IPod Nano and my hard drive won't work on my G3....Why!?!

Hey everyone.
I'm home from college, and I didn't want to take my iMac with me. Luckily, I have been using an older G3 iBook. It works fine, but when I tried to plug in my iPod Nano, it doesn't recognize it. I didn't bring my Nano install disk. Is there another way to get the computer to recognize the Nano?
Also, I brought my external Hard Drive home so I have my music collection with me. On my iMac, I have no problem. I plug it in via USB, and it works fine. But again, my G3 iBook doesn't recognize the external hard drive. Now...I'm stuck at home with no music....HELP!

If you have an older version of OS, then you will be unable to download the newest version of itunes. In that case, the best bet is to restore the ipod.

Similar Messages

  • HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

    My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
    After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
    Many Thanks

    The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
    tt2

  • I updated to maverick and now my toshiba hard drive won't work

    i updated to maverick and now my toshiba hard drive won't work

    shakejke wrote:
    i updated to maverick and now my toshiba hard drive won't work
    whats the format on the external HD?
    verify same on another Mac, its likely a dead SATA card inside the external enclosure.
    One assumes you arent referring to a 2012 Air with a Toshiba SSD, since the Air contains no hard drives, only a SSD.
    2013 Air use Sandisk or Samsung SSD.

  • Ipod nano as a hard drive?

    Can you use the Ipod nano as a hard disk on your computer like the other Ipods since it uses a flash drive?

    OF course it has FAT32 formatting and by going into Ipod preferences you can select to "enable disk use" and it should appear as a mounted drive in My Computer (for windows)

  • Ipod nano and Vista; no driver?

    New computer with Vista Home Premium... when connect ipod nano it says no drivers. Tried going to the net etc. no answers about where to get a driver to download. Can anyone help?

    Don't have Vista, but in reading other posts here they have said just tell it you don't have a disk and let Vista select and driver and load it. You can use the Search Discussions area to the right to learn more.

  • HT1353 how can i put music in an ipod nano with no hard drive only flash drive

    i have an ipod nano with flash drive and i dont know how to put music

    Do you have iTunes installed on your computer? Does the iPod nano come up in iTunes when you connect it?

  • HT1386 using iPod nano with new hard drive after original crashed

    My PC hard drive died. My iPod hasa bunch of music on it. I reloaded iTunes on my new drive. Now I can't load any music from iTunes to my iPod without erasing my current content. How do I fix this?

    Transfer iTunes purchases by:
    http://support.apple.com/kb/HT1848?viewlocale=en_USiTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer othre music by using a third-party program like one of those discussed here:
    Copy music
    - To retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note that the Backup that iTunes makes does not include synced media like apps and music.

  • IPod nano gen 4 forward button won't work, and the hold switch won't either.  I've tried restoring it and it didn't fix the problem. Any suggestions?

    The forward button won't work and the hold switch doesn't either.  I tried restoring it, but that didn't work.

    Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

  • When I connect my iPod Nano and it opens, it won't let me choose syn tunes from devices. I just bought a new Laptop PN, not MAC but I can't sync

    Syning in new Laptop PC

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

  • When my ipod is charging, the hard drive won't open.

    when my ipod is charging the hardrive or the pop-up only appears once after that it wont pop up...
    does anyone know why??
    It charges fine but the hardrive(pop-up) wont show
    IM FREAKING OUT!!!!!!!!!!
    Oh and does anyone know another way to put music onto ipod without itunes my itunes is currently not working...im new to this apple system

    If you mean that the iPod does not appear in iTunes on yur computer go here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Otherwise more clearly describe your problem.

  • Ipod and external Hard drive don't work together

    I got a dell optiplex gx260 which has 6 2.0 USB ports. My IPod (80GB classinc) library is stored on external HDD. When I connect my HDD to the comp and point iTunes to the HDD library everything is good and I see my songs. As soon as I connect iPod it shows up “unknown device” in a device manager. If I disconnect HDD and connect iPod only windows finds it OK, but as soon as I plug HDD back in iPod disappears. I’ve tried reinstalling sys and inf files, pointing towards updated drivers and all nothing still the same thing, tried every port and every combination on the computer USB ports still the same thing iPod and HDD don’t want to work together. Please advice, thanks.

    I got the same problem here but not just with IPod. When I power up my external disk (with aux power supply) my usb stick (or IPod or printer or scanner or other devices) on other ports get disconnected. All devices did work toghether some months ago.
    I think this is related to a hardware problem. Things began to fail, when I tried to co-supply 5V to a device connected to my usb bus. I possibly toasted some logic on the motherbord.
    Testing your hardware on a second system may help you. Or have a look if a USB stick instead of IPod gets disconnected too. This may prove that its not IPod related.
    Good luck

  • My Ipod Nano 4th gen click wheel won't work will apple be able to fix this?

    My Ipod Nano 4th Gen's Click Wheel won't work.Is there a way that Apple can repair this for me and how much will it cost?

    Apple will exchange your iPod for a refurbished one for $99 for the 16 GB one and $149 for the others. You can send it to Apple or exchange it at an Apple store
    Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    . They do not fix yours.
    Apple - iPod Repair price                       

  • Copying large files to external hard drive won't work

    I tried looking for this all over google and here, and i could only find old threads that didn't end up with a clear answer, so i decided to post one of my own for the first time.
    Basically, I have folders of music and movies that i'm trying to move over to the external hard drive (2tb WD my book studio using firewire 800) and at one point during the copy, the finder copy window will get stuck and won't move any further. So the copy doesn't go on, and even if i try to cancel it only the beachball starts rolling and finder won't respond until i restart or unplug my external.
    The weird thing is that even when I was copying a few folders that weren't too big, around 2gb or so, it did the same thing. BUT when i took 3 individual avi files that were around 3gb it copied fine.
    I really don't understand what's going on, and I want to just take the entire folder, let it copy, and go do something else rather than sit here moving file after file.
    Does anyone have any idea as to what's happening? I'm not sure whether to blame my imac or my external. external does time machine back ups fine tho.. I have it split into 2 partitions, one for tm and one as a FAT drive. Any help would be great! Thanks!

    All right. So let's say your hard drive is named 'WD MyBook' or something like that.
    Let's also say the folder you're trying to copy is your Documents folder.
    In Terminal, you'd type:
    sudo ditto pathToDocuments pathToWDMyBook
    Now obviously, those are fake paths and don't actually represent where those things are, but that's to illustrate the syntax you need to use.
    Your external drive path will be something like this:
    /Volumes/WD\ MyBook
    The trick here is that if there's a space in the name of the drive, you need to substitute a "\ " for the space. You can also put single quotes around the whole thing like this: '/Volumes/WD MyBook'
    Everything here is case sensitive. You can also drag the icon for the external drive into the Terminal window, and it will paste the path into Terminal for you.
    So the full example would turn out to be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook
    If you wanted to make sure everything went into a specific folder on your external, you'd need to add that to the path you specify. For instance, if you want everything to go into a folder named Backup on your external, the command would then be:
    sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook/Backup
    Either way,
    sudo ditto source destination
    That's it, just spaces between everything. Like I said before, you don't need the sudo necessarily, depends what you're copying.
    I don't know if that makes any sense, I'm a little out of it today. Let me know if you need further clarification on any of that, or let me know what you're copying/where it's going and I can probably help you with the syntax. Or just drag and drop! It's easy.

  • Partition of hard drive won't work...

    I currently have a WD MyBook with the following info
    Name : WD My Book 1110 Media
    Type : Disk
    Partition Map Scheme : Apple Partition Map
    Disk Identifier : disk1
    Media Name : WD My Book 1110 Media
    Media Type : Generic
    Connection Bus : USB
    USB Serial Number : 574341563543373737303130
    Device Tree : IODeviceTree:/PCI0@0/EHC1@1D,7
    Writable : Yes
    Ejectable : Yes
    Mac OS 9 Drivers Installed : No
    Location : External
    Total Capacity : 999.5 GB (999,501,594,624 Bytes)
    S.M.A.R.T. Status : Not Supported
    Disk Number : 1
    Partition Number : 0
    The drive currently has two partitions on it, one for my iMac time machine and one for my MacBook Pro time machine. When I try to repartition this drive in Disk Utility I get the error message:
    "Partition failed with the error:
    Could not modify partition map because filesystem verification failed"
    I need to clear some storage space on my internal MacBook drive and I really don't want to spend money on another external disk when I have over 500 GB just sitting there empty. I would just write directly to the current partitions but OSX flips out when you try to save random files straight to a Time Machine formatted disk.

    This seems to be a common question and problem around these parts. I am certain one of the resident geniuses will soon be responding.
    While we both wait for that to happen, you may find some helpful information by doing a search for "repartition hard drive" or "repartition time machine" in that little search box just to the right. There seems to be lots of good information there.
    But remember that monkeying around with partitioning is not without risk, and we are talking about your Time Machine backups here.
    Be careful and good luck.
    Arch

  • Ipod nano 2 generation right headphone won't work, issue with jack (several headphones were tried)

    For some reason, my ipod nano 2nd generation, doesn't play music through one of the headphones. i tried several pairs of headphones. but just one will work. any suggestions? obviously out of warranty

    You'll need to replace the headphone jack in the Nano, you can send it off to a 3rd party repair site (http://www.iresq.com) or buy the part and do it yourself (http://www.ifixit.com).

Maybe you are looking for

  • Itunes tv shows sd version no longer included

    Several tv show I downloaded quite a while ago originally came with both an SD and a HD version with purchase.  At the time, I didn't know how to only purchase the SD version, so I ended up downloading both but then deleting the HD one.  But apparent

  • 64bit os video questions

    I've put 2003 64bit on an old ide drive.  Used the workstation set up guide from another thread-- video accelerated, dx9b in place.  Audio works, lan works (thx for the driver links) -- picked up satellite internet through ICS on another machine (W2K

  • In elements 10 my video tracks on the time line appear blank

    trying to sync the audio and video but the tracks do not show anything. i;'ve had this problem before months ago and i started a new session and the problem was resolved. not this time. i started a whole new session and it did the same thing. i can't

  • How to run Javadoc on more than one project

    In my web application, I have two projects: Model and ViewController. I want to run JavaDoc on both Model project and ViewController Project combined. But JDeveloper only allows me to run them separately. Is it possible to generate Javadoc for all th

  • Password file path

    I want to create a password file in Solaris 10, is there any requirement for its path? i.e., can I create the password file in whatever path I want?