IPod Nano 7th Gen Info Voice Over Continually Runs

I bought my Ipod Nano 7th Gen last year and for several months now ive had a issue with the voice over of track information that occurs when holding down the pause/play button on the side of the ipod. The voiceover continues to run and i am unable to stop it, meaning that i have to just turn my device off and leave it. I have tried turning it on and off, the voice continues to run once turned back on, i have reset it, restored it and the voice continues to play over. I find that i have to turn it off and leave it for a while until i can use it again with out the voice over contstantly yelling track information at me. The voice over generally only does this when i am using my headphones and more commonly when i am listening to a podcast, however it still occurs when listening to music. The actually accessbilbity voice over is turned off and i have tried everything i can to stop this from driving me crazy. Is this a glitch in my ipod, should i head to a genius bar or is there some other way of fixing it that i have not come across.
Thank You AnB

Hi there Kaetrin
It sounds like you have already tried a few things, but article below outlines a few settings for Spoken menus you may have missed.
Enabling Spoken Menus on iPod nano
-Griff W.

Similar Messages

I accidentally dropped by old ipod in the garage and drove over it. So I bought an ipod nano 7th gen. to replace it. Can I transfer the itunes from my old ipod to my new one? I only have about 30.

I accidentally dropped by old ipod in the garage and drove over it. So I bought an ipod nano 7th gen. to replace it. Can I transfer the itunes from my old ipod to my new one? I only have about 30.

AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup.

IPod nano 7th gen (brand new) doesn't recognize Headphones

I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
This is what happens:
When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
I have also restored the device in iTunes, and updated with no luck.....
Thanks in advance for any useful answer!
iPod nano

First, make sure the headphones plug is completely inserted into the nano's headphones jack. It should "click" into place. The fit may be tighter than expected, especially when new. There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
If that is not the problem, you should have the nano looked at under warranty. It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

Ipod nano 7th gen stuck on apple logo screen

New iPod nano 7th gen. At first attempt to upload songs, was prompted to update software. So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said. I didn't pay a whole lot of attention as i was not expecting any problems). I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost. At this point, the device has been stuck on the apple logo screen for a couple of hours now. The only response I can get from it is when I do a reset. The screen will black as it should and then go right back to the logo and stay. Please help.....Son not happy as this was one of his Christmas presents this morning. Really not looking forward to a trip to the apple store on the day after Christmas.

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

IPod nano 7th Gen. occasionally reboots

I've bought myself an iPod nano 7th Gen. about two weeks ago. I updated the firmware to 1.0.2 and synched some playlists on it. During the first two days my iPod nano shut down and rebooted itself about 10 times, no exaggeration. I went to my Apple Premium Reseller, turned it in and got a new one a few days later. I'm using that one for about a week now and I still got the same problems:
It happens when I wake the display up and music is playing. I hit the lock button, the music stops, the screen turns on and shows the Apple logo and then a few moments later the greyed-out homescreen with a spinner. Sometimes it shows the home screen directly and a spinner when I tap on the Music "app".
In some occasions I first hit the home button, the music kept playing and the screen stayed off, then I hit the lock button and my iPod reacted as described above.
Since two days, I observe another error which occurs often when editing a playlist or creating a new one, but also on wake up like above: The music stops, for about half a second a weird sound plays over the earbuds and then the iPod shuts down and I have to manually turn it on again (tap and hold on lock button).
I'm writing this now because I listened to music the whole day today and nearly everytime I took the iPod out of my pocket it rebooted like described above. I suspect that this is a software problem, so please, Apple, do something! These bugs make it really annoying for me to use my nano for what an iPod is for: listening to music.
Some further information: In iTunes, I checked the "Convert higher bitrate songs to 128 kbps AAC" option and filled the iPod nano with about 12 GB of music. I listen to music only with the Apple earbuds, no bluetooth headsets or car dock stations. For selecting songs, I mainly use playlists.

Okay, I tried unchecking "Convert higher bitrate songs to 128 kbps AAC" and this seems to solve the problem. Of course this is not satisfying because I can't fit all of my music on it anymore; but at least I can listen to it.
I still hope that someone at Apple reads this and tells me how to really fix that. For me, this experience is like buying a car that breaks down every 500 meters. An iPod nano that can't play back music without interruption is embarrassing!

Playlists will not sync onto iPod nano 7th gen

Since the very beginning of iPods, I subscribe to a number of podcasts that refresh in iTunes automatically. Once a day I transfer the "recently added" podcasts to a created playlist for my daily listening. This allows me to cull out music downloads from the pure podcast list. Since "podcasts" have been separated as an app, iTunes made it difficult to accomplish this. With iTunes 12 and my current iPod 7th generation, I can find no tip that will allow me to continue the practice. I want a continuously playing playlist of the most recently downloaded subscribed podcasts that can easily be refreshed and transferred to my iPod nano 7th gen at the end of each day.

There is no Apply button there, until you change something. Until you make a change to a setting on that screen, the button (where the Apply button is located) says Sync.
It is somewhat difficult to understand what you are describing. The Recently Added playlist is a smart playlist. It comes "pre-installed" with iTunes. However, if you right-click on it and select Edit Smart Playlist, you will see that the two rules for populating it are
Date Added - in the last - 2 - weeks
Genre - is not - Podcast
Therefore, if that is the playlist you are referring to, it intentionally excludes podcast episodes. If you want a new smart playlist that lists podcast episodes downloaded in the last two week, you can start with the Recently Added playlist. Don't modify that playlist. Right-click on it and select Duplicate. Name it (the duplicate) something like "Recently Added Podcasts" (or whatever you want). Right-click on it and select Edit Smart Playlist. Change the rules so that they are
Date Added - in the last - 2 - weeks <- You can change the number of weeks as desired.
Media Kind - is - Podcast
NOTE: I suggest using Media Kind instead of Genre, because it more accurately identifies items that are podcasts. Something can be a "podcast" without Genre set to Podcast. But everything iTunes shows as a podcast MUST have Media Kind set to Podcast.
That new smart playlist ONLY shows all podcast episodes downloaded in the last two weeks. You can then sync that playlist, if you want them all, or use it as the source to manually update your "daily podfest" playlist, and then select that playlist on the iPod's Podcasts screen (as described in my previous reply).

Am trying to sync my ipod nano 7th gen. i get this message: not enough access privileges."

i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
I have successfully done this in the past.
now I am getting a series of messages: "not enough access privileges"
have reset the nano and also downloaded latest iTunes software.
Any suggestions?

Hi,
I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
Thank you for reading this and any help would be greatly appreciated.
Best,
Dimitris.

Ipod Nano 7th Gen Lighting Oddity

I just recently bought a new Ipod Nano 7th Gen. and I've noticed that there is a large oval-shaped area in the middle that is darker than the surrounding area. It covers over half of the screen. It just seems like uneven lighting; the middle is simply darker and there is a distinct ovular edge where you can see the change. It is quite noticeable on certain screens. Has anyone ever heard of this problem? Also, if I were to take the Ipod back to the retail location I bought it at and showed them the defect, could I get an exchange?
Thanks

I also have an iPod nano 7th gen and I noticed the exact same thing! At first I thought it was because of a thumb swipe or something. It's bothering me.

My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manuaaly changed. All updates are current.

My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.

I had this issue with my 6th generation nano. It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

I recently purchased a bluetooth headphone set that I have been able to pair to my iphone6 , but it is not showing up on my ipod nano 7th gen, anyone else had a similar problem ?

anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts

THanks for the suggestion deggie , but I have already tried this without any success. I just mentioned pairing it to prove that the headphones weren't defective. I also tried reaeting the ipod through itunes hoping that might help , but still no detection on the ipod

Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

There is currently no such antenna available.
B-rock

Ipod nano 7th gen not turning on or connecting to laptop??

My son's ipod nano 7th gen won't turn on and when I connect it to the lap top a message comes up saying device driver not recognised - he was listening to it just last night, can anyone help? He's only had it since his birthday in November.

I reset the ipod by holding down the power button and the menu button and the apple screen came up after a few moments - this seems to have done the trick!

Ipod nano 7th gen not being recognized by itunes

i have the new hp split x2 laptop running windows 8. i kept ignoring the new itunes update and everything was fine but as soon as i installed it, itunes no longer recognized my ipod nano (7th gen). i have been sitting here for about 2 hours looking for answers so now i am asking for them instead. is there a way to uninstall the last update? i would go to best buy and just have geek squad fix it for free (because im covered for 2 years) but we are currently having a massive snow storm here in NY please help!

I'm trying to put songs on it

I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

IPod Nano 7th Gen Info Voice Over Continually Runs

Similar Messages

Maybe you are looking for