Ipod nano 7th generation Headphones jack dented :(

ipod nano 7th generation Headphones jack dented help? how much does it cost to un-dent it? is it even possible? I can't put my headphones in. :((

This is rediculasly common for this device. Hopefully Apple gets the design right next time around by moving the earphone jack ever so slightly towards the center.
Anyway, are there any suggustions for moving it back properly yourself?

Similar Messages

  • Ipod nano 7th generation socket

    My ipod nano 7th generation headphone jack appears to be too small. It won't stay when I plug the headphone into the socket. How do I make it stay?

    Be more assertive with the push. New nano jack is a bit tight. Cheers!

  • Why won't my BRAND NEW iPod Nano 7th Generation recognize headphones?

    My BRAND NEW iPod Nano 7th Generation (purchased from and Apple Store less than a week ago) will not recognize any headphones.  Consequently, I can hear NO sounds.  It worked just fine right after I set it up. I turned it off, disconnected headphones that came with the Nano. Several hours later I turned it on again, plugged in the headphones, and then I could hear NOTHING. When I tried the radio, I got the message there was no signal because it said the headphones were not plugged in, which they were.  I have tried two other sets of headphones.  None work, but they all work in another iPod, so I know it is not the headphones. I restored the software and started over, but this didn't help either.  I have pushed the headphone jack in as far as possible. This is very frustating because this Nano was a birthday gift for my husband.   I will be grateful for any help.  Thanks a lot.

    Thanks SO much for the GREAT advice!  I did just what you said, and I am back in business.  The sound is fine, and the radio works. I cleaned out the jack with a tooth pick, blew some air in, and pushed the jack in a bit harder.I guess I was too tentative about pushing the jack all the way in. You were right that it is a tight fit.  Thanks again, deggie.  My husband thanks you also! His birthday gift now works!  Yay!

  • My ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

    my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

    Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • There is a very loud, distorted sound coming from my Ipod Nano 7th generation no matter what headphones i use. Any fixes?

    I bought an Ipod Nano 7th generation and out of the box, there was a really loud distorted sound as soon as i pressed play. When i press pause, it stops. If i use a different pair of headphones is does it. So, i exchanged it, and all was good for about three weeks, now even the new one is doing it. The sound is so loud and fuzzy that i cant even hear what the song is supposed to be.

    First, ipod nano 7th gen does not have a built-in speaker. Second, a brand new nano jack is sometimes ifficult to insert, make sure it is fully inserted or flushed to the ipod body. Cheers!

  • I have a new ipod nano 7th Generation.  When I plug in the earphones, there is no sound, althought ipod shows song is playing.  Any solutions?

    I have a new Ipod Nano 7th Generation.  When I plug the earphones in, there is no sound coming from the earphones, even thought the Ipod shows the song as playing.  Any solutions?

    And the Radio app probably doesn't work either.
    The headphone jack on the nano is very tight when new. Push the jack all the way in, the plastic on the headset jack should be flush with the body of the nano.

  • Ipod nano 7th generation is playing but I cannot hear the music

    I have a 16 gb  ipod nano 7th generation.  I've followed all the instructions in syncing and all seems fine except I cannot hear the music through the earbuds, even though the ipod shows it is playing.  What am I doing wrong?
    Thanks shielafromgresham

    Hi shielafromgresham,
    Welcome to the Apple Support Communities!
    If you are not getting any sound from your headphones on your iPod nano, I suggest reading over the information in the following article. Along with the information in the Acoustics section of the article, make sure the headphone jack is pushed completely into the headphone jack.
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Acoustics
    Follow these steps if there's no sound coming from your headphones.*
    Verify that the headset is plugged in to the iPod .
    Check the volume setting.
    Try adjusting the volume by pressing the volume buttons.
    Try another song or audio file.
    Try another headset.
    Reset iPod by holding down the Sleep/Wake button and Home buttons until you see the Apple logo appear.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Have a great day,
    Joe

  • Ipod Nano 7th generation suddenly stopped working!

    I've had the new ipod nano 7th generation for about a month. It has suddenly stopped playing music through my headphones, the headphones are'nt broken and everything else is working fine, any suggestions to what the problem could be??

    Is it still covered by warranty for replacement? If yes, I recommend to make that request. Cheers!

  • IPod Nano 7th Generation Mulitple Composers

    Hello I have an iPod Nano 7th Generation using Windows 8 iTunes 12. For an example I have a song Wolfgang Gartner - Illmericaand Wolfgang Gartner & Tom Staar - Evil Lurks. But on my iPod Nano 7th Generation when I tap 'Artists' I find
    Wolfgang Gartner
    Wolfgang Gartner & Tom Staar
    Is there a way to fix this in iTunes 12 Windows 8.1? If so please say so. If NOT please so as well! If you don't fullly please ASK! Thank you!

    Make sure the headset is plugged all the way in. It is a very tight fit, the plastic on the headset jack should be flush with the body of the Nano.

  • Can i use my new ipod nano 7th generation on my macbook pro

    I registered my new ipod nano 7th generation on my macbook pro.  While on my macbook, I tried to download wma audiobooks from the library using overdrive media console & its not working.....so, I decided to use my windows laptop.  I have the latest version of itunes on both laptops.  (I know I can download & transfer wma audiobooks to my shuffle using overdrive media console & windows laptop.)  I'm getting an error message that says I have to reformat my nano if I want to download wma audiobooks.  Can I use my nano on macbook pro & windows laptop?  will I ever be able to download wma audiobooks to my nano using macbook? 

    Your iPod Nano will need to be restored in iTunes on the Windows laptop before you can start adding/syncing content over to it.
    Or if you want to use it with OverDrive on the Mac, you'll need to download the books as MP3s as WMA is not supported.
    B-rock

  • How do you dowload songs from iPod nano 7th generation to iTunes on another computer?

    I have iTunes on two computers. I bought a movie on one computer, but through a series of events had to erase my iPod on that computer and sync it to a different computer. Now, it will not sync the movie unless it is on the computer I bought the movie from. Because I erased my iPod on the computer I bought the movie, I have to download my iPod to the computer I bought the movie on in order to sync the movie to my iPod. How do you download everything on the Ipod nano 7th generation to iTunes on another computer?

    Hello I.lmoss,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Have a nice day,
    Mario

  • How do i add videos to my ipod nano (7th generation) ?

    How do i add videos to my ipod nano (7th generation) ? I uploaded the videos on my itunes but whenever i select "add to my ipod" a message comes out saying: "This video was not copied to the ipod because it cannot be played on this ipod." So what shall I do? And in what form should the video be to be played on the ipod?

    Hi there Engy Hossam,
    You may find the information in the article below helpful.
    iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
    http://support.apple.com/kb/ts1497
    -Griff W. 

  • How do I shuffle a playlist during a workout on an ipod nano 7th generation?

    How do I shuffle a playlist during a workout on an ipod nano 7th generation?  The only shuffle option I see is for all songs, not a specific playlist.  I know that I can begin a workout using the now playing option.  This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option. 

    This is from the Nike support page:
    <http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
    Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

  • How do i share music between 2 users on one computer with ipod nano 7th generation

    How do I share music on itunes between 2 users on 1 computer and get the music from the computer onto my ipod nano 7th generation?

    Hi kstrenge,
    Welcome to the Apple Support Communities!
    I understand you want to share iTunes music on the same Windows XP computer between two different user accounts. To accomplish this please read over and follow the steps in the attached article.
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Once the music is shared and you are ready to sync your music from the computer to your iPod nano, please follow the steps in this article.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Have a great day,
    Joe

  • How do I transfer iTunes playlists to my iPod nano 7th generation

    I just received a new iPod nano 7th generation and want to transfer my playlists in iTunes to the nano.  I have been unable to find instructions for this in the manual or online.  Can you help???

    Select it in the iTunes sidebar, click on its name, and type a new name. If you're using iTunes 11, choose to show the sidebar from the View menu.
    (73513)

Maybe you are looking for

  • Essbase Client 32 bit on the Solaris SPARC 64 bit Cognos server - Need help

    Hello All, I have a SunSolaris SPARC 64 bit OS on which i have the 32 bit Cognos 8.4.1 installed. I now wanted to install a 32 bit Essbase client on this server. can anyone please let me know if there exists a 32 bit essbae client which can be instal

  • Use if LEINT_DETERMINE_DURATION function module in PI sheet

    Dear Forum experts, I am using Browser based PI sheet and trying to configure process instructions characteritics to be able to use FM "LEINT_DETERMINE_DURATION" for duration calculation. I would like to hahve start time and date and end time and dat

  • Document Nos in CO...

    Hi, I have run one report in "CO", and now when the report has been displayed it also has a column for document no.. I want to enter the document no which has been displayed in the report, so is there any t code to veiw the document no which has been

  • Robohelp displays twice in IE 9 when used in an iFrame

    I am building an application for a client who needs to be able to control access to their Robohelp content.  I am doing this by displaying the Robohelp content inside of an iframe in another page (ASP.NET).  The problem is the entire Robohelp framese

  • Properties panel shortcuts

    I'd like to have more control over the Properties panel and when it appears. Is there a keyboard shortcut to Collapse/Expand the Properties panel? (I know about Ctrl-Shift-D, but that toggles through the open panels.) Is there a way to prevent the Pr