Ipod nano 6th Gen with engraving?

Is there any way i can still purchase an ipod nano 6th Gen with engraving?

Only if you find one in a store somewhere and then take it to an engraving firm.

Similar Messages

  • IPod Nano 6th Gen can't save my run

    anyone can help me with this?
    i'm using iPod Nano 6th Gen with nike plus. everytime i hit end workout my ipod is rebooting itself and can't save my run however when i jack my ipod to my treadmill that problem doesn't occur. i try to ask for help to the nearest ibox in town but unfortunately they're not helping AT ALL!!! fyi the software is updated from time to time and currently using version 1.2PC and i have 13.3GB available
    so anyone has experienced this kinda problem please let me know how to fix this. thank you

    after i tapped on the end workout, it showed the apple logo. I waited for about 15-20 secs and it went back to the main screen with the icons
    then i checked my history go to workout totals and it showed the apple logo (again) and went back to the main screen (it means it's not recorded right?)
    thanks for helping

  • My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    Read the PDF user manual for a possible solution:  iPod Manuals and/or iPod Nano Support 
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. 
    If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • Does the Ipod nano 6th gen capable of sending signal to headphones. Us older folks would like to use wireless headphones versus earphones with a wire.

    Is the  ipod nano 6th gen capable of sending signal to wireless headphones. I am 57 and do not like earphones and wire. Would like to get the nano. I understand the iphone 4 can use wireless headphones, but i can not wear it on my wrist like a watch. Thank you. techie mawmaw.

    What is your price range. I know exactly what you are talking about. I always used headphones while mowing and I used to runt he cord through my shirt to prevent it from getting caught on the steering controls of the mower but one day the cord came untucked form my pants pocket ripping the cord straight out of the headphone itself. They were nice Sennheisers to!
    I ended up replacing them with these http://en-us.sennheiser.com/wireless-bluetooth-hea​dset-headphone-smart-mobile-phone-stereo-mm-500-x they are pricey at 330 but will last you many years if they are taken care of. Sennheisers are excellent quality. Best Buy oddly doesnt carry the 500 series they have the 450 and 550 but not the 500. Completely ignore the Beats by Dr. Dre they are horrible for the price point they are!
    The noise cancellation is great and they are very comfortable. Like you I dont care for earbuds as I have tried many and they all hurt my ears and on-ear style would eventually start hurting my outer ear but these are very comfy!

  • Receive error message, The iPod cannot be synced.  The required disk cannot be found.  iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

    Receive error message, "The iPod cannot be synced.  The required disk cannot be found.  This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7.  This is getting frustrating.  I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once.  I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod.  I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad.  This is the only device that has this issue.

    I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
    Re: 30gb 5th gen. Probs syncing.
    Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
    Try running a disk check out the iPod using the tools provided by windows.
    To do this:
    1. Plug in your iPod and close iTunes.
    2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
    3. Go to the Tools tab. Under "Error Checking", click Check Now.
    4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
    The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
    B-rock

  • I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

    I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
    Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
    I want to offline update with iTune.Can I get firmware 1.2 update file.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • Ipod nano 6th gen damages headphones with an inline mic?

    I have been using skullcandy earbuds with inline mic/ remote with an iPod nano 6th gen. The problem is that songs will skip automatically, voice over comes on inadvertantly, and volume will go up and down by itself.  at first i assumed it was the headphones since it seemed that a button on the inline remote was sticking and causing all of these inadvertant problems. but, i got brand new set of earbuds, different cheaper brand with inline remote (iLuv), and first tested them on my iPhone.  they worked perfectly on the iPhone for several weeks.  I then started using them on my iPod nano, and a few days later noticed the same thing as before - inadvertant skipping, voice over, etc.  When i tried to use the same earbuds again, but on my iPhone, the problem persisted indicating that the headphones were now damaged.  That is when i realized it must be the iPod somehow short circuiting the earbuds, since it happened on two separate sets of earbuds.
    Has anyone experienced this problem before when using earbuds with an inline remote / mic?  is it possible that the earbuds are not compatible with the iPod?  i am worried that this is a hardware issue and cannot be fixed by software update....

    Did you try doing a Reset on the iPod (which restarts the iPod)?
    http://support.apple.com/kb/ht1320
    If that does not help, you may want to also try doing a Restore of the iPod in iTunes. 
    http://support.apple.com/kb/ht1339

  • I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?

    Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
    Try posting this one in the iTunes forum, they might have a solution for you.
    i

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • IPod Nano 6th gen won't sync with iTunes 12.1.1.4

    iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
    This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
    Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
    Any suggestions would be appreciated.

    What solved my problem:
    I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
    Additional details:
    I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

  • Ipod nano 6th gen. not syncing with itunes match

    After the new itunes 11 release I cannot sync my Ipod nano 6th generation with Itunes match without downloading all the songs I want to copy to my ipod to the computer first.
    It is a little compersome to download 8Gb to my mac just for syncing and after sync delete them from my computer so that I just stream it again (airbook simply does not have enough space)

    iTunes 11 won't even recognize my 1st and 3rd gen nanos. They've just rendered all the devices I love useless.
    You can send feedback on the upgrade here:  http://www.apple.com/feedback/itunesapp.html. I'm hoping enough legacy iPod users will speak up that they'll rethink and/or fix it.

  • My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

  • Is it possible to get intermediate info while running with the Ipod Nano 6th gen?

    In the store I was told that the Ipod Nano 6th gen would keep me informed every 500m or every km about my distance, average speed etc.
    The Ipod only tells me AFTER the run what my average speed etc was. Not during my run. Is there a possibility to get this info during my run? The store does not know the answer.

    Do you have the Spoken Feedback setting set to On under Settings -> Fitness on the iPod?
    B-rock

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • My ipod nano (6th gen) keeps connecting and disconnecting itself from my computer can anyone help?

    I have read numerous posts online about the same problem but can't seem to sort mine out. I've tried changing power leads, restoring back till an older version of itunes, resetting the ipod, restarting my computer and tried every USB port in sight but still nothing.
    I have plugged a friends ipod touch into my computer and it connects and appears in itunes fine, but with mine it wont stay connected long enough for me to try and restore anything with it on itunes its literally a 1 second interval between connected and ejecting. I thought maybe it could be the connection terminal on the ipod but i have had it connected to a wall charger and xbox with it staying connected with no problems.
    I am running windows vista on the computer and the nano was previously synced to a different itunes could this be the problem and if so how do I go about fixing it??
    Thanks

    I too am having this same issue. I connect my iPod nano (6th gen), and it appears for anywhere between 1 to 10 seconds and then automatically ejects.
    I'm running a macbook pro with OS X 10.6.8 and the most up to date version of iTunes. The strange thing is that the nano works fine on my old macbook from 2007; which also has the most up to date iTunes but is running OS X 10.5. Another thing is that my iPod touch works just perfectly on my MacBook Pro.
    I have read up on a lot of forums, and have found little help for those who are running into this problem on a Mac. The majority of fixes are for PC. Any help would be greatly appreciated.

Maybe you are looking for

  • Converting word to pdf with acrobat 9/distiller can not retain hyperlinks to web docs

    Have tried going to settings in Acrobat only  see option to retain book marks .  Online help indicates there is setting for RTF which would retain hyperlinks.  This is supposed to be in the settings extras folders but is not.  I am running Office 200

  • How to get the value incremented only when the loop is true?

    Hi,    From the snapshot attached, i want to increment the value of number indicator only once when its true and should increment the value again when the loop is true..i mean i want to get the number of times the loop is true. But in this vi i am ge

  • How to Debug Runtime Errors in WS

    Hello, I've cretaed a WS in JDev 10.1.3.1 and successfuly deployed it in SOA Suite 10.1.3.1. While testing the service I'm getting NullPointerException. I want to debug the problem and tried putting Sytem.outs in my underline java beans but I'm unabl

  • Simias-server-setup error: Unable to set simias path

    No matter what configurations I put in, when running through "simias-server-setup" I keep failing at this error: System.Exception: Unable to set simias data path in /root/ifolder_server at Novell.iFolder.SimiasServerSetup.SetupScriptFiles () [0x00000

  • Which iView should be used for displaying XML forms?

    Hi All,   I have created 3 xml forms.    1.Edit form    2.RenderList form    3.Show form So How do I embedd them into iViews? Thanks in advance, Jasmine.