IPod Nano 7th Gen Charging Issues

Over the past two days my nano charges to around 90-95% and then refuses to charge any further, also tried to connect to various usb chargers and computer usb ports. If anyone knows a solution to this its would greatly appreciated.

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

Similar Messages

IPOD NANO 7TH GEN AUDIO ISSUE

Hi ,
I bought a Ipod Nano 7th Gen sep last year . For last few days audio quality has been reduced a bit i.e Clarity is missing , Bits are not so powerful .
Kindly help what to do .
I already reset the same twice but not getting any result .
Thanks
GS
9051185601

@ Watanabe Thanks boss , but I checked the same with out any result and pls note I use "ROCK" in the "EQ" setting .
Hope there s not any issues with hardware .
Could you please advice some better headphone for my Nano .
Thanks for your support .
GS

Ipod nano 7th gen sync issue

I have just bought a new ipod nano 7th gen and am having issues with syncing it to my PC. On my devices the ipod is there and recognised as such, but in iTunes the ipod doesn't exist at all. I have the latest version of iTunes but can't find a way to access the iPod at all - any ideas?
The iPod is recognised on the family laptop (macbook), but not the PC. The issue is that there is some music on the PC that's not on the laptop and so would be helpful to access it via the PC and not just the macbook.

If the video is HD, the resolution is too high for the iPod's screen, so iTunes will not sync the video.
If this is a purchase from the iTunes Store, and you paid for the HD version, you may be entitled to also download the SD version (at no cost), which should sync to the iPod.
FYI - There is a command in iTunes to create a new version of the video, which should sync to iPods
menu bar -> File -> Create New Version -> Create iPod or iPhone Version
However, videos purchased from the iTunes Store (such as movies and TV shows) have copy protection, so that command is disabled.

Nano 7th gen. charging issues

Is anyone else having trouble with a Nano 7th generation and brand new, that appears to be completely charged and when unplugged does not turn on?

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.

Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

IPod nano 7th gen not charging

I recently got an iPod nano 7th gen 16GB slate. Whenever I plug it into my MBP using the new connector, I get the PLUG in the battery icon instead of the usual lightning. When I finally unplug the iPod after keeping it plugged in for quite a long time, it seems like I didn't charge my iPod at all (all I get in the battery icon is a red line).
Is there something wrong with the battery or the cable??

Whilst charging make sure your iMac doesnt go to sleep and try to make sure itunes is constantly open whilst connected. If this does not work try restarting the device by holding down both the home button and slep button down.
Hope this helps

Charging iPod nano 7th gen

How long should I charge my ipod Nano 7th gen for maximum charge?

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

My ipod nano 7th gen is stuck on a loop of turning on and off.

My ipod nano 7th gen is stuck on a loop of turning on and off, I've already done the reset, and everything that was recommended on other similar questions. it isn't recognized by iTunes except in recovery mode where it allows me to restore but then goes right back to turning on and off once i'm back to normal play mode. Once on recovery mode it works fine and doesn't turn on and off. I've also uninstalled and reinstalled itunes to avail. I'm super frustrated and am hoping that I won't need to buy a new one. Is there anything else I can do before i just toss it out? i'm getting a bit frustrated just watching my ipod turn on to the apple and then turn right back off.

Hi there tksunrise,
You may find the troubleshooting steps in the article below helpful.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
-Griff W.

My ipod nano 7th gen has suddenly gone black and it wont turn on or connect to a power source.

I was listening to my ipod nano 7th gen when it went black and the music stopped playing. It wont turn on when i press the power button and when i connect it up to charge the screen doesn't turn on. Can anyone tell me how to turn it on again or give me suggestions.
Much appriciated,
MissC@t

Hey MissC@t,
Although the following article says 6th generation, most of the troubleshooting steps should still apply to your 7th generation nano. I'd go through the troubleshooting steps and see if that resolves the issue:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Have a good one,
Delgadoh

Ipod nano 7th GEN no audio out from head phones jack

I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
Thank you!

Can you provide a link to the monster product, or the model name/number? If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

Ipod nano 7th gen stuck on apple logo screen

New iPod nano 7th gen. At first attempt to upload songs, was prompted to update software. So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said. I didn't pay a whole lot of attention as i was not expecting any problems). I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost. At this point, the device has been stuck on the apple logo screen for a couple of hours now. The only response I can get from it is when I do a reset. The screen will black as it should and then go right back to the logo and stay. Please help.....Son not happy as this was one of his Christmas presents this morning. Really not looking forward to a trip to the apple store on the day after Christmas.

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

Ipod nano 7th gen problems synching

hello,
for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the exact syntax of the error but it had something to do with the ipod not being recognized and required a restore to factory.
I have corrected the first issue where the ipod was not recognized and had to be factory restored. Each time I restored, it would not be recognized by itunes.
I installed itunes on another pc and the same ipod synched and reconnected just fine, pointing back to the itunes install on my primary machine.
I resolved the first issue on my primary machine by following ht1923.
However, now the problem I see is that even though the ipod connects successfully , to my primary machine , when I synch and add music, no music shows up on the ipod even though itunes says synch successful. The ipod says "no music".
ipod serial number: C8NJRFX4F0GV
my primary pc is an HP Elitebook, running windows 7 professional 64 bit version
All itunes software completed removed and reinstalled clean.
Thank you

I would like to chime in that I've confirmed this as a reproducible bug on my iPod Nano 7th generation. I have an iTunes library with an offending compilation, and to avoid any possible tagging incompatability, I've converted the files to AAC with clean tags containing the album, artist, title, and track number. The album artist is "Various Artists" and I've checked off the "Part of a compilation" box for each track in my library.
These tracks all show their correct artists when I sync this library to my iPhone. However, when I sync the exact same tracks to my iPod Nano 7th Gen, it choose a random artist from amongst all the artists within the compilation and shows that artist name on *every* track.
iPod Nano 7th Gen has a bug in the firmware for displaying artists correctly when they are part of a compilation. The OP is likely doing nothing wrong. Apple needs to issue new firmware. Alternatively, I cannot think of any decent workaround short of splitting off each track of the compilation into a separate album, which, would be a huge pain and likely impractical for most people.

Why does my replacement iPod nano 7th gen not sync?

I've just got a replacement iPod nano 7th gen after my last one was faulty (suddenly having white screens etc) - exact same model type. I've charged it, and when I put the new replacement iPod in the computer it makes the regular sound to let me know its recognised the iPod. The iPod shows the 'connected - eject before disconnecting' sign so that part of it seems to be working.
I then go to devices looking to sync the music into my new iPod and then when I do that the 'Sync' button is grey and will not let me progress to sync. This is the problem I am having and I need help.
Let me know if you need any more information, thank you.

I am a UK resident btw If that helps.

IPod Nano 7th Gen Charging Issues

Similar Messages

Maybe you are looking for