IPOD NANO 8gb Black WONT WORK OUT OF HOLD

i got the 8 gb nano black for christmas 2006
One day i was trying 2 turn it on but it wouldnt work
i plugged it into both into wall charger and into my pc but nothing was responsive. I turned the hold switch on and it responded a black screen with the apple logo came up and it went into the main mnu screen. So i turned off the hold to start listening to music but as soon i took the ipod off hold the screen distorted and didnt repond again.
Ive tried everthing (It wont even reset)
i also tried restoring it but the same problem persists after restoring:(
Please help..would be greatly appreciated
  Windows XP  

No. There is one in Red and one in Black only (both of which I have). Always be careful of ebay sellers when it comes to iPods because there have been several fake iPod sellers.

Similar Messages

  • Which type of vedio suport, which type of vedio suport Apple iPod Nano 8GB Black 4th Gen  Metallic MB754

    which type of vedio suport, which type of vedio suport Apple iPod Nano 8GB Black 4th Gen  Metallic MB754

    According to this article: iPod nano (4th generation) - Technical Specifications
    Video
    H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    B-rock

  • My Ipod nano power button wont work while headset are in, how do i fix it?

    Hello, I got myself a iPod nano 6th gen. and I'm already having  problems with it.  I got it from ebay and it was working all good, expect  one day the power/sleep button just stop working when the headset are plugged in.
    so this is how I can somewhat make it  work on it but it still stinks to work with it like this.  When I have  no head set plug in, it works all fine.  The power/sleep button is okay,  the volume button is okay, and the touch screen is okay, but once I  plug the headset set in, if shut off after 1 second, and cant turn it  back on, then if i plug my power cable in then I can use the touch  screes, but the power/sleep button doesn't work as well the volume  buttons.  Now if I do a soft reset with the power button and down volume  and get the apple logo on, I can quickly get the headset plug in and  play the music with out the power cable in, but still cant use the  button at all.   Also when I have it plug in to the power cable then plug  in the headset, it shut off until I replug in the power cable or remove the headset to turn it back on.
    How  can I fix this?  I tried the factory reset through iTunes, and it  didn't help.  I try the diagnostic and that didn't help.  Should I just  send it in and pay for the repair cost or what?

    The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
    If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an Apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

  • My ipod nano 6th generation wont work anymore and i dont have a recipt to return it

    my ipod nano 6th generation started out with nothing wrong with it after a few months i relized it wasnt hold much energy but a few months later it wouldnt even start up i did everything support told me to do i even called apple but now i wanna get it fixed but i threw away the recipt what should i do

    Check your warranty status here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If you are still covered either continue there to send it in or make a Genius Bar appointment at your nearest Apple Store. You do not need the receipt.

  • Ipod nano will not wont work or connect to itunes

    I just purchased a nano and it will not connect to itunes it has a folder and caution sign on the ipod and when you go to update ipod it says it can't be updated

    try restarting your computer. and make sure your nano is unplugged and everything. you may have to download a new version of itunes too. jus see if that works, it helped mine. hope it works for you!

  • Ipod nano 4th gen wont work??

    when i connect it it to my computer my computer wont recognize it and it wont appear in the itunes list. i went to use it today it was fine then half way through a song it shut off to a black screen with light blue glow.i tried the 5 rs but it wont even turn on! this was less than 3 days after buying it can it be fixed or did i waste money?

    Mine did the same thing. One minute it was working fine the next thing I know the screen is black and no response no matter what I do or try. It's currently plugged in and still nothing. Anyone know what caused this?
    Message was edited by: NdnHlp

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • My ipod nano 6th gen wont charge, turn on or respond to anything i have done i have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it any tips would be much apriciated! thanks

    My ipod nano 6th gen wont charge, turn on or respond to anything i have done. I have tried the troubleshooting and nothing works. I have droped it once but it work for about a month after and i havent wet it. any tips would be much apriciated! thanks

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • 5g ipod nano 8GB no sound through ear buds or headphone jack only when docked.

    5g ipod nano 8GB no sound through ear buds or headphone jack only when docked. any suggestions? i don't want to replace any of the parts inside if at all possible.
    I have a 5th generation 8GB iPod nano. I bout it off of eBay in May of 2010 and it has worked great until now (Apr 2011). The 5th gen plays music through the headphone jack even when no ear buds are plugged in. I was using it one day and it just stopped. I tried resetting it manually and automatically and I tried reinstalling iTunes. Nothing has worked. Now it won't even play sound though the ear buds (or the aux hook up in my car), only when it is docked to my iHome. Does anyone have any suggestions? I dont want to replace the iPod or any parts inside if at all possible. ANY SUGGESTIONS ARE WELCOMED! THANKS!

    Headphone jacks are only good for so many in and out usages.  Usually its the headphone jack itsefl that goes bad first but sometimes it is the internal part.  If you are lucky you can clean out the inside and get it to work.
    These devices are not made to last for someone who actually has those headphones around there neck and acually uses there listening devices through out the day plugging it in and out.  This is not in any way an Apple thing, it is a problem with many devices.  The male ends tend to get dirty hanging around then scratch the female end when used.  In fact, using higher end headphones you can really notice even the smallest particles of dust on the male end of plug when used, that is the small popping you might notice when the cord moves.
    Hopefully its a problem on the male side of things. 
    I would recommend a person that wants to use headphones alot to keep a small 2 inch extension plugged into there device that can be replaced when it goes bad inplace of wearing out the original plug.
    Again, this is not an Apple problem alone.

  • Can't find drivers for ipod nano 8GB for windows vista HELP

    I am trying to find the drivers for my ipod nano 8GB. I am running Windows Vista on my laptop. I have tried absolutely everything listed on this webpage and others. I have removed itunes and reinstalled it and still nothing. I downloaded usbstor.sys and usbstor.inf. I have gone into my computer and clicked on the ! next to my ipod in file manager and have gotten nowhere! This has been 5 days of frustration. I don't understand why apple would not just SUPPLY the software for the nano. I am beyond frustrated now. Can someone please help...

    Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
    I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
    Good luck!

  • IPod Nano 8gb problems with iTunes/iMac

    Bought a brand new iPod Nano 8gb last night. I am trying to use it on an iMac G4 1 gigahertz with OSX 10.4. This computer is not online. I downloaded itunes 7.0.1 from a neighbors computer and installed it on my imac and it seems to work fine. I can hook up the Nano to the iMac with no problem. Itunes recognizes the Nano and seems fine UNTIL I click anywhere in the itunes window woth the Nano plugged in, at which point itunes disappears from my screen. I can relaunch it, but the same thing happens again. Itunes works fine without the Nano plugged in, but not with the Nano.
    I called Apple Support, and was told I HAVE to be online to use both itunes and the new Nano I am online at work on a PC, but don't have internet access at home. I have no desire to download songs online, or do anything else online at home, I just want to be able to put my own existing CD's on my Nano to listen to away from home.
    Any ideas? Do I HAVE to be online to use iTunes 7 and the new Nano?

    I guess I'd better clarify this for my own sake. By "update" are you referring to changing music, folders, artists, etc? In which case, I realize that I would need to update my Nano to reflect any changes I make to my music files. If by "update" you are referring to making a software or firmware change through an internet connection, then I would think this would be a rare occurrence that could be done at a friends computer.
    The Apple "help" person on the phone said that I couldn't even USE my Nano without being online. Period. That the new Nano and new versions of iTunes REQUIRED an internet connection to function properly.
    At the Apple authorized dealer where I bought the Nano, they said there is no need at all to be online, as long as I have the proper versions of everything (OS, iTunes, etc) installed, it should work fine, there is no need for an internet connection. (Unless I want to actually download songs, of course) They have burned a CD for me with the required updates they feel I will need, which I will install later this evening. Hopefully that will work.
    It makes no sense to me that I would be REQUIRED to be connected to the internet in order for the Nano to simply be able to playback songs I have stored on my iMac, as I was told by the Apple help person the phone. He made NO effort to help at all, saying repeatedly that as long as I was not "online" with my iMac, the Nano and iTunes would not work, saying "What part of this don't you understand?"
    Then he hung up.

  • What causes my Nano to loose my work out info when I push pause on earphones?

    What causes my Nano to loose my work out info when I push pause on earphones? Although I am shoowing previous workout history, using Nike+.

    It just happened to my 4GB nano too and I reset it (Menu + Select) a couple of times (okay, about five times or so) with no luck. I hooked it up to a Mac to see if that would do the trick and still the same problem.
    Until today, my nano's been running great (it doesn't even scratch easily [I own a black one]) and I have the latest firmware on it too. I'm thinking it must have something to do with my having recently: 1) changed the name of my nano (through iTunes 6.0.1) 2) it's almost filled to capacity (40MB free) with data from iCal, Address Book and iPhoto, 3) I just upgraded to iTunes 6.0.1. [...]
    I'll try to connect and sync it to my Mac again tomorrow and if that doesn't do the trick it looks like I'll have to do a restore on my nano.
    Oh, and I also tried taking "Music" off of my main menu and putting it back on with no luck. Since this problem is only with the "Music" menu for my nano, if I'm on the road I can always put "Artists" or "Playlists" in my main menu as a temporary fix to get to my music collection.

  • My ipod nano 1g is not working, it will be replaced?

    my ipod nano 1g is not working, it will be replaced?

    It may be a hardware failure, but see this: iOS: Wi-Fi settings grayed out or dim - Apple Support

  • My apple is not recognizing my ipod nano G4, has always worked in the past. Need to charge it, but it won't charge. please help. have read troubleshooting, checked connectionsp

    my mac doesnt recognize my ipod nano G4, its always worked before. read the trouble shoots, checked all connections. it needs to charge and wont do it.

    Try the suggestions in article - iPod not recognized in iTunes and Mac desktop.  If the suggestions do not work, more than likely you need a new battery.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • Ipod Nano 8gb

    I just purcahsed a Ipod Nano 8gb. Had no problem hooking it up to my computer. My problem is downloading the Itunes software I have been online now since 4pm trying to download this software I have only recieved 43.3 MB so far it is getting really frustrating. I do not know if the problem is because I have dial up service or not. My daughter is not going to be happy when she gets up and finds out I haven't gotten any songs downloaded to her new Ipod. Please need help!!!!!
    Message was edited by: Celeste Rimbey

    ehm i think it's your isp's fault it is taking so long, not the ipod's. =)
    and a dial-up connection ***** big time. it will take you forever to d/l files...go dsl.

Maybe you are looking for

  • How do I set Adobe Flash Player as the default program to open SWF files?

    Basic Overview I have this working fine at my home laptop, however I need this working for projects at school. Whenever I want to open an SWF file at home, I simply double click it and open it in Adobe Flash Player (Adobe Flash Player 10.0 r22) and I

  • Macbook Silver display to vga doubler

    I have a Macbook silver and I bought a SIIG VGA 2 port video splitter and I cannot get the signal to carry through. I have an old macbook the white one and that works fine. I want to use the new macbook with a QIT 300 tablet and a projector at the sa

  • Mail Per User Quotas Not Working

    We just migrated from 10.9 server to the new 10.10 server and noticed that our per user mail quotas were no longer working.  If I change the Server app - Mail setting - to have a global mail quota on it work, however, we have a few accounts that we n

  • Installing Oracle 10g on Solaris 7

    Hi, Can I install Oracle 10g R2 on Solaris 9? I tried searching for the answer on various forums but could not find anything direct. Thanks in advance!!

  • Temporary checked out Files on Server TempFolder (Howto?)

    Hi Experts, Can Someone help me with customizing the Data Carrier Type for Checked out Dokuments in DMS? Temporary Documents should not be stored on Front End Client, but in a Folder on the Server. What can i do for reaching that? Thanks a lot!