Ipod-nano-6th generation- booting trouble :(

using ipod nano - 6th generation
the problem is , when i switch on the ipod it show a message that "use itunes to restore" and gets rebooted automatically.
tried and got tierd of following all the possible ways found in apple support and in youtube , nothing helped out.
need someone to help me !.. in confusion !..

iPod nano (6th generation) - User Guide

Similar Messages

  • TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

    My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

    I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
    Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

  • The battery life on my ipod nano 6th generation only lasts about 2 hours.  Is this standard or should it last longer?

    The batterly life on my ipod nano 6th generation only lasts about 2 hours.  Is this standard or should it last longer?

    - When sleeping the iPod can use wifi and if it has trouble connecting it will keep trying and drain the battery.  I leave mine in airplane mode when sleeping. Otherwise it is frequenlty drained like you see on yours.
    - The rapid drop whe playing vido seems to indicae that something is wrong.
    - If your iPod is defective and under warranty, Apple will give you a refurbished one of the same model.

  • HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • How do I play all tracks on an album sequentially on iPod nano 6th generation ?

    I have an ipod nano 6th generation. I want to play all tracks on an album sequentially (as if I was playing a CD) without having to select each one in turn. On my ipod nano it repeats the same song and wont move to the next one automatically. can anyone help ?

    The repeat setting can be found from the Nano's Now Playing screen.  While playing a track, swipe to the right to bring up additional controls including the scrubber bar, as well as the repeat and shuffle otpions. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

  • I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

    I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

    You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
    B-rock

  • The volume increase button is stuck on my iPod nano (6th Generation) and I can't turn the volume up. Is there a way to fix it?

    I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
    Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.

    This happened to me a few weeks ago.  Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button.  I waited a half hour and then cleaned of the excess WD 40.  This unstuck my power button.  I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button.  A friend tried isopropyl alcohol w/ great results.  Try this before you give Appple any more $$ or get a new ipod.  It's been 6 wks. and my button functions perfectly,

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Adding photos from iphoto to ipod nano 6th generation

    I want to take photos from iphoto (mac os x 10.6.8) and put them on my ipod nano 6th generation.  I can't find anything on itunes that mentions photos and my ipod doesn't show up in iphoto or applications.

    Thanks. I followed through with those instructions. Now when I go to sync, I don't want everybody else's music to show up on my ipod.  How do I sync? And if I check sync only checked songs, will it sync ALL checked songs? We have alot of songs, but I don't want all of them.  How can I manually sync?
    Thanks!

  • ITunes and my Mac don't recognize my iPod Nano (6th generation) under devices?

    iTunes and my Mac don't recognize my iPod Nano (6th generation) under devices? I have tried rebooting/resetting and reinstalling iTunes already. I have also checked the ports and cables, what can be done?

    Try here.
    iOS: Device not recognized in iTunes for Windows
    Could be your security software and firewall preventing iTunes from recognizing your iPod.
    Disable antivirus software
    Turn Windows Firewall on or off

  • IPod Nano 6th Generation Not Charging/Holding Charge

    Hi.
    My iPod Nano 6th generation will not charge or hold a charge. I plug it in and it will turn on for about 30 seconds or less and then die. It will then continue to turn on and die unless I unplug it in which case it will die and not turn on. Any advice/suggestions and/or help finding what is wrong would be greatly appreciated. Thank you in advance.

    hold down the enter button for 5 secs then plug into wall while still holding it down.

  • When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

    when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

    Hello beafraser,
    Here's an article to help troubleshoot when your iPod is detected but not identified.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Hope that helps.
    Thank you for visiting Apple Support Communities.
    Nubz

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

Maybe you are looking for

  • SetSelectedValue for multiple values in List Box

    Hi, I want to set the selectedValue for multiple values in the List Box. If i use setSelectedValue for all the values, it just highlights the last one. Can anyone tell me how do i highlight multiple values in the List Box? Scenario: I have one screen

  • JBO-33035: Row currency has changed since the user interface was rendered

    First - Yes I have read a number of the postings regarding this error - HOWEVER - there seems to be a 'rather' serious side effect that I need to get fixed. Am dropping on a a UIX datapage a datacontrol VO component as a Search Form. I have added Del

  • Change Encoding from PCM to GSM

    i want to send sound over the network. i have already an application, which captures sound from a microphone, sends raw sound data(byte array) over the network and plays this sound on an other computer. how can i change the encoding? from pcm to gsm.

  • Clientgen ant task throwing errors in Weblogic 8.1 SP4

    When I try to run clientgen ant task for a WSDL (pertaining to a .NET webservice on a non-weblogic server) in Weblogic 8.1 SP4, I'm getting the following errors. I'm running setEnv command, clientgen ant task from command prompt in WLS_HOME/user_proj

  • Need FM for displaying date as output  EX:april 07

    Hi All, I have a problem in displaying date for example: If i give period as 3 and year as 2007, the output should be displayed as april-07. Can any one help me out in finding a solution. Thanks in advance.