Ipod Nano 7th generation bluetooth compatiable with JBL flip

Just bought a new nano and it is not connecting via bluetooth with the JBL flip. It does not seem to detect the speaker at all. Any suggestion to check the blutooth of the nano is working at all.

If you do a search here you will find the Flip comes up often. Make sure no other devices that have paired to the Flip are in the room with you and clear all pairings and put the Flip in discoverable mode.

Similar Messages

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

Ipod nano 7th generation major UI issues !

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

Can 2 people listen with bluetooth earphones to ipod nano 7th generation?

Can 2 people listen with bluetooth earphones to ipod nano 7th generation at the same time? How?

No. Sorry. It can pair to other devices but there will be only one audio output.

Car Bluetooth Stereo and iPod Nano 7th Generation

Hi,
I have a Renault Clio (2000) with factory fitted stereo which has just decided to break. I would like a new stereo to replace the old one but want to be able to wirelessly connect my iPod Nano 7th Generation (i.e. Bluetooth) as I hate using an AUX cable in my car. Which stereo would be suitable for my iPod. I have a budget of around £100 and looked on Halfords but no of the stereo's stated they would play over Bluetooth.
Any Help would be greatly appreciated.
Thanks,
Nathan

You are looking for one that supports Bluetooth profile A2DP.

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

Hello there, kiwilucea.
The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.

I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply.

Ipod Nano 7th generation touch interface is now screwed with due to apple update.

Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
DO SOMETHING ABOUT THIS APPLE

Hi ImAMinion.
Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
From the home screen I got to settings by swiping up and down instead of the normal left and right.
To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
Hope that helps.

My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed. click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
click on music check mark music done and sync
problem solved
thanks apple

Just recieved ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes

Just recieved a brand new replacement ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes, I have tried resetting ipod. I have uninstalled itunes and reinstalled itunes. I have tried various cables and know they are compatible for charging the ipod, what else could it be?
Darlene

Hi Darleneann8,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano not being recognized on your PC:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
I hope this information helps ....
- Judy

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

Just bought an IPod nano 7th generation. I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?
Thanks to your feedback.

Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
(74380)

Does anyone know if the Sony JamBox RDHGTK33IP 420W is compatible with the ipod nano 7th generation?

It doesn't say so on the box, just the ipod nano 6th and earlier. I am hoping someone already tried using the 7th and has an answer.

Hello Jay,
Welcome to the Sony Community.
The Sony RDH-GTK33iP Home Audio Docking System is not compatible with iPod Nano 7th generation.
Thank you for your post.

My ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.

Is the Apple AC adapter model A1102 compatible with the ipod nano 7th generation?

Is the Apple AC adapter model A1102 compatible with the ipod nano 7th-generation?

Deggie,
Thanks for the info. As soon as my Ipod nano needs charging I'll use my A1102 charger.
Dave Mills

Ipod Nano 7th generation bluetooth compatiable with JBL flip

Similar Messages

Maybe you are looking for