IPod nano and Voice Over mode problems

The iPod Nano keeps going into Voice Over mode despite it being in the "Off" position under settings.  Am I doing something to override the settings and how can I get it to stop?

you may have enable voice over set in the iTunes settings
to turn it off do the following
-connect ipod to computer
-when ipod shows up in the left column of iTunes under "devices" click on the ipod name
-in the summary page, scroll down to the bottom of the page until you get to a section that says "options"
-under options deselect the checkbox next to "enable voice over"
-click apply and that should turn it off
hope this helps:)

Similar Messages

  • Ipod Nano touch - voice over off, but still talks.

    Hello,
          I bought my boyfriend the ipod nano multi-touch back in March. We couldn't seem to get the voice to stop interrupting our music. Then one day my boyfriend calls me down to the car to hear something weird... So, I go down and the ipod was going crazy. Over our car speakers it was playing a song for about 3 seconds and then giving all the info about the song, then it changed the song and did this over and over again. We took it to apple and they took it into the back for a few minutes. When they came back they said that they heard what it was doing when they plugged in their headphones to the ipod. They also said that they turned the voice over off and that was our problem.... okay that was about a month ago. Now... its doing all over again! The bizarre thing is that the voice over is off... we've done the restart and the resetting but nothing seems to be working. When the voice over thing isn't going crazy, it skips songs with out us touching it... This is very frustrating! If anybody has any idea how to fix this or any information on if apple can help or replace please let me know.
                                     Thank you! 

    Something is shorting out inside the iPod or something is shorting out the headset you are using, if it has buttons on the wire.
    Even if voiceover is turned off, you can still make a 6th Gen Nano speak. What you are hearing is the track information. The nano will speak this to you if you press and hold the button on your headset (assuming you have a headset with buttons). If water gets into those buttons, it can cause the button to act like it is being pressed, pressed and held, etc.
    This can also happen if moisture gets inside the Nano.
    Does this only happen after exercise? Has it gotten wet?
    First, make sure it gets totally dried out. You can put it in a baggie with some rice to dry it out - just make sure none of the rice gets into the headset jack!
    i

  • Ipod nano and Alpine car audio problem

    have bought an Alpine 9850Ri car audio, but it cant find my ipod nano 1st generetion. In the alpines manual it is written that Apline supports the ipod nano ver 1.0 ...
    I tried connetcing ipod to another alpine model , but it cant find it too.
    So is there any way to load older software to ipod?
    Restoring, reseting wont work.

    This itrip -- http://store.apple.com/us/product/TQ044LL/A?fnode=MTY1NDA2MQ&mco=MTA4NTQy -- says it's compatible with the Nano 4g, and it uses FM to play through your car radio. I don't have any experience with it, however. The reviews are so-so.

  • Hi, I have a 7th Gen Ipod Nano and I am unable to delete songs. When synced on the PC I can select tracks but right clicking on them does not give the ability to delete. I have downloaded the latest 1.0.3 software but it did not help.

    Hi,  I have a 7th gen ipod nano and am having a problem with deleting songs. I can select the track in my ipod's library but right clicking does not bring up the option to delet. I have downloaded the latest update for the ipod but this has not solved the issue. Can anyone suggest a remedy? thanks

    Hello Lor100,
    In order to delete or add individual songs from and to your iPod, you'll need to enable 'manual mode' on the device. This will allow you to add and remove exactly the content you desire.
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Cheers,
    Allen

  • I have a ipod nano, and I bought a Bose portable sound system, when I put my ipod in the unit and play my songs in shuffle mode, it plays the same song over and over, how do I get it to play in shuffle mode?

    I have a ipod nano, and I purchased a Bose portable sound system to play my ipod on
    but it will not shuffle the music, it will play the same song over and over, until I hit the
    next song on the remote or do it manually. Does anybody have a solution?????

    Sounds like the repeat setting has been enabled.  See your iPod's User Guide for information on how to turn it off.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

  • IPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

    My daughter's iPod is using voice over and won't scroll. What setting did my child click? It will allow me to use voice control, but i need to know what's wrong first so I can give the correct command.

    VoiceOver is an Accessibility feature while Voice Control allows you to control the Music app via voice.
    To turn off VoiceOver triple click the Home button and go to Settings>General>Accessibility and turn it off. Use three fingers to scroll if necessary.
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)
    iOS: Getting started with VoiceOver for accessibility

  • PHONE WAS IN VOICE OVER MODE AND I LOCKED IT AND NOW I CANT UNLOCK THE PHONE.

    i put PHONE IN VOICE OVER MODE AND I LOCKED IT AND NOW I CANT UNLOCK THE PHONE.

    i just tried holding the home button and lock button until the screen went black then turned on again, its now back to normal.

  • HT2729 I have purchased a new iPod Nano and have tried to set it up but itunes will not recognise it.  I have 5 other devices linked to my itunes account so is this the problem and what should I do?

    I have purchased a new iPod Nano and have tried repeatedly to set it up but iTunes will not recognise it.  I have 5 other devices connected to my itunes account so is this the problem and what can I do?

    There is no 5 device limit.  There is a 5 computer limit.
    Device not detected in iTunes

  • Iphone stuck in voice over mode and not accepting passcode

    help, my iphone is stuck in voice over mode and not accepting pass code.

    If you have Siri set to work while the phone is locked, you can activate Siri by pressing and holding the Home button and saying. "Turn off VoiceOver."

  • Music and voice over does not play in iMovie

    Music and voice-over does not play in iMovie

    I am having the same problem with my iTunes. Support had me uninstall everything and reinstall iTunes again thinking it was corrupt. I did that and it worked for a couple of days. Now they say that cannot help since it is iTunes and not my iPhone and sent me here. Sometimes I can get it to work sporadically if I reboot my laptop a couple of times, but I have rebooted a few times already and nothing plays...no song previews, nothing from my library. iPods and iPhone play fine, it is isolated only to iTunes and is super frustrating. I get the same task bar up top as if it were going to play, but the play timer doesn't start. Help please!!!

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • I have an ipod nano and use one click digital to download books from my library.  My nano says I have 2449 songs which is 65 books.  I have deleted all my playlists after I listen to the audiobook.

    I have an ipod nano and use one click digital to download books from my library.  My nano says I have 2449 songs which is about 65 books.  I have deleted all my playlists after I listen to the audiobook.  Now I get a message saying I don't have enough room on my nano to transfer new books to it.  My nano is 16 GB and my operating system is Windows 7.

    iTunes and Apple's devices work as an ecosystem. iTunes is designed to sync with Apple's products, not anyone else's. You'll need your songs in a format compatable with the Samsung phone and to use the software transfer program supplied/recommended. It is essentially not an Apple/iTunes problem. You may have better luck finding the information you need on Samsung's forums.
    tt2

  • I rec'd an iPod Nano and can't get it to sync with playlist. I also have Windows 8. I need help!

    I have rec'd an iPod Nano and can't get it to sync with my existing playlist. I am using a Windows 8 Dell laptop. Any suggestions?

    One iCloud account has one user name (a .mac or .me email name) and password.  If you have set up multiple accounts in the past then you must choose one and stay with it.  If you don't know the user name, then you have a problem.  If you haven't really begun using iCloud (but you mention trying to get mail, so I'm assuming you have used iCloud before), then use a .mac or .me account you know you have or just sign up for a new account - and be sure to write down the name and password for future use.
    If you want to use the account to sync your contacts, email, calendars, etc, then each of your ios devices need to use the same account, otherwise they will be independent of one another.

  • New IPOD nano and getting HKEY_LOCAL_Machine\software\Classes\quicktime

    I tried to install the software for my new iPod Nano and it would nto load for this message:
    could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTime,QuickTime\CLSID. Verify that you have sufficient access to that key, or contact your support personnel. I've tried shutting off the firewall and made APPLE a trusted site. I even removed the old Quicktime from my computer and this did not work. Please help this not very tech savvy old lady.

    I had a similar error:
    Could not open key:
    HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib
    .QuickTimePlayerApp\CLSID. Verify that you have
    sufficient access to that key, or contact your
    support personel.
    Apple help told me it was a Windows problem and that
    I needed the Service Pack 2 (SP2). I already had that
    update, so that alone was not the problem. In surfing
    the net, I found an answer for my error that worked
    on bleepingcomputer.com from HitSquad. Here it is, it
    may work for you too:
    Click Start>Run and type "regedit" (without the
    quotes)in the Run dialog box and click OK. This will
    open the Windows Registry Editor. In the left side of
    the window, navigate to the path in the error
    message. HKEYLOCALMACHINE is the top folder,
    Software is the next folder, etc., etc. Right click
    on the Quicktime.qt folder and select
    "Permissions...". In the Security tab, it should list
    Group or user names you have. Select a user name and
    in the lower part of the window, make sure "Full
    Control" and "Read" have check marks under "Allow".
    Click "Apply". Now log back on under the username
    listed in the upper part of the window.
    Mine had a strange twist, even though I am an
    Adminstrator on my computer, for some reason, my user
    name was not listed. My son's user name was - maybe
    because he loaded the itunes initially? I changed his
    account to administrator and loaded itunes and
    QuickTime under his name and the error went away.
    Anyway, itunes 7 is now working. I'm no expert, but
    this worked for me. Good Luck!
    JB
    This was a fix for me. I have to use my wifes log in to windows. I think she might have loaded the itunes a while ago under her log in. Good Luck everyone. At least now I can use my 80 gig ipod for something else than a paper weight. I must say though, Microsoft would have had a fix by now for this.
    Good night and good luck,
    Chief

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
    -Alex

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    with that particular set of symptoms, first check on the possibility described in the following document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

Maybe you are looking for

  • JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

    hi, i get by testing in PI 7.1 (operation mapping) this ERROR: "Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)" this is my java-programm-code: import java.io.FileInputStream; import java.io.FileOut

  • HEAT = Intermittent freezing or complete crash requiring a hard reboot

    I have a stock Macbook Air 1.6ghz with the hard drive and I'm on my second machine. Both have done the same thing leading me to believe there is a serious defect in the Macbook Air. What happens is that after about a half hour of using the machine an

  • Batch Input Problem with PB10 - Updating IT22 via BDC

    Hi out there, I'm using PB10 to persist new applicants data. Im processing after save the IT22. In dialogmode i can just go back without putting input to it22. After going back the new applicant is saved successfully. Now it is possible to use pb30 t

  • Why do we have to keep restore our settings

    Our Apple TV seems to keep losing it's settings.   Every other time we use it we have to restore all the settings to use it.

  • Error finding a resource

    HI all, i meet a problem in running a J2ME dictionary in NetBeans 6.0 IDE. The error only shows on WTK(emulator). The error is: java.io.IOException: Error finding a resource /lang.txt i have already included the lang.txt file into the same folder. Ma