Ipod nano 7th gen bluetooth bug?

It cannot discover or pair to any other devices, though other devices will discover the nano (but not pair).
Tried 4 different nano's and none work. Even the Apple store genius bar couldn't find a nano 7th gen that
works, and there were plenty of bluetooth enabled devices in there. The ipod touch worked just fine.

I am just puzzled with Apple Store, that if, they did tried to pair an iPod nano with other bluetooth devices that they sell in the shop and they were not able to succesfully pair these devices. More so trying to pair other nanos with the same result. I also have the 7th gen nano and it is pairing perfectly to my Jambox speaker. It is even pairing with my Samsung Galaxy S2 (just pairing though, with no functionality). Because as long as the ipod nano is ON, within the range, and compatible (which most bluetooth devices are), I do not see why the ipod nano or nanos will not be able to pair with any bluetooth device/s in the Apple Store. Sorry I cannot help you with this one.

Similar Messages

I recently purchased a bluetooth headphone set that I have been able to pair to my iphone6 , but it is not showing up on my ipod nano 7th gen, anyone else had a similar problem ?

anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts

THanks for the suggestion deggie , but I have already tried this without any success. I just mentioned pairing it to prove that the headphones weren't defective. I also tried reaeting the ipod through itunes hoping that might help , but still no detection on the ipod

Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

There is currently no such antenna available.
B-rock

Music keeps cutting out on my ipod nano 7th gen when using bluetooth

I just recently got an Ipod Nano 7th Gen and the music keeps cutting out when I use bluetooth headphones. It seems like it needs to have a line of sight or else the music will cut out. If I hold the ipod in my hands while running or keep it in my pocket, I am listening to more pauses than actual music. I practically have to hold the Ipod up to my head while running to not have it cut out on me (and that is obviously not comfortable). Is this how it should be or do I have a faulty Ipod? Is there some way that I can fix it or do I need to take it to the Apple store?

thankfully I was just able to find the answer in another member's post. You can double click the side button to advance the songs. I credit member little goomba for sharing the answer on another post. Now I am back to loving my new Nano!

IPod nano 7th Gen. occasionally reboots

I've bought myself an iPod nano 7th Gen. about two weeks ago. I updated the firmware to 1.0.2 and synched some playlists on it. During the first two days my iPod nano shut down and rebooted itself about 10 times, no exaggeration. I went to my Apple Premium Reseller, turned it in and got a new one a few days later. I'm using that one for about a week now and I still got the same problems:
It happens when I wake the display up and music is playing. I hit the lock button, the music stops, the screen turns on and shows the Apple logo and then a few moments later the greyed-out homescreen with a spinner. Sometimes it shows the home screen directly and a spinner when I tap on the Music "app".
In some occasions I first hit the home button, the music kept playing and the screen stayed off, then I hit the lock button and my iPod reacted as described above.
Since two days, I observe another error which occurs often when editing a playlist or creating a new one, but also on wake up like above: The music stops, for about half a second a weird sound plays over the earbuds and then the iPod shuts down and I have to manually turn it on again (tap and hold on lock button).
I'm writing this now because I listened to music the whole day today and nearly everytime I took the iPod out of my pocket it rebooted like described above. I suspect that this is a software problem, so please, Apple, do something! These bugs make it really annoying for me to use my nano for what an iPod is for: listening to music.
Some further information: In iTunes, I checked the "Convert higher bitrate songs to 128 kbps AAC" option and filled the iPod nano with about 12 GB of music. I listen to music only with the Apple earbuds, no bluetooth headsets or car dock stations. For selecting songs, I mainly use playlists.

Okay, I tried unchecking "Convert higher bitrate songs to 128 kbps AAC" and this seems to solve the problem. Of course this is not satisfying because I can't fit all of my music on it anymore; but at least I can listen to it.
I still hope that someone at Apple reads this and tells me how to really fix that. For me, this experience is like buying a car that breaks down every 500 meters. An iPod nano that can't play back music without interruption is embarrassing!

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

How can i connect my ipod nano 7th gen to my car?

Hi, how can I connect my ipod nano 7th gen to my car with bluetooth? Since I only have onstar device on my car but no bluetooth device, do I need to buy extra device to connect my ipod ? And what kind of device I shall choose? Thank you!

Check with the manufacturer of your radio and see if they have a compatible cable.

Ipod nano 7th GEN no audio out from head phones jack

I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
Thank you!

Can you provide a link to the monster product, or the model name/number? If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

Ipod nano 7th gen problems synching

hello,
for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the exact syntax of the error but it had something to do with the ipod not being recognized and required a restore to factory.
I have corrected the first issue where the ipod was not recognized and had to be factory restored. Each time I restored, it would not be recognized by itunes.
I installed itunes on another pc and the same ipod synched and reconnected just fine, pointing back to the itunes install on my primary machine.
I resolved the first issue on my primary machine by following ht1923.
However, now the problem I see is that even though the ipod connects successfully , to my primary machine , when I synch and add music, no music shows up on the ipod even though itunes says synch successful. The ipod says "no music".
ipod serial number: C8NJRFX4F0GV
my primary pc is an HP Elitebook, running windows 7 professional 64 bit version
All itunes software completed removed and reinstalled clean.
Thank you

I would like to chime in that I've confirmed this as a reproducible bug on my iPod Nano 7th generation. I have an iTunes library with an offending compilation, and to avoid any possible tagging incompatability, I've converted the files to AAC with clean tags containing the album, artist, title, and track number. The album artist is "Various Artists" and I've checked off the "Part of a compilation" box for each track in my library.
These tracks all show their correct artists when I sync this library to my iPhone. However, when I sync the exact same tracks to my iPod Nano 7th Gen, it choose a random artist from amongst all the artists within the compilation and shows that artist name on *every* track.
iPod Nano 7th Gen has a bug in the firmware for displaying artists correctly when they are part of a compilation. The OP is likely doing nothing wrong. Apple needs to issue new firmware. Alternatively, I cannot think of any decent workaround short of splitting off each track of the compilation into a separate album, which, would be a huge pain and likely impractical for most people.

Which one should I get?iPod nano 6th gen 8 GB or 16 GB?or iPod nano 7th gen?

I want to get an iPod nano and which one should I get?iPod nano 6th gen 8 GB or 16 GB?or iPod nano 7th gen?

If you also want to use it as a watch and like the clip get the 6th Generation.
If you want to have a bigger screen, watch videos, and use Bluetooth without a dongle get the 7th Generation.

IPod Nano 7th Gen won't connect with phone

I am trying to connect my Droid Razor HD with my iPod Nano 7th Gen using Bluetooth. My phone recognizes the connection, my iPod doesn't. States:
Mobile phone
Not Connected
What's going on?

The iPod Nano only has A2DP (stereo bluetooth) AVRCP (controls) and low power Bluetooth profiles. It does not have File Transfer Protocol (FTP) and cannot connect to your phone.

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

Ipod nano 7th gen not turning on or connecting to laptop??

My son's ipod nano 7th gen won't turn on and when I connect it to the lap top a message comes up saying device driver not recognised - he was listening to it just last night, can anyone help? He's only had it since his birthday in November.

I reset the ipod by holding down the power button and the menu button and the apple screen came up after a few moments - this seems to have done the trick!

IPod nano 7th gen (brand new) doesn't recognize Headphones

I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
This is what happens:
When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
I have also restored the device in iTunes, and updated with no luck.....
Thanks in advance for any useful answer!
iPod nano

First, make sure the headphones plug is completely inserted into the nano's headphones jack. It should "click" into place. The fit may be tighter than expected, especially when new. There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
If that is not the problem, you should have the nano looked at under warranty. It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

Ipod nano 7th gen not being recognized by itunes

i have the new hp split x2 laptop running windows 8. i kept ignoring the new itunes update and everything was fine but as soon as i installed it, itunes no longer recognized my ipod nano (7th gen). i have been sitting here for about 2 hours looking for answers so now i am asking for them instead. is there a way to uninstall the last update? i would go to best buy and just have geek squad fix it for free (because im covered for 2 years) but we are currently having a massive snow storm here in NY please help!

I'm trying to put songs on it

Ipod nano 7th gen bluetooth bug?

Similar Messages

Maybe you are looking for