IPod nano 6th generation photos
I loaded my ipod nano 6th generation with my photos....but they look like negatives, what happened?
I just found a comment, so I will try it....but will leave this up until I try it.
Similar Messages
-
Adding photos from iphoto to ipod nano 6th generation
I want to take photos from iphoto (mac os x 10.6.8) and put them on my ipod nano 6th generation. I can't find anything on itunes that mentions photos and my ipod doesn't show up in iphoto or applications.
Thanks. I followed through with those instructions. Now when I go to sync, I don't want everybody else's music to show up on my ipod. How do I sync? And if I check sync only checked songs, will it sync ALL checked songs? We have alot of songs, but I don't want all of them. How can I manually sync?
Thanks! -
Ipod nano 6th generation tvout
Hi : What kind of tvout cable do I need to connect my iPod nano 6th generation to a Sony bravia 32 inches tv ?
Thanks in advanceThanks.
Ok, getting into the details :
- I would like to see photos slideshows on a tv
- The ipod nano 6th gen I own has the following feature : Settings -> Photos -> TV signal -> NTSC or PAL, which means that it could be possible to watch photos slideshows on a tv. I tried with a cheap av cable, chose NTSC, activated a picture slideshow on the nano and did not work.
Thanks in advance, -
I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?
Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
How do I play all tracks on an album sequentially on iPod nano 6th generation ?
I have an ipod nano 6th generation. I want to play all tracks on an album sequentially (as if I was playing a CD) without having to select each one in turn. On my ipod nano it repeats the same song and wont move to the next one automatically. can anyone help ?
The repeat setting can be found from the Nano's Now Playing screen. While playing a track, swipe to the right to bring up additional controls including the scrubber bar, as well as the repeat and shuffle otpions. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock -
I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????
You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
B-rock -
I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.This happened to me a few weeks ago. Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button. I waited a half hour and then cleaned of the excess WD 40. This unstuck my power button. I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button. A friend tried isopropyl alcohol w/ great results. Try this before you give Appple any more $$ or get a new ipod. It's been 6 wks. and my button functions perfectly,
-
iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?
Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock -
ITunes and my Mac don't recognize my iPod Nano (6th generation) under devices?
iTunes and my Mac don't recognize my iPod Nano (6th generation) under devices? I have tried rebooting/resetting and reinstalling iTunes already. I have also checked the ports and cables, what can be done?
Try here.
iOS: Device not recognized in iTunes for Windows
Could be your security software and firewall preventing iTunes from recognizing your iPod.
Disable antivirus software
Turn Windows Firewall on or off -
IPod Nano 6th Generation Not Charging/Holding Charge
Hi.
My iPod Nano 6th generation will not charge or hold a charge. I plug it in and it will turn on for about 30 seconds or less and then die. It will then continue to turn on and die unless I unplug it in which case it will die and not turn on. Any advice/suggestions and/or help finding what is wrong would be greatly appreciated. Thank you in advance.hold down the enter button for 5 secs then plug into wall while still holding it down.
-
when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..
Hello beafraser,
Here's an article to help troubleshoot when your iPod is detected but not identified.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Hope that helps.
Thank you for visiting Apple Support Communities.
Nubz -
i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>Call Apple Care as you are still under warranty.
-
hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes
Hi meganisawsome,
If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
Apple Support: Charging your iPod battery
http://support.apple.com/kb/HT1384
If you are still having issues after charging, you may want to look at this article:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Regards,
- Brenden -
My ipod nano 6th generation will not turn on.
My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?
Hey s.mccarter2010,
Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPod won't turn on
If you have tried the solutions above and iPod still won't turn on, check the following:
Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
IPod nano 6th generation no longer synching runs to Nike+
Just got a pop-up when I connected my iPod nano (6th generation) that stated something that workout data would no longer be sent to Nike+ because iTunes no longer supports pedometer devices. I can't seem to find any details about why I can no longer synch workouts, from either Apple or Nike.
Anyone know what's going on with this?I found this info on another thread and it worked for me.
freebaharJul 18, 2014 11:01 AM Re: Sync 7 Generation iPod Nano with nike+
Re: Sync 7 Generation iPod Nano with nike+in response to mccone
I had the same problem.
Here is what i did and i manage to fix it.
Un tick the option connect automatically to nikeplus.com from your itunes
Click Apply or sync on the down left corner.
Then click connect automatically to nikeplus.com and
Click Apply or sync on the down left corner
I hope it will work for you as well.
Maybe you are looking for
-
Retrieving Dunning Clerk's name from Customer master data
Hi all, I have to retrieve the dunning clerk's name in report ZRSD0001 (Customer Master Data Report). There are standard methods to call the subroutine to retrieve the texts for some field like the bank statement text: PERFORM TEXTFIELD_CALL(RSAQEXCE
-
Update S066 and S067 tables after changing the credit horizon
Hi, I have changed the credit horizon which was previously month to day through OMO1. However after making this change, all the contents of credit management in the table S066 and S067 were deleted. Is there a way to update the the tables after this
-
How do I mode folders to a new location. I'm using Photoshop Elements 13 on iMac.
How do I mode folders, containing the photo files, to a new location, in my case a NAS?
-
How does oracle write to datafiles in a tablespace?
hi all Suppose I have a tablespace consisting of two datafiles. When I need to wirte data onto it,how does ORACLE write ? Does it initially write to the first datafile and then write to the second datafile when the first datafile getting full or writ
-
Sapscript output to pdf of standard program .
Hi , Any ideas on how we can save the output of a standard sap script eg purchase order QM notifications etc onto local disc as pdf file .As it is standard we cannot change the open_form structure ..