod Nano forum. This is the iPod touch forum.

Ipod Nano 6th Gen Podcast problem

Hi
I have a problem viewing podcasts on my iPod when it is plugged into my (Windows) PC.
I have uninstalled and re installed iTunes and I have reset my iPod, but everytime I try to view the list of podcasts (only to add new ones that I have subscribed to from iTunes) iTunes stops working.
Help?

Try posting in the iPiod Nano forum. This is the iPod touch forum.

Ipod nano 6th gen, wierd functionality problems

I got this ipod nano 6th gen refurbished from apple a year back. I just started using it and found that after I synced it with my itunes, i have the following problems :
1. The screen display is opposite than my previous ipod (landscape vs portrait).
2. I have to manually change to next song most of the time.
3. When I change songs, it plays a song a few seconds and then skips a few before stopping on a song.
4. The song playing is not the song displayed on the screen.
Tried restoring to factory settings. Same issues. Can someone help?

Hi zenpal1,
If you are having multiple issues with your iPod nano that persist after a factory restore, you may need to have your iPod evaluated or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

Question: Problem Syncing some songs in ipod nano 6th gen

Hi all,
So I've been having some problems syncing songs over to my new Ipod nano 6th gen. Whenever I try to sync, this message pops up:
This happened before with another song, and I just ignored it, and after checking my iPod, it had synced anyways. However, some songs do not seem to do this. I've tried changing the file format from mp3 to wav, finding other copies, deleting it from iTunes and then re-loading it. Nothing seems to work. The songs that won't sync work fine on iTunes, and I can play it from my computer, whether from iTunes or Windows Media Player, but it refuses to go on my ipod. >.< If anyone has encountered this problem and knows how to fix it, help would be appreciated. Thanks!

Did you actually add these songs to your iTunes library and move their physical location or is iTunes referencing them in another location? Sounds like the latter in which case they won't be synced to the Nano.

My ipod nano 6th gen can't be identified by any computer, but it can still be charged in a wall socket. what's the problem in here? :'(

There's this time that my ipod nano 6th gen stopped from being recognized on any computer, i tried all trouble shooting stuff but none of them worked, can you give me any solutions? i'm pretty desperate.

Are you using a Macintosh or Windows?
-Zeph

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
This is what happens:
When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
I have also restored the device in itunes, with no luck.....
Thanks in advance for any useful answer!

Thanks for your answer...
The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

IPod Nano 6th Gen - Functional but white screen on pressing wake/sleep button

Hi
I have an iPod Nano 6th Gen (out of warranty & applecare) - hasn't been dropped etc & never had any trouble.
This morning I got the white screen after unplugging it from charging.
I have tried hard reboot (power button + vol down). I have put it into disc mode (hard reboot + both volume buttons) and restored it to factory settings from itunes (10.6.3) . I've even put it into diagnostic mode and looked around to see if there were any tests I could do.
Functionally the ipod works ok - plays music, volume changes, and it will shuffle on shaking/ play pause on double pressing the power button.
The problem is when I switch off the screen by pressing the power button once - if I try to switch the screen on again I only get the white screen (although this doesn't affect music playing etc).
The way to get around this is either doing a hard reboot (which is a pain as it removes all my settings) or by switching off the ipod, waiting 5 minutes, then switching it on again (this preserves my settings). If I switch off the ipod and try to switch it back on within 5 mins, it's straight to the white screen.
The only other odd thing I noticed was that the screen was shaky/jolty and graphics not quite lining up etc, but this only lasted 10s and went once I started playing music...
Any ideas as to what is causing this? I'm guessing maybe a hardware problem but it seems strange that there is no white screen on switching on, just from waking.
It was a present from my dad and I'm very fond of it so would like to keep it/fix it if possible!
Thankyou!

Hello bfsf,
Welcome to the Apple Support Communities!
I understand that your iPod nano (6th generation) displays a white screen after waking from sleep. First let my say that you have completed some great isolation and troubleshooting steps on your own. Because the issue is still present after the fantastic troubleshooting you already completed, it may be necessary to have this iPod evaluated for service. If you would like more information on this process, please read over the information in the attached link.
Apple - Support - Service Answer Center
Cheers,
Joe

Ipod nano 6th gen touch screen stopped working please help

Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
I have given up with my Nano and am now using an old model

My ipod nano (6th gen) keeps connecting and disconnecting itself from my computer can anyone help?

I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
Thanks

I too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated.

I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

I have the same problem and can't seem to figure out what the problem is. I rebuilt my iTunes library and still my 6G nano crahes whenever I load an AAC tune onto it. MP3s and podcasts all work fine, it's just the AACs...
Just *loading* an AAC song will cause the Nano 6G to reboot as soon as it disconnects from Itunes. It will then reboot a few times and then go into recovery mode. :-(
Karen

I can't connect my iPod nano 6th gen to iTunes 11.1.

I can't connect my iPod nano 6th gen to iTunes 11.1. It keeps saying 'it could not be identified properly". I've tried all the steps on troubleshooting page but nothing's successful. Anybody got some help?

I found I had the same problem so I uninstalled iTunes, Apple Mobile Device Support, and Apple Application Support and then redownloaded the latest version of iTunes which reinstalled everything I uninstalled and I was able to sync my 1st Gen iPad and my 3rd Generation Nano with iTunes 11.1

IPod nano 6th gen. shuffle problem

Similar Messages

Maybe you are looking for