Ipod nano 7th headphone issues

I pod nano 7th when put the in ear headphones RHA approved apple  headphones in  cant hear anything but the nano plays the music track
So then push jack in with force  music heard but it slips down to default and music unheard again, it has to be pushed in hard in order to hear music which
is far from ideal.
   When try another pair apple headphones that arent in ear they work as they sit flush with the player but when rotate the jack music stops and they are for a shuffle not nano
  Pacifically brought a pair of in hear ones as I cant  use the conventional kind as they fall out of ear now tried four pairs including the padded ear kind
     What can possibly try these arent cheap headphones and the player is only a year old, but not covered under warranty.
   Tried to put it to factory settings restore it same thing.

If it is only happening when you connect it using the Lightning cable I would guess you have a bad cable.

Similar Messages

  • Ipod Nano 7th Gen Issues

    Ipod Nano constantly restarts when i plug it in and will not turn on. All it shows is the apple logo then turns black and shows the logo again. Any help would be much appreciated.

    If it is only happening when you connect it using the Lightning cable I would guess you have a bad cable.

  • HT1363 Using iPod nano 7th gen with Bitlocker

    Hi guys,
    Quick question on using iPods on Windows machines that have Bitlocker enabled - how do i prevent the iPod from showing up as a removable drive? I have disabled disk usage in iTunes but no luck. The problem is that Bitlocker is trying to encrypt the iPod, which renders it unusable anywhere else
    Strange thing is that the behaviour seems to vary between iPods, i have:
    -iPod Classic 5th Gen - issues
    -iPod Touch - no issues, works like a charm
    -iPod Nano 7th Gen - issues
    On the same machine my iPad 2 work without issues.
    Thank you in advance for the help
    Regards,

    You would need to make a change in that software. Try for help on their website.

  • IPOD NANO 7TH GEN AUDIO ISSUE

    Hi ,
    I bought a Ipod Nano 7th Gen sep last year . For last few days audio quality has been reduced a bit i.e Clarity is missing , Bits are not so powerful .
    Kindly help what to do .
    I already reset the same twice but not getting any result .
    Thanks
    GS
    9051185601

    @ Watanabe Thanks boss , but I checked the same with out any result and pls note I use "ROCK" in the "EQ" setting .
    Hope there s not any issues with hardware .
    Could you please advice some better headphone for my Nano .
    Thanks for your support .
    GS

  • No sound through headphones on new iPod Nano 7th. Latest software version has been downloaded and music has been synced from library.

    No sound coming through headphones on new iPod nano 7th.  Music has been synced from library, and latest software downloaded.

    hi there,
    it sounds like you have just defective speakers ( or connector issue ). better to contact support for replacement.

  • I recently purchased a bluetooth headphone set that I have been able to pair to my iphone6 , but it is not showing up on my ipod nano 7th gen, anyone else had a similar problem ?

    anyone had trouble syncing a bluetooth headset to an ipod nano 7th gen ? I was able to sync to my iphone6 , but no luck with the ipod, even after a reset & several attempts

    THanks for the suggestion deggie , but I have already tried this without any success. I just mentioned pairing it to prove that the headphones weren't defective. I also tried reaeting the ipod through itunes hoping that might help , but still no detection on the ipod

  • Is there a way to listen to radio on iPod nano 7th gen with Bluetooth headphones?

    I know the iPod nano 7th gen uses the headphones as an antenna. I know there will need to be some sort of antenna attached. Does anybody know if there is an antenna on the market that can be plugged into the headphone jack that will allow audio to be sent to a pair of Bluetooth headphones?

    There is currently no such antenna available.
    B-rock

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • IPod nano 7th gen (brand new) doesn't recognize Headphones

    I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
    This is what happens:
    When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
    When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
    When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
    I have also restored the device in iTunes, and updated with no luck.....
    Thanks in advance for any useful answer!
    iPod nano

    First, make sure the headphones plug is completely inserted into the nano's headphones jack.  It should "click" into place.  The fit may be tighter than expected, especially when new.  There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
    If that is not the problem, you should have the nano looked at under warranty.  It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

  • Why won't my BRAND NEW iPod Nano 7th Generation recognize headphones?

    My BRAND NEW iPod Nano 7th Generation (purchased from and Apple Store less than a week ago) will not recognize any headphones.  Consequently, I can hear NO sounds.  It worked just fine right after I set it up. I turned it off, disconnected headphones that came with the Nano. Several hours later I turned it on again, plugged in the headphones, and then I could hear NOTHING. When I tried the radio, I got the message there was no signal because it said the headphones were not plugged in, which they were.  I have tried two other sets of headphones.  None work, but they all work in another iPod, so I know it is not the headphones. I restored the software and started over, but this didn't help either.  I have pushed the headphone jack in as far as possible. This is very frustating because this Nano was a birthday gift for my husband.   I will be grateful for any help.  Thanks a lot.

    Thanks SO much for the GREAT advice!  I did just what you said, and I am back in business.  The sound is fine, and the radio works. I cleaned out the jack with a tooth pick, blew some air in, and pushed the jack in a bit harder.I guess I was too tentative about pushing the jack all the way in. You were right that it is a tight fit.  Thanks again, deggie.  My husband thanks you also! His birthday gift now works!  Yay!

  • Ipod nano 7th generation Headphones jack dented :(

    ipod nano 7th generation Headphones jack dented help? how much does it cost to un-dent it? is it even possible? I can't put my headphones in. :((

    This is rediculasly common for this device. Hopefully Apple gets the design right next time around by moving the earphone jack ever so slightly towards the center.
    Anyway, are there any suggustions for moving it back properly yourself?

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • My ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

    my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

    Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • Ipod nano 7th gen sync issue

    I have just bought a new ipod nano 7th gen and am having issues with syncing it to my PC.  On my devices the ipod is there and recognised as such, but in iTunes the ipod doesn't exist at all.  I have the latest version of iTunes but can't find a way to access the iPod at all - any ideas?
    The iPod is recognised on the family laptop (macbook), but not the PC.  The issue is that there is some music on the PC that's not on the laptop and so would be helpful to access it via the PC and not just the macbook.

    If the video is HD, the resolution is too high for the iPod's screen, so iTunes will not sync the video.
    If this is a purchase from the iTunes Store, and you paid for the HD version, you may be entitled to also download the SD version (at no cost), which should sync to the iPod.
    FYI - There is a command in iTunes to create a new version of the video, which should sync to iPods
    menu bar -> File -> Create New Version -> Create iPod or iPhone Version
    However, videos purchased from the iTunes Store (such as movies and TV shows) have copy protection, so that command is disabled.

  • When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

Maybe you are looking for