Ipod Nano 6th gen USB problem with JBL 1000 Radio

My Ipod nano 6th generation will nt sync to my JBL Radio sytem through the USB Port. I am trying to download music from my Ipod to the hard drive on my JBL Radio. I have done this before with a different name brand player through the USB Port.
The Nano USB port works on my Lexus Radio system but not my JBL Car Radio.
Is there a compatibility issue with the 6th generation nano USB port and the JBL USB Port? My JBL radio is a J-1000.
Thanks in advance.

Try posting in the iPiod Nano forum. This is the iPod touch forum.

Similar Messages

Ipod nano 6th gen damages headphones with an inline mic?

I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself. at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone. they worked perfectly on the iPhone for several weeks. I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc. When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged. That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
Has anyone experienced this problem before when using earbuds with an inline remote / mic? is it possible that the earbuds are not compatible with the iPod? i am worried that this is a hardware issue and cannot be fixed by software update....

Did you try doing a Reset on the iPod (which restarts the iPod)?
http://support.apple.com/kb/ht1320
If that does not help, you may want to also try doing a Restore of the iPod in iTunes.
http://support.apple.com/kb/ht1339

IPOD nano 6th gen recovery problem?

I am trying to restore my ipod nano 6th gen to factory settings as I was having problems with it. I followed the promps and now it just sits there saying "Do Not Disconnect" with the flashing circle with a bar through it. Can anyone help?
Thank you very much.
Jeff

Try posting in the iPiod Nano forum. This is the iPod touch forum.

IPod Nano 6th Gen Touch Problems

So I have an iPod Nano 6th Gen, and my touch screen is acting weird. It will work and detect my touch, but it will randomly act as if I'm touching it when I'm not, for example I set it to time on wake, then when I wake it I see the clock for a second then it jumps to my home screen and starts "touching" icons. I did a test in the diag mode by holding all 3 buttons at once, and I get the results shown below, the Cal and SC and green and 0C is red, not sure what these mean but I'm guessing they are all supposed to say OK!. Any help would be appreciated.
Cal:OK!
0C:R2
SC:OK!

Have you tried restoring the device?
Diagnostic mode is only for the Apple Technicians. We have no way of using that information.

IPod nano 6th gen. shuffle problem

Hi Everyone,
I just bought a iPod nano 6th generation but I have a problem with the shuffle function. When I select a playlist and choose "shuffle" it shuffles ALL the songs i have on my iPod, not just the playlist I selected... I would like to shuffle just the songs in one playlist.
How to solve this?
Thanks!
Nanneke

you just have to enter the playlist. select a song, press on the center of the screen, change page(going on the right side) and then choose shuffle(pressing on the symbol!) that's the way for shuffling your playlist!

Ipod nano 6th gen. not syncing with itunes match

After the new itunes 11 release I cannot sync my Ipod nano 6th generation with Itunes match without downloading all the songs I want to copy to my ipod to the computer first.
It is a little compersome to download 8Gb to my mac just for syncing and after sync delete them from my computer so that I just stream it again (airbook simply does not have enough space)

iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
You can send feedback on the upgrade here: http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

IPod Nano, 4th Gen. Problems with playback.

When watching a clip, the iPod Nano will suddenly start to fastforward halfway, or around 8 minutes into the clip. This doesn't happen to all my movies and clips, just the ones that are around 10-15mins long. The audio stays the same and does not fast forward, but the visuals begin to skip by the time the images end, the audio is still going. When playing the same clip back on iTunes, or other programs, the clip is perfectly fine. It only begins to fastforward when watching it on the iPod Nano.
This is very frustrating! Any help would be appreciated.
I have also tried restoring and restarting the iPod, but nothing works.

First, make sure you are running the latest versions of your OS. You should be running the latest service pack for whatever version of windows you are running. Here are the basic system requirements as stated in the Apple store:
Mac Requirements
USB 2.0 port
Mac OS X v10.4.11 or later
iTunes 8 or later
Internet connection (broadband recommended; fees may apply)
iTunes Store account
PC Requirements
USB 2.0 port
Windows Vista or Windows XP Home or Professional (Service Pack 3 or later)
iTunes 8 or later
Internet connection (broadband recommended; fees may apply)
iTunes Store account
Second, start the process with the iPod connected directly to the system, not through a USB hub. See if this changes things for you.
Also make sure you have gone through the basic troubleshooting as stated here:
http://www.apple.com/support/ipod/five_rs/nano/
If problems persist, it may be the installation of iTunes that is causing trouble. Uninstalling iTunes and re-installing could clear things up. Here is a link to instructions on removing iTunes:
http://support.apple.com/kb/HT1926
Of course, start with the easy things first and work from there. Hope this gets you running smoothly.
i

Ipod nano 6th gen, not synching with itunes

My ipod is not showing up in itunes - it shows up in 'my comp' but not in itunes. On my ipod screen it synchs for approx 5secs then stops and i get a box with 'an ipod has been detected but was not recognised' i have tried all the suggestions on the site but no joy. I live really far away from a store so travelling to a genius bar isn't really possible. Anyone have any suggstions? Also is it possible to restore the 6th gen - as i cannot synch to itunes?

anyone?

Ipod Nano 6th Gen Podcast problem

Hi
I have a problem viewing podcasts on my iPod when it is plugged into my (Windows) PC.
I have uninstalled and re installed iTunes and I have reset my iPod, but everytime I try to view the list of podcasts (only to add new ones that I have subscribed to from iTunes) iTunes stops working.
Help?

Try posting in the iPiod Nano forum. This is the iPod touch forum.

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
I want to offline update with iTune.Can I get firmware 1.2 update file.

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Ipod nano 6th gen, wierd functionality problems

I got this ipod nano 6th gen refurbished from apple a year back. I just started using it and found that after I synced it with my itunes, i have the following problems :
1. The screen display is opposite than my previous ipod (landscape vs portrait).
2. I have to manually change to next song most of the time.
3. When I change songs, it plays a song a few seconds and then skips a few before stopping on a song.
4. The song playing is not the song displayed on the screen.
Tried restoring to factory settings. Same issues. Can someone help?

Hi zenpal1,
If you are having multiple issues with your iPod nano that persist after a factory restore, you may need to have your iPod evaluated or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Regards,
- Brenden

IPod Nano 6th gen won't sync with iTunes 12.1.1.4

iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
Any suggestions would be appreciated.

What solved my problem:
I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
Additional details:
I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

Question: Problem Syncing some songs in ipod nano 6th gen

Hi all,
So I've been having some problems syncing songs over to my new Ipod nano 6th gen. Whenever I try to sync, this message pops up:
This happened before with another song, and I just ignored it, and after checking my iPod, it had synced anyways. However, some songs do not seem to do this. I've tried changing the file format from mp3 to wav, finding other copies, deleting it from iTunes and then re-loading it. Nothing seems to work. The songs that won't sync work fine on iTunes, and I can play it from my computer, whether from iTunes or Windows Media Player, but it refuses to go on my ipod. >.< If anyone has encountered this problem and knows how to fix it, help would be appreciated. Thanks!

Did you actually add these songs to your iTunes library and move their physical location or is iTunes referencing them in another location? Sounds like the latter in which case they won't be synced to the Nano.

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

Ipod Nano 6th gen USB problem with JBL 1000 Radio

Similar Messages

Maybe you are looking for