Ipod nano 7th generation USB error in honda civic 2013

I bought an iPod Nano specifically to use in my 2013 Honda Civic Hybrid.  It is 7th generation and using firmware 1.0.3.  Some days it will work for quite a while, other times is cuts out after only a minute or two with an error message about the USB.  Honda has been aware of the issue since April of 2014 and says it is a firmware issue and it has been reported to Apple.   It only seems to be an issue with 2012-2013 Civics and 2012-2014 CR-V.
The only way around it is to shut off the car and restart it.  Restarting the Nano won't work.  I just checked tonight to see if there is a firmware update.  There is not.  I wonder if anyone else is having this trouble and what you have done to work around it. 

Since you were able to call, I poked around too and found a place where I could call.  If enough people actually call them, maybe they'll finally get on the stick and fix it!  The service rep also told me about a feedback site and said that people higher up in the company do read the feedback messages so I went there and left one as well. http://www.apple.com/feedback/
She didn't seem to have any information on this issue either and said she was not aware of any plans to update the Nano firmware.  I hope she is wrong or the feedback I left will help.  If you go it too, maybe someone will do something.  Anyone with this problem - please go to the feedback site and leave a message about it!  Thanks.

Similar Messages

  • Ipod nano 7th generation usb problem

    New iPod nano 7th generation not being recognized when USB plugged in. Not showing a new device or anything.  Have uninstalled/installed iTunes7.  USBs working with other devices including iPhone4S.  Using Windows 7 Home version with all updates.  Have rebooted several times.  No other USB devices plugged in while connecting new nano.  Tried on another machine with Windows 7 Professional with same results - not working.  Any suggestions?  What am I missing?  Any new drivers for 7th generation?  Did see OS 1.01 already available for nano, but cannot download until PC and iTunes recognize the device.  Thanks.

    I figured out the problem.  Very simple, but overlooked at first.  It was the cable that came with the iPod nano.  I plugged it into an outlet using my iPhone cube charger, then connected my nano.  It would not recharge the nano.  Went to the Apple store and exchanged it for one that charged the nano while there.  When i plugged the new one into the PC it recognized the nano, opened iTunes and walked me thru the usual setup.  Synced with no problems.
    So check your cord.

  • IPod Nano 7th generation USB port unrecognised on windows 7 - help tried everything I could find

    Please help have been given an ipod nano 7th generation but cannot get it to work, downloaded latest itunes software, done all microsoft updates, restarted numerous times, have tried others suggestions online, nothing working.  The usb port works with other usb devices so no idea why won't recognise ipod.  Do I give up and try and get a replacement ipod?

    downloaded latest itunes software
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Ipod nano 7th generation shows error message that computer does not reconise ipod uninstall itunes try again. i have done this many times now

    ive tried uninstalling itunes and re installing many times and my ipod th generation still says cannot be reconised ? someone please help

    ive tried uninstalling itunes and re installing many times
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components (Apple Mobile Device Support, Apple Application Support, etc ...) and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Connecting ipod nano 7th generation through car stereo usb cord.

    When I connect my ipod nano 7th generation to my car stereo through a usb cable, (using a lightning adapter),  I am not able to control my music through the ipod, but only through the car stereo system. The car stereo system won't allow me to play my playlist on shuffle mode nor can I control the ipod itself through the device when it's plugged in. I have to unplug it and make new playlist selections. Any solutions?

    I am having the same problem with mine.  I have a Hyundai Sonota and can pair with my Ipod Nano but cannot connect.  I also would appreciate any help.  Thanks!!

  • Ipod Nano 7th Generation Car Radio Controls via USB Cable.

    When I use my USB connection in my Hyundai for my ipod nano 7th generation, instead of playing what it was playing when I plugged it in, as it did with my previous nano, it plays random songs and I cannot navigate to podcasts I want to listen to as the navigation is clumsy and displays file names which are meaningless to me. How do I get it to play what I want to in my car?

    It does not matter, as i stated this happened to me doing both. Currently I am using it now with the car, I got a newer car last week. But I think when I get out of the car it pauses anyways. I have noticed that if pauses I don't touch it, it stays on the same song for maybe 1 day.
    If I don't use car for 3-4 days, it starts over again. That shouldn't matter though, if I did turn it off? I need help.......

  • Windows can't find driver for ipod nano 7th generation

    I just got the IPod Nano 7th generation.  When I plugged I in the computer will pick up the apple mobile storage device usb driver, but I get an error for the iPod saying that no driver was found.  I have tried connecting to different usb ports and also tried uninstalling anything related to the iPod or iTunes.  So, any help would be appreciated.

    Ok I fixed the problem I had.  I went under device manager and right-clicked the ipod icon, and told it to update the driver.  For the update though I didn't use the automatic search.  I told it to search in the location  (windows/winsxs) and it found the driver.  I hope this helps somebody else.
    Since I didn't mention it earlier I have Windows 7 64-bit.

  • Can i use my new ipod nano 7th generation on my macbook pro

    I registered my new ipod nano 7th generation on my macbook pro.  While on my macbook, I tried to download wma audiobooks from the library using overdrive media console & its not working.....so, I decided to use my windows laptop.  I have the latest version of itunes on both laptops.  (I know I can download & transfer wma audiobooks to my shuffle using overdrive media console & windows laptop.)  I'm getting an error message that says I have to reformat my nano if I want to download wma audiobooks.  Can I use my nano on macbook pro & windows laptop?  will I ever be able to download wma audiobooks to my nano using macbook? 

    Your iPod Nano will need to be restored in iTunes on the Windows laptop before you can start adding/syncing content over to it.
    Or if you want to use it with OverDrive on the Mac, you'll need to download the books as MP3s as WMA is not supported.
    B-rock

  • Ipod Nano 7th generation not recognized by computer or iTunes

    Neither my computer nor ITunes recognizes my Ipod nano 7th generation. It was working fine until I ran an intensive AVG PC tuneup on the laptop. Device manager recognizes the Ipod and says it is working correctly. I have done all suggested troubleshooting and nothing has yet worked. Additional suggestions or info I should provide?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Ipod Nano 7th Generation is saying Use Itunes to Restore. Itunes no longer recognizes my device

    Please Help, My Ipod nano 7th generation was syncing. When I disconnected from my computer, I no longer had any music on it. When I plugged it back in Itunes prompted me to restore my Ipod. I went ahead and restored it, but it kept asking me to restore. When I unplugged my ipod, I got a white screen saying Use Itunes to Restore. Problem is Itunes no longer picks up my device. I've tried plugging it into different USB ports, I've tried to update Itunes to the newest version, and uninstalled and reinstalled itunes. I've tried to reset the ipod, but it still goes back to the white screen saying "Use Itunes to Restore". I've been trying everything. Please Help.
    Thanks

    No. You need iTunes on a computer to restore it.  If you don't have iTunes you can download it from here:
    http://www.apple.com/itunes/download/
    If you don't have a computer, can you can try to borrow one with iTunes installed.

  • My iPod Nano 7th generation is not detected in Itunes

    Hey there,
    I have a iPod Nano 7th generation and I'm working with a Windows 7 64-bit version.
    So when I got my iPod, I installed iTunes and everything went very well..
    but today I tried to sync my iPod and it is not even detected from my iTunes or my computer.
    I had the error -42110, but I found the solution on here, but it didn't work either.
    I went through a lot of questions on here, but I couldn't find any solution for my problem
    Has anyone got any idea?

    well actually I did connect my iPod 3 days later or so to my charger, because a friend of mine asked me if I'm sure that the cable is not broken. So I connected it and it charged, when I thought "Well let's try on the computer again". I plugged it in and it was detected again.. so uhm I don't really know why it did not worked the last times.
    So maybe try to restart your computer and turn off an on again the device and try it later on again.. maybe it will work then:)
    I'm sorry I can't help more!

  • ITunes doesn't recognize IPod Nano 7th Generation

    ITunes doesn't recognize my IPod Nano 7th Generation. I get a message saying "An IPod has been detected but could not be identified properly". My Windows 7 computer shows the IPod Nano as a removable drive until I launch ITunes at which point it disappears from the list of removable drives. I even disabled my security software (Norton 360 but not Spybot S & D) and it didn't solve the problem. Any suggestions..............Thanks

    Hello Aruniem,
    The article linked below provdies information and steps that can help resolve this issue.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

  • IPod Nano 7th Generation will not turn on

    My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
    All songs on the device have disappeared.
    Shows in iTunes - even shows as having a fully charged battery.
    Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
    Have changed USB ports, from computer to AC powered USB charging station.
    Help?

    Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me

  • My ipod nano 7th generation is stuck in a restore loop with a white screen. Now it won't turn on anymore. What to do?

    My new Ipod Nano 7th generation is stuck in a restore loop. Here is what happened: I added music to it using the latest version of iTunes, the colored bar at the bottom of the summary tab in iTunes showed my that I added it and I disconnected it to listen to the music. As I turned it on, it told me that there is neither music nor pictures on it. So I connected it again to my computer and iTunes told me that I had to restore. Which I did following all the steps but it keep telling me that I need to restore it. After three times of restore it, I disconnected it from my PC and turned it off. Now it won't turn on anymore - even though the battery is fully charged - and when I connect it to iTunes, iTunes tell me "The iPod software updater could not be contacted. The server does not support this version of iTunes." Well, I just downloaded the newest version a couple of minutes ago from the apple website. My iPod stays black. What shall I do?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

Maybe you are looking for

  • Choosing between 720p and 1080p on Mini connected to Sony HDTV (1920x1080)

    I have a late 2009 Mac Mini and a SONY HDTV and had no difficulties at all in hooking them up. I just connected the Mini Display Port to DVI connector which ships with the MAC Mini to a Belkin DVI to HDMI cable (also available from Apple Store) and c

  • Sound Hiccups

    i just recently bought a p500 series i believe. its the big 18.5 inch one. every couple hours or so the sound seems to freeze for about two or three seconds and then resume. its kinda weird. its like a hiccup. it happens when im playing itunes. reall

  • How to boot from USB flash drive - Portege R500

    Hi, I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sortin

  • Inconsistencies during role update

    Hello Gurus, Scenario: When custom tcodes are added to an existing role and the profile re-generated, the change documents shows deletion of some other Auth Objs from the same role. We found that, upon the addition of the custom tcode, ACTVT 01 was r

  • Iphoto repeatedly crashes

    Hello! I am having a problem with iPhoto repeatedly crashing. It had been working just fine, but today, while editing a photo, it crashed. Since then, it will open briefly, but then quickly become unresponsive and crash within about 30-45 seconds. I