Ipod nano 6th generation isn't recognized by computer or iTunes

computer doesn't recognize ipod nano 6th generation

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Similar Messages

My ipod nano 6th generation isn't recognized

My Nano 6th generation will turn on fine, and will play music when the ear buds are plugged it. It also will charge when connected to either my computer, my car dock or an ihome dock. However, it will not be recognized by any of those medias when plugged it. I-tunes will not sync or recognize my ipod when puggled in, when it is plugged into my car port it says "no line in" and when in the i-home it just won't play.
I have tried reseting it with no lock, have tried to it in disk mode, but have been unsuccessful.
The support person I spoke suggested that I restore the ipod software thru itunes, but I can't even try that because my itunes/computer isn't detected my ipod when it is plugged in.
I have also tried "shoving it in real good" as the support tech suggested. No luck.
Any ideas?

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Ipod nano 6th generation is not recognized by iTunes. How do I fix this??

I bought an Ipod nano 6th Gen. yesterday and I am not able to connect to iTunes. It is not recognized.

What version of iTunes are you running?
Allan

Video Ipod 80G 5th generation not being recognized by computer or itunes.

My ipod is not being recognized by my computer or itunes at all. I bought a new cable and nothing happens as well. however when i connect it in my car it works fine. did any resolve this issue? I am not sure if its the new software that has the issue but i am almost certain it is.

Many people are reporting problems with connecting there fifth-gen iPods after the update to iTunes 9. I had the same problem, and when I downgraded to iTunes 8, everything worked again.
I tried cables, resetting, and all the other steps. My solution turned out to be iTunes 9 itself.
My problem came from using a replacement hard drive-an adapter that allows me to retrofit my iPod with a Compact Flash card instead of a hard drive.
The problem is NOT the adapter. This system functioned perfectly until iTunes 9, and when I switched back to iTunes 8, it worked again.
Summary: I have a modded iPod, and it consistently works with iTunes 8, but not iTunes 9.
Reason: Apple is sooooooooooo afraid a Palm Pre user will be able to use iTunes that they are breaking the sync code on purpose.
Downgrading iTunes:
1. find the download of iTunes 8 for your OS. (not posting links, as they may change)
2. go into your iTunes 9, and export EVERY playlist to a text file. This is the only way to preserve your playlists.
3. Uninstall iTunes 9 from you computer, install iTunes 8.
4. Configure iTunes 8 to use your music folder (especially if you moved your music to a different location other than the default)
5. Add your music to iTunes-this may take awhile.
6. Import you text files and your playlists will return.
7. Backup your iTunes 8 library files.
Happily enjoy your modded iPod. Mac Users: Don't accidentally install iTunes 9 from an Apple Update.

HT1363 iPod nano 5th generation is not recognized by computer

I've uninstalled and installed iTunes, gone through the 5Rs, attempted all the USB ports, restarted the computer, attempted putting the iPod in Disk Mode, and I'm now going to put my iPod on YouTube with a shameful sign on it to punish it until it connects to my computer and uploads my new music! Can someone help me make these two devices communicate. BTW, the cable is functional, too. Thanks.

iPod appears in Windows but not in iTunes

Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

I found that all the movies that I want on my nano have iTunes extras.

My iPod Mini 3rd Generation isn't recognized in My Computer or iTunes. I can't even restore it without iTunes. The same thing happened with my iPod Nano 3rd Generation, but that one worked for a while, and suddenly went unrecognized.

My iPod Mini 3rd Generation isn't recognized in My Computer or iTunes. I can't even restore it without iTunes. The same thing happened with my iPod Nano 3rd Generation, but that one worked for a while, and suddenly went unrecognized.

Hi TherAscendedSaiyan,
Welcome to Apple Support Communities.
See this troubleshooting article that addresses the symptom you're encountering:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Best,
Jeremy

The volume increase button is stuck on my iPod nano (6th Generation) and I can't turn the volume up. Is there a way to fix it?

I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.

This happened to me a few weeks ago. Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button. I waited a half hour and then cleaned of the excess WD 40. This unstuck my power button. I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button. A friend tried isopropyl alcohol w/ great results. Try this before you give Appple any more $$ or get a new ipod. It's been 6 wks. and my button functions perfectly,

ITunes and my Mac don't recognize my iPod Nano (6th generation) under devices?

iTunes and my Mac don't recognize my iPod Nano (6th generation) under devices? I have tried rebooting/resetting and reinstalling iTunes already. I have also checked the ports and cables, what can be done?

Try here.
iOS: Device not recognized in iTunes for Windows
Could be your security software and firewall preventing iTunes from recognizing your iPod.
Disable antivirus software
Turn Windows Firewall on or off

Ipod nano 6th generation apple logo flashing

I have an ipod nano 6th generation that when connected to the computer USB it flashes the apple logo. When not connected, it does not turn on at all. I have tried all the reset tricks with no impact. Also, my iTunes does not even recognise it as being connected to the computer. Any ideas I haven't explored yet?

Hi magostin,
Welcome to the Apple Support Communities!
In situations where your iPod nano is not recognized in iTunes, I would suggest the troubleshooting steps in the attached article. Please use the troubleshooting for Windows or Mac in the article depending on what type of computer you are connecting to.
iPod not appearing in iTunes - Apple Support
Cheers,
Joe

Issue with Ipod Nano 6th Generation

Hi,
I am currently living in Japan and managed to get an iPod nano 6th generation at the Apple Store in Shibuya. However, there are a few things that I am curious as to whether or not other users are experiencing. First, my songs are set to shuffle, and sometimes when I hit next song it will shuffle through 3 or 4 (my shake to shuffle feature is OFF). Once it gets to the song, it might show one songs cover but play a different song. Also, if a song is playing and I blank out the screen, the next song will sometimes play, but sometimes it won't at all. When I wake up the screen it appears as if the next song should be playing but it isn't. So far, this has been a little disappointing. Does this sound like a problem with the software and are others experiencing anything like this? Thanks in advance!

What you are describing sounds like tracks that have been put on your nano that are not authorized to play them.
First, go to itunes and sort your music by "Kind" if this column is not showing, right click and select the kind column to show up. Sort by this column and scroll down, you will most likely see some music where the kind is "Protected AAC" or something like that. If you look on your nano, you will see that the tracks that are not playing are the ones where their kind is "Protected AAC".
If this all ends up being right, you need to reauthorize your computer to play your music. Connect your ipod, then in itunes select 'Store>Deauthorize this computer'. Then, select 'Store>Authorize this computer'. Then restore your ipod and resync all your tracks. Once you are done, they should be authorized and you should be able to play them on your ipod.
i

I have Ipod Nano 6th generation. My computer recognizes device but Itunes doesn't. Any suggestions?

I have Ipod Nano 6th generation. My computer recognizes device but Itunes doesn't. Any suggestions?

You might have better luck posting in the iPod Nano forum. You posted in the iPod Touch forum. For an iPod Touch one would start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Since I updated to itunes 11, my ipod nano 6th generation won't update?

Since I updated to itunes 11, my ipod nano 6th generation won't update?
I wanted to add in my Christmas playlists and most recent purchases, when it wouldn't get past syncing the second song a couple of times, I tried restore and lost everything because it still wouldn't sync. Then I tried to sync to my old computer which isn't itunes 11, and doesn't have my latest songs on it. My ipod did sync then though, so it seems to be a conflict between my version of ipod nano and the latest version of iTunes??????
Has anyone had the same problem? is there a solution??

Hey eamonn27
Thank you for using the Apple Support Community. Due to the nature of your issue, you may find more information by using another one of Apple's support resources.
Express Lane
https://expresslane.apple.com/GetproductgroupList.action
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My ipod nano 6th generation is not working anymore :( HELP

I have an ipod nano 6th generation. Was working perfectly. One day I wake up and is showing me a screen I have never seen before..It reads:N20 Snowfox 4A0432
When I plug it, itunes doesnt recognize it. It recognized it once but it says problem 1621 and I follow the instructions but still my ipod is frozen and not even my computer can read it.
I really miss my music for my morning run!

Have a look at comment # 4 and 5 on this page iPod nano 6G diagnostic mode to get it out of this mode again.
Pressing the volume minus button and power button should help.

Ipod nano 6th generation isn't recognized by computer or iTunes

Similar Messages

Maybe you are looking for