Ipod Nano 7th Generation with thin green, dark blue and light blue lines on the screen?

I have an Ipod Nano 7th Generation. It was brand new about a year ago, but roughly 5 months in the screen had a single dark blue line running down the screen, this has now developed into 4 light blue lines running horizontally and another green line running vertically.
I think it may be something to do with the pixels and the screen - something to do with the fact that they display red, green and blue colors?
I have restarted the ipod but to no avail. I have tried getting into the system settings as well but cannot seem to manage to access them.
Any help?

Take it to the Apple Store to get it fixed.

Similar Messages

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • I have my ipod nano 6th gen. I cannot sync it, and this message appeared to the screen. " The ipod cannot be synced. The required folder cannot be found." how is it? Please help to fix this. thanks

    How to fix my newly acquired ipod nano 6th gen? i cannot sync it because it always appear to my screen that it cannot be synced. the required folder cannot be found? how is it?

    Is your iPod configured to sync photos?  If so, try disabling the syncing of photos and see if the error message goes away.
    Anything change with your iTunes library since the last time the Nano was able to successfully sync?
    B-rock

  • Water damage iPod Nano 7th Generation?

    My iPod Nano 7th Generation was in very good condition and it just went through the washer 3 nights ago and I plugged it into the charger and it would turn on but the touch screen wouldn't open the music or anything and the screen looked like there was water in it and it went very slow. How can I fix it or something? I cant buy a new one because it would be too high price and I can't get one either because Im 1 year away from being able to have a job. So how can I fix this or something?

    Well if it's just the screen i'd try eBay, but it sounds like it has internal damage because you mentioned it is slow. You either would have to replace everything inside, or buy a new or refurbished one.
    4

  • The screen on my ipod nano 7th generation went blank

    the screen on my ipod nano 7th generation went blank, I can do, and try to restore in Itunes, but it makes the restoration and nothing happens the screen remains blank.
    I can do that

    Hello eramosf,
    I would be concerned too if my iPod nano had a black screen.  I recommend following the steps below:
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    I got this information from the following article for the 6th generation iPod nano.  The steps are the same, except I updated the second step with the reset for the 7th generation iPod nano:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My ipod nano 7th generation won't sync ratings to itunes. What can I do?

    Hi,
    I have an Ipod nano 7th generation bought about a month ago and usually has no problems.
    I've been having an issue with it where it won't sync songs' ratings from the Nano to Itunes. My Ipod is set to manually manage Music and Video. And no ratings are added to the Itunes Music library when I press sync.
    Can anyone help me solve this problem?
    Thank-you.

    This is literally driving me crazy.
    I spend days, or more likely months rating my itunes library.
    I was happy to get this new ipod as it would permit me to finish rating my songs, as I used to with my old ipods.
    Its only about 3 weeks after buying this new ipod do i realize that it is randomly changing song ratings. It has therefore changed all the ratings i painstakingly had made. After trying many different ways to find out where the problem was coming from, I even did the drastic move of unrating all my songs, both on the ipod and itunes. Sure enough, when i plugged it back in to sync it, it was giving me new random ratings for about 40 songs, even though they had previously been totally blank.
    I'm extremely surprised I can't find any information about this. This bug has killed all the work I had spent trying to organize my library, and leaves me feeling quite disgusted.
    edit:
    There seems to be an all around problem with this new ipod. It isn't showing the play count for songs I know i listened to, and it's adding random songs in my top 25 most played that i never listened to.
    An answer would be very nice.

  • Ipod nano 7th gen with remote control and with or witthout dock

    Hello there!
    First of all thank you for reading me
    I need to use my ipod nano 7th generation with the remote control because I'm installing it in my new ballet school and it's very uncomfortable going every time near the stereo to control it. I've always connected the ipod with the cable, not with the dock and I was wondering: can I use the apple remote controller without the dock? if no, has the dock to be apple or is it the same? I've seen that the apple universal dock has the old connection (like iphone 4, just to understand) .. How can I connect my ipod 7th gen? is there any adapter or something coming with the dock?
    Thank you very much,
    Anna

    Ok I've found out that the universal dock is no longer available and that, btw, is not working with ipod nano 7th.... how should I do then?

  • I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • Ipod Nano 7th generation touch interface is now screwed with due to apple update.

    Hi, I recently purchased a new laptop switching over from a macbook pro 2010 of which the logicboard died. In this newly configured windows 7 64 bit laptop I downloaded the latest itunes. I then connected my ipod nano 7th generation to it and it requested to format it since it was formatted for a mac. I did so and restored my ipod nano 7th generation. After this however my previously perfectly working nano touch interface (swiping, touch to select) is now completely messed up. This has to be due to the formatting and/or the new nano update or itunes update from apple. I can't even swipe to the right or left to move between screen interfaces on my nano anymore. As well the touch icons require double taps and have rectangular white selection boxes over each icon (NOT NORMAL)
    Overall I am very displeased and want apple to fix this with either a new firmware nano 7th generation update or apple itunes update for windows 7 64bit. I'm thinking of buying a replacement iphone 4 but now that this issue is prevalent how can I TRUST Apple that nothing wrong will occur with connecting a new iphone 4 to my itunes on a windows 7 64 bit PC.
    I am NOT the only one with this issue as you can check out for yourself: http://answers.yahoo.com/question/index?qid=20130727205241AAOmiuC
    REASON FOR POSTING THIS HERE: I want more exposure to this issue. I couldn't get access to customer support since my ipod nano 7th generation is over a year old. This is cruel but whatever, Apple does what it wants and I will post this here to do what I want. Gain exposure to this defect that clearly Apple is not addressing since the above link displays a user with the same issue and posted the problem 3 months ago.
    DO SOMETHING ABOUT THIS APPLE

    Hi ImAMinion.
    Very good question. I should have explained that part. VoiceOver changes how the navigation functions so it's a little tricky.
    From the home screen I got to settings by swiping up and down instead of the normal left and right.
    To open settings I first tapped once on the settings icon so that the box appeared around the icon. Then I double tapped the icon to open it.
    I repeated the "tap once to get the box then double tap to open" process to navigate through the settings menu. Navigate to: Settings -> General -> Accessibility -> VoiceOver -> set to off. Once it's off the navigation will return to normal.
    Hope that helps.

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • Just recieved ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes

    Just recieved a brand new replacement ipod nano 7th generation and when plugged in to computer it is not registering on computer or with itunes, I have tried resetting ipod. I have uninstalled itunes and reinstalled itunes. I have tried various cables and know they are compatible for charging the ipod, what else could it be?
    Darlene

    Hi Darleneann8,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod nano not being recognized on your PC:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    I hope this information helps ....
    - Judy

  • Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

    Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac? 
    Thanks to your feedback.

    Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
    (74380)

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • HT1339 my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

    my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

    In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
    So, you disconnect it from power, and it almost immediately goes dead?  You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
    You should probably have it looked by Apple Tech Support.  If there's an Apple Store nearby, you can take it to the store's Genius Bar.  To avoid waiting, you can make a reservation at the store's web page
    http://www.apple.com/retail/

Maybe you are looking for

  • Iphoto library and time machine backup on a same drive ?

    Hi I want to free up some space on my MBP so I am planning to move my iphoto library from MBP to an external hard drive. Can I also use the same external drive to keep Time Machine backups ? In short if I buy a large size external drive can I use it

  • Dynamic Discovery problem; does not read my dynamicloads changes

    I created a PEI based on IUserProfileActions. I added the appropriate <class name="My.Custom.AssemblyName"/> to the C:\bea\alui\settings\portal\dynamicloads\PEIs\UserProfileActions.xml and dynamic discovery is not picking up the change. I've restarte

  • Growing file import and refresh issues

    1) With files generated by our own MOV/op1a writers, we get different results with different wappers, different OS platforms and versions, and different storage filesystems, both using CC 7.1 and CS6.05  Quicktime files on the Mac, OS 10.7.5 to a Sam

  • Feature Request - Way to organise connections

    My job requires that I connect to a large number of user/instance combinations spread accross dev/test/prod environments. It would be really nice if I could organize my database connections into a hierarchy of sorts. One way might be the ability to c

  • 43R8770 Port Replicator and network connection

    I have a 43R8770 port replicator that I'm connecting to an SL500 Thinkpad running XP Pro sp2. Everything seems to be working correctly except the USB network adapter. Neither light on the adapter wll come on when it's plugged in and connected to the