IPod Nano (7th Generation) skipping throughout current song

So my iPod Nano (7th Generation) is skipping during just about every song that I play. The current song that I will be listening to will remain playing, but it will constantly skip throughout that same song (may sound weird... I know) unless I change to the next song or restart that current song over again. It could be a defect but I'm not 100% positive what it is. Someobdy please help me!!! Thanks

Looks like I might have fixed it.  I reset to the factory default and then made the iPod do a re-start before I re-synced my songs.  So far so good.

Similar Messages

  • How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    Hi TheGuru146,
    It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    -Jason

  • I have a new ipod nano 7th Generation.  When I plug in the earphones, there is no sound, althought ipod shows song is playing.  Any solutions?

    I have a new Ipod Nano 7th Generation.  When I plug the earphones in, there is no sound coming from the earphones, even thought the Ipod shows the song as playing.  Any solutions?

    And the Radio app probably doesn't work either.
    The headphone jack on the nano is very tight when new. Push the jack all the way in, the plastic on the headset jack should be flush with the body of the nano.

  • I have two library's on new Pc I purchased new songs and they are in my sons library and now I can't sync to my ipod nano 7th generation any ideasto correct

    I recently had two library's transferred to new computer.  I purchased new songs and they ended up in my son's library so I can't sync to my Ipod Nano 7th generation. Is there a way I can merge the library's so I have access to all?

    If she has an ipod touch then just sign into her apple I.D. On the computher and sync your ipods. Tell me the result

  • How do you dowload songs from iPod nano 7th generation to iTunes on another computer?

    I have iTunes on two computers. I bought a movie on one computer, but through a series of events had to erase my iPod on that computer and sync it to a different computer. Now, it will not sync the movie unless it is on the computer I bought the movie from. Because I erased my iPod on the computer I bought the movie, I have to download my iPod to the computer I bought the movie on in order to sync the movie to my iPod. How do you download everything on the Ipod nano 7th generation to iTunes on another computer?

    Hello I.lmoss,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    Have a nice day,
    Mario

  • I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

    I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

    Hello apbvieira,
    It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    This step will get you started, but there are additional steps in the article if you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Ipod nano 7th generation-formatted :

    My girlfriend gifted me a brand new ipod nano 7th generation two weeks back. To upload songs in the ipod I connected to pc and it asked me to format the ipod and mistakenly I have formatted ipod nano (7th). Now it won't shut down nor do any activities. It is also not recognized by itunes. Now how to I revive it? Your help is much appreciated.
    Thanks

    If you formatted the iPod's storage using Windows, it is erased along with the iPod's software.  You will need to do a Restore using iTunes.  If iTunes currently does not recognize the iPod when you connec it, try putting the iPod into Disk Mode first
    http://support.apple.com/kb/ht1363
    Run iTunes on the computer and connect the iPod.  If iTunes sees the iPod, it may say something about "recovery" and should prompt you to do a Restore.  The Restore re-installs the software, so it should be back to the way it was when you took it out of the box.

  • Ipod Nano 7th Generation Car Radio Controls via USB Cable.

    When I use my USB connection in my Hyundai for my ipod nano 7th generation, instead of playing what it was playing when I plugged it in, as it did with my previous nano, it plays random songs and I cannot navigate to podcasts I want to listen to as the navigation is clumsy and displays file names which are meaningless to me. How do I get it to play what I want to in my car?

    It does not matter, as i stated this happened to me doing both. Currently I am using it now with the car, I got a newer car last week. But I think when I get out of the car it pauses anyways. I have noticed that if pauses I don't touch it, it stays on the same song for maybe 1 day.
    If I don't use car for 3-4 days, it starts over again. That shouldn't matter though, if I did turn it off? I need help.......

  • How do I shuffle a playlist during a workout on an ipod nano 7th generation?

    How do I shuffle a playlist during a workout on an ipod nano 7th generation?  The only shuffle option I see is for all songs, not a specific playlist.  I know that I can begin a workout using the now playing option.  This will allow me to shuffle a playlist in the begining of my workout, but if I want to change music I cannot get back into shuffle mode unless I select the shuffle all songs option. 

    This is from the Nike support page:
    <http://support-en-us.nikeplus.com/app/answers/detail/a_id/20976/p/3169,3171
    Shuffle Songs: Plays songs shuffled randomly from your music library. To shuffle a playlist rather than your entire music library, start the playlist in shuffle mode before setting up your Nike+ workout. Then, when setting up your workout preferences, select "now playing" in the Music menu.

  • Ipod Nano 7th generation not recognized by computer or iTunes

    Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • IPod Nano 7th Generation will not turn on

    My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
    All songs on the device have disappeared.
    Shows in iTunes - even shows as having a fully charged battery.
    Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
    Have changed USB ports, from computer to AC powered USB charging station.
    Help?

    Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me

  • IPod Nano 7th Generation Mulitple Composers

    Hello I have an iPod Nano 7th Generation using Windows 8 iTunes 12. For an example I have a song Wolfgang Gartner - Illmericaand Wolfgang Gartner & Tom Staar - Evil Lurks. But on my iPod Nano 7th Generation when I tap 'Artists' I find
    Wolfgang Gartner
    Wolfgang Gartner & Tom Staar
    Is there a way to fix this in iTunes 12 Windows 8.1? If so please say so. If NOT please so as well! If you don't fullly please ASK! Thank you!

    Make sure the headset is plugged all the way in. It is a very tight fit, the plastic on the headset jack should be flush with the body of the Nano.

  • My ipod nano 7th generation won't sync ratings to itunes. What can I do?

    Hi,
    I have an Ipod nano 7th generation bought about a month ago and usually has no problems.
    I've been having an issue with it where it won't sync songs' ratings from the Nano to Itunes. My Ipod is set to manually manage Music and Video. And no ratings are added to the Itunes Music library when I press sync.
    Can anyone help me solve this problem?
    Thank-you.

    This is literally driving me crazy.
    I spend days, or more likely months rating my itunes library.
    I was happy to get this new ipod as it would permit me to finish rating my songs, as I used to with my old ipods.
    Its only about 3 weeks after buying this new ipod do i realize that it is randomly changing song ratings. It has therefore changed all the ratings i painstakingly had made. After trying many different ways to find out where the problem was coming from, I even did the drastic move of unrating all my songs, both on the ipod and itunes. Sure enough, when i plugged it back in to sync it, it was giving me new random ratings for about 40 songs, even though they had previously been totally blank.
    I'm extremely surprised I can't find any information about this. This bug has killed all the work I had spent trying to organize my library, and leaves me feeling quite disgusted.
    edit:
    There seems to be an all around problem with this new ipod. It isn't showing the play count for songs I know i listened to, and it's adding random songs in my top 25 most played that i never listened to.
    An answer would be very nice.

  • Ipod nano 7th generation is playing but I cannot hear the music

    I have a 16 gb  ipod nano 7th generation.  I've followed all the instructions in syncing and all seems fine except I cannot hear the music through the earbuds, even though the ipod shows it is playing.  What am I doing wrong?
    Thanks shielafromgresham

    Hi shielafromgresham,
    Welcome to the Apple Support Communities!
    If you are not getting any sound from your headphones on your iPod nano, I suggest reading over the information in the following article. Along with the information in the Acoustics section of the article, make sure the headphone jack is pushed completely into the headphone jack.
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Acoustics
    Follow these steps if there's no sound coming from your headphones.*
    Verify that the headset is plugged in to the iPod .
    Check the volume setting.
    Try adjusting the volume by pressing the volume buttons.
    Try another song or audio file.
    Try another headset.
    Reset iPod by holding down the Sleep/Wake button and Home buttons until you see the Apple logo appear.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Have a great day,
    Joe

Maybe you are looking for

  • How do i create a new category in iBooks

    When I select the Categories view in iBooks for Mac OS X I can see several categories listed in the left pane of the window. How do I create a new category, and how do I move a PDF file into the new category, or any existing category?

  • Use of synchronized keyword with portal services

    Hi, Can you confirm me if it is true that a portal service is a Singleton? I mean, when using an instance variable of a portal service I am able to set the value of the instance variable using one client app and get it afterwards using another client

  • Add pictures to my gallery

    I just got a replacement phone, how to I add pictures to my Samsung galaxy s4 gallery from the Verizon cloud?

  • MPEG Streamclip on Lion?

    Guys, tearing my hair out hear. I need to rip a project from DVD I did a while back. But every time I try to Export the VS file to Quicktime I get the following message "Error: Can't Create The MOV File". I'm using the latest version of Lion on an In

  • APDU: response code 6881 ?

    Dear all, I have implemented a (quite simple) APDU interface to receive an APDU and send back the response. The code is according to java card examples and it worked very well for a couple of times. However, the card is now giving me the status code