Ipod nano 7th Generation not connecting to itunes

I bought my Ipod nano in January of this year, and have been using the same computer and operating system to access Itunes since I brought it home.
As of this month, whenever I try to connect my Ipod to Itunes to sync my music, it states a message consisting of "An Ipod has been detected, but it could not be identified properly." I had updated the version of Itunes, so with the research I did in the forums, I uninstalled Itunes, reinstalled, and restarted my computer. I then connected my Ipod and it connected. Hooray. While syncing music, it then popped up a message saying that the music files I was trying to sync were not compatible with my Ipod. I checked the file type; AAC. I disconnected my Ipod, reconnected, and it displayed the first message yet again.
I have used this computer and many of the music files on my previous Ipod nano 5th gen before I purchased my new one, and everything worked perfectly.
I haven't found any other forums that really address this issue, so any help is appreciated.

Hi ..
Try this suggestions in this support article >  iPod nano: Error message saying that iPod 'could not be identified properly'

Similar Messages

  • My ipod nano 7th generation not recognised by itunes

    I have done all steps advised by apple support, but my new ipod nano is still not recognised by itunes (latest version). My laptop is HP windows 7. It can see the apple device only as storage but when i open itunes, my ipod nano does not appear at all. pls help...

    Try one or more of the following:
    > Restart your computer
    > Uninstall and resinstall iTunes
    > Register Your iPod Nano
    > iPod not appearing in iTunes
    > Restoring iPod to factory settings

  • IPod Nano 7th Generation not charging

    Has anyone had trouble with their iPod Nano 7th Generation not charging?

    Hi ncpower,
    If you are having issues charging your iPod Nano, you may find the following article helpful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/ht1384
    Regards,
    - Brenden

  • Ipod Nano 7th generation not recognized by computer or iTunes

    Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • Ipod nano 7th generation not showing up on itunes.

    I just got my Ipod Nano 7th Generation for christmas, and it has worked great till recently on the itunes program, it began showing this message:
    "The software required for this ipod is not installed correctly. Please reinstall Itunes to install the required software."
    I HAVE REINSTALLED ITUNES 5 TIMES ALREADY!!! And nothing! and i do mean NOTHING. IS. WORKING. Its giving me a very big headache. Please. Someone. Help. Me

    HI alivia-rose!
    Here is an article that will help you troubleshoot this issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • IPod nano 7th gen not found in iTunes/"no disc in drive" Windows computer.

    I bought a brand new iPod nano 7th generation yesterday. When I plugged it into my Windows computer it began set up then stopped and a pop up appeared ''no disc in drive'' directly after that the next pop up read ''iPod cannot sync because it was not found''. My iPod is charging the entire time until that second pop up appears and then my iTunes acts as if the device was unplugged from the computer, it stops charging and at the top of my iTunes screen it says "OK to disconnect". I tried putting my iPod into "disk mode" but the same two pop ups still come up and the same thing happens. And even though iTunes recognizes the iPod as being unplugged even before it is, even after I do unplug it my computer still thinks it's attached, down in my tool bar it's still there waiting to be disconnected. As soon as iTunes begins starting up with my iPod it says there's no disc and then that the iPod can't be found even though it's still plugged in. I can't get any music on it let alone get my computer to recognize it for longer than 30 seconds. I really don't want to return it because my iPhone4 is full and can't fit any more music so I needed this iPod.

    Hello Abbey,
    I would recommend the steps in this article named iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538. While the title of the article describes a symptom a bit different from yours, I feel the troubleshooting is still relevant.
    If that does not resolve the issue, then I would suggest this article to help troubleshoot the USB connection.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/ts1286
    And lastly, resetting it just may do the trick.
    How to reset an iPod nano (7th generation)
    Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    From: How to reset iPod
              http://support.apple.com/kb/ht1320
    Take care,
    Sterling

  • IPod nano 7th gen not recognised in iTunes using Windows 8.1

    I have an older 3rd generation iPod nano and a new 7th gen nano and I would like to sync them to the same iTunes on my Dell laptop (Inspiron 7520) running Win8.1. I have also updated iTunes to the latest version.
    When I connect the new 7th gen iPod nano to my laptop via USB (tried all 4 ports)  I get the following error message from iTunes:
    "An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again."
    I've been through most of http://support.apple.com/kb/TS3218  and still get the error message although I haven't tried connecting the iPad nano 7th gen to an older Win7 laptop yet with a fresh iTunes install.
    When connecting the iPod nano7 Win8.1 recognises E: as an iPod very briefly after I have run a scan via McAfee. After a few seconds the E: drive disappears and iTunes reports the error message as above.  Sometimes, E: doesn't disappear in Win8.1 but I still get the iTunes error message and the iPod nano itself goes from Connected to Main menu.
    Any ideas how I can get iTunes to recognise my 7th gen nano?  I'm not sure if this is a Win8.1 problem or iTunes.

    Hello Abbey,
    I would recommend the steps in this article named iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538. While the title of the article describes a symptom a bit different from yours, I feel the troubleshooting is still relevant.
    If that does not resolve the issue, then I would suggest this article to help troubleshoot the USB connection.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/ts1286
    And lastly, resetting it just may do the trick.
    How to reset an iPod nano (7th generation)
    Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    From: How to reset iPod
              http://support.apple.com/kb/ht1320
    Take care,
    Sterling

  • Ipod Nano 7th Generation is saying Use Itunes to Restore. Itunes no longer recognizes my device

    Please Help, My Ipod nano 7th generation was syncing. When I disconnected from my computer, I no longer had any music on it. When I plugged it back in Itunes prompted me to restore my Ipod. I went ahead and restored it, but it kept asking me to restore. When I unplugged my ipod, I got a white screen saying Use Itunes to Restore. Problem is Itunes no longer picks up my device. I've tried plugging it into different USB ports, I've tried to update Itunes to the newest version, and uninstalled and reinstalled itunes. I've tried to reset the ipod, but it still goes back to the white screen saying "Use Itunes to Restore". I've been trying everything. Please Help.
    Thanks

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • Can the ipod nano 7th generation support apps from itunes?

    is it possible to get games or some other apps from itunes, ON my ipod nano 7th generation? just got it and was wondering

    No.
    (74913)

  • Ipod Nano 7th Gen not syncing with Itunes

    My 1 week old nano wont sync with Itunes anymore. I have tried rebooting it and reinstalling Itunes too, but nothing is working. It is connecting at random time but not everytime I try connecting it. I once plugged it into a different desktop and it shut down, after that it isnt connecting properly with my system. Is this the problem here?

    Hey VandanaR,
    Thanks for the question. Based on the information you have provided, it sounds like you are unable to sync your iPod because it is not connecting to iTunes. If you are experiencing this issue on a Windows computer, you can follow the applicable article from this resource:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • Help: iPod nano 7th gen not syncing with iTunes or Windows XP.

    Please help !
    When we connected and followed the steps the first time, it worked perfect. But after we uploaded some CDs and tried to reconnect the PC does not see the iPod nano at all. not even on Device manager.

    Hey VandanaR,
    Thanks for the question. Based on the information you have provided, it sounds like you are unable to sync your iPod because it is not connecting to iTunes. If you are experiencing this issue on a Windows computer, you can follow the applicable article from this resource:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • IPod Nano 7th Generation Not Being Recognized?

    I've downloaded the latest version of iTunes 11 which is titled, "iTunes 11.0.1," last night and it hasn't been recognizing my iPod Nano 7th Generation. Anybody having this problem?

    Did it work with the previous version of iTunes?

  • Ipod Nano 7th Generation - Not Charging / Error Msg From Comp 'Attached Device Malfunctioned'

    My IPod Nano 7th gen arrived last night.  I was able to turn it on and select language 'english'  When I connected it to my computer it did not recognize my iPod, so it also did not show up in iTunes,  Error message: "One of the USB devices attached to this computer has malfunctioned.  and Windows does not recognize it." 
    My Nano turned off and went blank.   I have tried to reset it.  Nothing works, just blank.
    No charge icon, I have tried all USB ports on my comp, but nothing works- (but my USB ports work fine)  I have read that if my iPod has not been charged fully, the computer my not recognize it.
    I am now using an adapter and trying to charge it thru the wall power socket.  It has been connected for half an hour.  Still cannot turn iPod on.
    I have Windows 7 running on comp.  Itunes is current version 10.7.  I have rebooted my comp several times and re-installed iTunes.
    I have an iPhone and an iPod shuffle that are both synced with iTunes on this comp, they work fine.
    Is my iPod broken?  Do I send it back?  Anyone else having the same problems?  Please Help !!

    I had this problem as well.  I have a PC running Windows 7. I have installed the latest iTunes 10.7 software (64 bit). I reset the nano by holding down the start and home button for 10 seconds.  Then - I plugged it into a PC running Windows XP and was able to format the iPod. Ejected it and plugged it into my Windows 7 computer and then the computer recognized it and I was able to load it. There is some problem with iTunes 7 on Windows 7.

  • Ipod nano 5th generation not recognized by itunes

    I just got a new iPod nano and when I connect it, nothing happens. Itdoes not appear in the device list in iTunes. The nano screen says it is connected but I didn't get to even set it up in itunes. I've tried everything on the apple site - uninstalled itunes and then reinstalled, reset the ipod. I just can't restore because the apple site says I need to do that through iTunes, but I can't b/c it's not showing up in the device list. VERY FRUSTRATING!!

    help, i got a new ipod 5th generation and itunes is not recognizing the ipod. I've tried everything, I even restored it on my dads computer. I lost all my files and I'm extremly frustrated. I'm not pluging it into the wrong port b/c I have a PC so its clear what port I'm putting it into, the ipod is chargining, and the video's are coming up, but the ipod is not syncing, I don't know what to do.
    please email me at: [email protected]

  • IPod Nano 7th Gen not appearing in itunes

    My ipod nano 7th gen is not appearing in itunes, either the new one or the old. it is registered on the computer, but I can't access it through itunes. It was woring a few weeks ago. I have Windows 8 and the newest itunes.

    I came across this problem three days ago. Have tried everything. Went through all the steps Apple suggests for solving this problem. Nothing worked. The iPod is recognized by my wife's MacBook, but not by my Windows 7 PC. I'm at wits end.

Maybe you are looking for

  • AP - Transaction S_ALR_87012078 (Due Date Analysis for Open Items)

    Hi, I have an enquiry regarding the above mentioned transaction from Accounts Payable. After executing this report, the DUE and NOT DUE amounts are group according to the number of days (such as 0-30, 31-60, 61-90). Is there any way i can display the

  • Reset Row Selection from Web Item Analysis in WAD 7.0

    Hi All, I have a Web Item Type Analysis and I use the Row Selection (SELECT_ROWS) value multiple. Is there a way to reset the selection via a function? The user select some rows and start a planning function via a button. If they would like to start

  • Setting bean field in view

    How can you set a value in a bean from the view?

  • PDF comparison through Javascript

    Hi, Is it possible to compare two PDF through Acrobat Javascript. Also i need to save the comparition report in a separate PDF. I know there is an option in Acrobat to get this, but i need to run this for batch of files. Thanks, Gopal

  • SUNOPSIS to ODI migration : AS/400 error in work repository upgrade

    Hi, We're migrating SUNOPSIS v3.2.02.19 to ODI 10.1.3.5.0, with repositories on DB2 AS/400. We achieve to migrate master repository without any problem, and we try now to migrate the work repository and we have the following error : +java.sql.SQLExce