Ipod nano 7th generation Music Lost !

Hi there, I bought my Ipod Nano on 12th of October. Until today I was usding it everyday in fitness with nike software with 1800 songs. However today morning when I powered on it says there is no music in it. When I go in the menu about section, I don't see any music but Usable Memory is only 848 MB. So the songs are there but it does not see them. Could you please help me?

reseting sometimes doesn't work properly....
connect to any iTunes and then it will sync all over again....
disconnect after sync!!!!! that's important!
perhaps this mysterious disappearing was a result of a bad/unsuccessful sync

Similar Messages

  • How do i share music between 2 users on one computer with ipod nano 7th generation

    How do I share music on itunes between 2 users on 1 computer and get the music from the computer onto my ipod nano 7th generation?

    Hi kstrenge,
    Welcome to the Apple Support Communities!
    I understand you want to share iTunes music on the same Windows XP computer between two different user accounts. To accomplish this please read over and follow the steps in the attached article.
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Once the music is shared and you are ready to sync your music from the computer to your iPod nano, please follow the steps in this article.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/HT1351
    Have a great day,
    Joe

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • Ipod nano 7th generation is playing but I cannot hear the music

    I have a 16 gb  ipod nano 7th generation.  I've followed all the instructions in syncing and all seems fine except I cannot hear the music through the earbuds, even though the ipod shows it is playing.  What am I doing wrong?
    Thanks shielafromgresham

    Hi shielafromgresham,
    Welcome to the Apple Support Communities!
    If you are not getting any sound from your headphones on your iPod nano, I suggest reading over the information in the following article. Along with the information in the Acoustics section of the article, make sure the headphone jack is pushed completely into the headphone jack.
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Acoustics
    Follow these steps if there's no sound coming from your headphones.*
    Verify that the headset is plugged in to the iPod .
    Check the volume setting.
    Try adjusting the volume by pressing the volume buttons.
    Try another song or audio file.
    Try another headset.
    Reset iPod by holding down the Sleep/Wake button and Home buttons until you see the Apple logo appear.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Have a great day,
    Joe

  • How do I shuffle a playlist during a workout on an ipod nano 7th generation?

    How do I shuffle a playlist during a workout on an ipod nano 7th generation?  The only shuffle option I see is for all songs, not a specific playlist.  I know that I can begin a workout using the now playing option.  This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option. 

    This is from the Nike support page:
    <http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
    Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

  • Ipod Nano 7th Generation is saying Use Itunes to Restore. Itunes no longer recognizes my device

    Please Help, My Ipod nano 7th generation was syncing. When I disconnected from my computer, I no longer had any music on it. When I plugged it back in Itunes prompted me to restore my Ipod. I went ahead and restored it, but it kept asking me to restore. When I unplugged my ipod, I got a white screen saying Use Itunes to Restore. Problem is Itunes no longer picks up my device. I've tried plugging it into different USB ports, I've tried to update Itunes to the newest version, and uninstalled and reinstalled itunes. I've tried to reset the ipod, but it still goes back to the white screen saying "Use Itunes to Restore". I've been trying everything. Please Help.
    Thanks

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My ipod nano 7th generation is stuck in a restore loop with a white screen. Now it won't turn on anymore. What to do?

    My new Ipod Nano 7th generation is stuck in a restore loop. Here is what happened: I added music to it using the latest version of iTunes, the colored bar at the bottom of the summary tab in iTunes showed my that I added it and I disconnected it to listen to the music. As I turned it on, it told me that there is neither music nor pictures on it. So I connected it again to my computer and iTunes told me that I had to restore. Which I did following all the steps but it keep telling me that I need to restore it. After three times of restore it, I disconnected it from my PC and turned it off. Now it won't turn on anymore - even though the battery is fully charged - and when I connect it to iTunes, iTunes tell me "The iPod software updater could not be contacted. The server does not support this version of iTunes." Well, I just downloaded the newest version a couple of minutes ago from the apple website. My iPod stays black. What shall I do?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

    I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

    Hello apbvieira,
    It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    This step will get you started, but there are additional steps in the article if you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Ipod Nano 7th generation suddenly stopped working!

    I've had the new ipod nano 7th generation for about a month. It has suddenly stopped playing music through my headphones, the headphones are'nt broken and everything else is working fine, any suggestions to what the problem could be??

    Is it still covered by warranty for replacement? If yes, I recommend to make that request. Cheers!

  • Would you recommend iPod nano 7th generation?

    I've got a iPad 2 and a iPhone 4. I'm thinking about getting a iPod nano 7th generation. I use iCloud but I know that the iPod nano doesn't have iCloud so I started syncing with iTunes. I do it about every 2 weeks. Would anyone recommend the iPod nano to me? I just want a very portable device that I can use to track my walks and listen to music and the radio. Who would recommend it to me? It looks really cool though.

    An iPod Nano is portable, you can listen to music and the radio, you can even use Nike+iPod while you walk. However nobody here is going to recommend an iPod for you to purchase. Sorry friend we are here to help people fix issues with their devices and nothing more.

  • Itunes has stopped detecting my ipod nano 7th generation

    Hi I have recently bought an ipod nano (7th generation). Initially I connected it to my computer and everything was working fine but it has now stopped appearing when I connect it to iTunes. It connects - the ipod screen shows it is connected - but I cannot sync it or transfer music.
    I have tried it on my wife's computer and it works as normal but all my music is on my laptop. I don't know if I need to download a mobile support or something but it's very frustrating. I have the latest version of iTunes on  both laptops/
    I've followed the steps on the online help but the ipod isn't even appearing in my laptop's device manager. Gratedful for any help

    It's working now, apple must have updated itunes that fixed the issue, not sure.

  • My iPod nano 7th generation won't sync video

    My iPod nano 7th generation will sync music but not video. I have updated iTunes and restored the iPod even gone into the Apple store and nothing has helped. How do I get around this problem???

    Not all iTunes video can be transferred to iPod, If the video resolution or video bit rate beyond iPod limitation, you can't upload them to iPod. For example, some iTunes purchased movie are High definition movie, the resolution is too high to play on iPod. If the videos are in your iTunes, you can right-click the video to highlight it, and then select "Create iPod or iPhone Version". iTunes will automatically convert the video to iPod compatible format. When the conversion process has completed, sync the new version to your iPod. For more info, here is a guide about how to convert and transfer video to iPod nano. Hope it helps. Feel free to email me if you need further help.

  • My ipod nano 7th generation won't sync ratings to itunes. What can I do?

    Hi,
    I have an Ipod nano 7th generation bought about a month ago and usually has no problems.
    I've been having an issue with it where it won't sync songs' ratings from the Nano to Itunes. My Ipod is set to manually manage Music and Video. And no ratings are added to the Itunes Music library when I press sync.
    Can anyone help me solve this problem?
    Thank-you.

    This is literally driving me crazy.
    I spend days, or more likely months rating my itunes library.
    I was happy to get this new ipod as it would permit me to finish rating my songs, as I used to with my old ipods.
    Its only about 3 weeks after buying this new ipod do i realize that it is randomly changing song ratings. It has therefore changed all the ratings i painstakingly had made. After trying many different ways to find out where the problem was coming from, I even did the drastic move of unrating all my songs, both on the ipod and itunes. Sure enough, when i plugged it back in to sync it, it was giving me new random ratings for about 40 songs, even though they had previously been totally blank.
    I'm extremely surprised I can't find any information about this. This bug has killed all the work I had spent trying to organize my library, and leaves me feeling quite disgusted.
    edit:
    There seems to be an all around problem with this new ipod. It isn't showing the play count for songs I know i listened to, and it's adding random songs in my top 25 most played that i never listened to.
    An answer would be very nice.

Maybe you are looking for

  • Is Adobe Media Encoder like Compressor?

    Is it best to export a finished sequence in a lossless format and then encode for distribution through Media Encoder?  Is AVI/UT a good choice for the initial export? Thanks, James

  • HT203097 Sync windows live contacts and iphone 5s

    Please help.  I am unable to synch my window live contacts (2012 version) with my new iPhone 5s 16G with iOS 8.1.2.  Only two of the 70 or so contacts come across. Thinking something might be off on the MS side, I  exported all the contacts to CSV, r

  • Re-installing OS issues...

    alright, so I may have screwed something up big time, but hopefully someone can help. I got my macbook fall 2007 and am currently still using Tiger as it does what I need it to do. I had a lot of useless things slowing my mac down so I decided to try

  • ALE Change Pointers in source system not active

    Hi All, I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error: "ALE Change Pointers in source system not active" I have carried out the following steps in an attempt to resolve the

  • Multiple pane level

    I am referring the Complex Form from the sample.How can I set both the pane levels to Folder 1 and Folder 2 respectively ? If we refer the Item Master form,the folder General is different from Purchasing data.All the folders are diffrent from each ot