IPOD Nano appears in Windows XP Pro, but not in iTunes even 7.1.1

Dear Experts
I have 1 GB iPOD nano. In my computer it is identifying in My Computer. But, not in iTunes.
But, if I put the iPod in Disk Mode, then it is being identified both in My Computer as well as in iTunes also. Then, If I sinc OR manually drag music from PC to iPod in iTunes, it is happening. But after ejecting the iPod from iTunes. The iPod go on blinking mode only.
(Off and On). How to take it out from Blinking mode to normal I am not able to know.
Then in that stage If I reconnect it to PC, it is appearing in Disk mode in iTunes. Then to get it normal mode I need to restore it in iTunes. Then only it is comming to normal ipod activity after rmoving it from PC. But after restore there is no music na.
Software also updated from 1.1 to 1.3 through iTunes in Disk mode. I have downloaded lates iTunes 7.1.1 also from net.
Please guide me to solve my proble. I found so many people like me who purchased iPod of Apple suffering like this. Why Apple put this much tipical process for their product ?
Thanks in advance.
PS Prasad
P-IV   Windows XP Pro   512 MB RAM

I installed iTunes on a computer that has never had it on it before and it still will not pick up my ipod, yet windows shows it as well as the updater...I have ruled out iTunes and the cord, I believe something is wrong with the iPod itself....any suggestions? I have restored it and formated it, not sure what else I can do

Similar Messages

  • 2. gen iPod nano sometimes shows up in Finder, but not in iTunes

    Hi!
    My brand new 8GB iPod nano that I got for christmas sometimes seems to have problems connecting to iTunes. Every now and then (perhaps 1/4 of the time?) it will show up in Finder, but not in iTunes (I haven't enabled "disk mode" yet, so when it shows up in iTunes, it is not visible in Finder). Also, on one or two occasions, it showed up in iTunes, but wasn't recognized.
    Whenever this happens, I just eject the iPod from Finder and disconnect it, and on the second try (on one occasion - third try) it will show up in Finder.
    What could this be? Bad connectors/cable - or iTunes just not very reliable?
    MBP 15" C2D 15" 2.33/2/160 - MB (white) 2/2/120 - PBG4 12" 1.33/1.25/60   Mac OS X (10.4.8)  

    These problems return every now and then.
    In addition, if the iPod is connected, is shown in iTunes and has already synced properly, it will sometimes reset if I try an additional manual sync from the File menu. It's a rather benign error, since it will connect and sync as soon as the iPod has restarted.
    I also had one freeze of the iPod while playing.
    This is my first iPod, and I'm used to computers that run for months or years without a reboot. Is it just normal for an iPod to freeze/reset every now and then? My Nokia phone does it too, but then I expect more from Apple...

  • If my  ipod nano already has music on it but not my account will all my stuff be lost when i sync it to my account

    if my ipod nano already has music on it but not on my new account will all my stuff be lost when i sync it to my new accont and would i still be able to add stuff from the old account to my ipod

    All your iTunes Store purchases are linked to the account.  I do not think you can use two accounts with an iPod*, so you will have to choose one account or the other, and use only the things purchased under that account.
    *I've never actually tried, but that's my understanding.  You'd get a better answer by posting in the correct forum.  Try the iPod forums rather than the Using Apple Support Communities forum.

  • IPod Classic shows up in My Computer, but not in iTunes

    My iPod Classic shows up in My Computer, but not in iTunes. I've gone through the troubleshooting guide, reset it 3 times and put it in disk mode, reinstalled and updated iTunes and still nothing.

    Hey there april_lee!
    I have a website for you that can walk you through the troubleshooting steps on your iPod classic. This will help you determine the source of your issue and hopefully get the iPod working for you consistently again. The website can be found right here:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • 4 GB iPod Nano connected to A/C source but not charging

    I have resetted my iPod to factory settings and used all other common troubleshooting tips but...
    My 4GB iPod Nano is connected to an A/C source but does not charge. Oddly enough, the iPod says its charging, but when I disconnect the source, the battery has not charged at all. When I use other people's A/C adapter and cable, the iPod charges.
    I have used the same USB cable to connect to my computer, and it does the same thing. I can transfer data to and from my iPod using this cable.
    Is it possible for a USB cable to transfer data but not power?
    Im really confused, because the cable clearly works but no power is being transferred, either by my computer's powered USB ports or by my A/C adapter being plugged into the wall.
    Dell Precision 380   Windows XP Pro  

    More time as in longer charging times, or allow the A/C adapter and cable to chill out for awhile?

  • IPod nano works with USB 1.1 but not USB 2.0

    Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

    I have a similar problem with the following configuration:
    - Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
    - PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
    What works well?
    - All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
    - iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
    - iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
    What doesn't works?
    My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
    - Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
    - iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
    - iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
    I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
    Help!!!!!!!!!!!!!!!!

  • Nano shows up in Windows and Updater, but not in iTunes

    I have been having trouble for the past month with my ipod nano. What happened was I was installed a program to convert avi files to wmv files and it required me to install another program that put a lower quicktime on my computer, quicktime classic I think it was called. When I opened itunes later it gave me an error saying itunes needed to be reinstalled, so I went to apple and downloaded the newest version of itunes and installed it. Ever since then itunes has not picked up my ipod. It shows up in My Computer and in the updated, and when I plug it in it even launches itunes, but it will not show up in the iTunes source panel on the left.
    Here is what I have done so far with no avail:
    Also I have these two updaters installed on my computer: 2006-03-23 and 2005-09-23
    -Restored my ipod to both updaters
    -Used Gailpod’s method of formatting and then restoring. I restored to both Updaters
    -Completely removed any instances of Itunes on my computer then reinstalled.
    -Uninstalled and reinstalled itunes and ipod
    -Did all of the “5rs”
    Now I am just going crazy it feels like. It was working just fine until I installed that program. I am not sure what to do. Also my device manager is fine, all the devices are still showing up.

    I installed iTunes on a computer that has never had it on it before and it still will not pick up my ipod, yet windows shows it as well as the updater...I have ruled out iTunes and the cord, I believe something is wrong with the iPod itself....any suggestions? I have restored it and formated it, not sure what else I can do

  • Can install Windows 7 Pro, but not Boot Camp drivers

    I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
    Installed on a separate drive on my Mac Pro.
    When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
    I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
    I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
    Windows is not yet registered.... (might that be an issue?)
    Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
    TIA

    the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
    the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
    and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
    that windows is not registered should not play apart as far as I know

  • My iPod Touch is recognized on my computer but not by iTunes

    My computer sees my iPod Touch but iTunes does not!  It still sees my old iPod Nano though.

    Hello kglenn2154,
    It sounds like your iPod touch is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My Ipod Touch is connecting to my computer, but not to Itunes?

    I connected my Ipod touch to my Windows 7 Laptop, and It connected. But when I checked Itunes, it didn't say that my Ipod was plugged in! WHen I checked in my ipod to see if it said it was connected, it didn't say anything. Help?

    Have a look here  >  http://support.apple.com/kb/TS1363
    and here  >  http://support.apple.com/kb/TS1538

  • IPod touch 3rd gen recognized by computer but not by iTunes

    My iPod touch 3rd gen is stuck on the connect to iTunes screen. It became stuck on the screen while updating to the newest software and is still stuck. It is recognized by my PC as an "Apple Mobile Device USB Driver" in recovery mode but is not recognized by iTunes.
    I have tried multiple suggestions by the Apple Support pages related to this issue, and even reinstalled all Apple programs on my PC, but iTunes still fails to recognize the iPod.
    Is there any other ways I could go about solving this issue? It seems I have tried everything so far..

    See if running diagnostics will help
    iTunes for Windows: Gathering and using iTunes Diagnostics
    Next I would try another computer to help determine if you have an iPod or computer problem.

  • HT1329 Can I transfer music from my Ipod nano to a new computer ?  do not have itunes from old computer, only music on my Ipod nano ?

    Can I transfer music from my Ipod nano to a new computer ?
    I do not have my old computer with Itunes on !
    not sure I if have an older account under the same email?
    Thanks.
    <Email Edited By Host>

    Hi leewaterworth,
    Thanks for visiting Apple Support Communities.
    You can transfer purchased content from your iPod to a computer. See this article for more information:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    You may also be able to download past purchases to your new computer using the steps in this article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Best,
    Jeremy

  • My ipod appears as a digital camera but not in itunes. How to fix?

    I know this question has been asked a few times, but none of the answers I've found have given me any "how-to's". I followed the steps in the Apple Support page titled "iPod not recognized in iTunes," but they didn't help. Tips?

    - There can be many causes.  All we can sayis try the Apple troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can also try another computer to help determine if you have an iPod or computer problem.

  • I have updated iTunes on my computer and my iPod nano 4 is up to date but not all music shows up in my iTunes library..only the purchased songs..what happened and how do I get them back into the library?

    The music library in the updated version of iTunes is grossly incomplete although the music still remains on my iPod. Why did this happen and how do I get the music back into the library?

    Hi Dalegu219,
    Thanks for visiting Apple Support Communities.
    If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
    You can use these steps to make sure iTunes is opening the library on your external drive:
    If iTunes is running, quit iTunes.
    If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
    If you're using a Mac, open iTunes and immediately hold down the Option key.
    You should see one of these screens:
    Pick Choose Library and locate the library on your external hard drive.
    From:
    iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
    If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
    iTunes: How to re-create your iTunes library and playlists - Apple Support
    Best Regards,
    Jeremy

  • IPod Nano 4th Gen shows in Finder, but not under Devices in iTunes with Mac OS

    Please Help. I see the disk on my desktop, it's on Finder, but it doesn't appear in iTunes

    iPod not recognized in iTunes and Mac desktop

Maybe you are looking for

  • How to set default values in dialog programming

    hi gurus can anyone suggest me how to set default values in dialog programming thanks&regards kals.

  • Asssignment of open item

    hi all, t code:fb15 (assignment of open item:customer). how to process it regards, supriya thodimela.

  • BAPI_PTMGRATTABS_MNGCREATION problem

    Dear All, I have to create Attendances in infotype 2002 in PA30 so I am using his function module. I am passing following import parameters . Emplyee Number ABS_ATT_TYPE HRABSATT_IN-from_date HRABSATT_IN-to_date. Once I execute function module I get

  • Bug in DNG Profile Editor

    I have been trying to use the DNG Profile Editor to create an inverted tone curve to import a color negative.  I want to create an inverted linear tone curve when I convert the negative and use the downstream software to apply the appropriate camera

  • 10.8.1 won't shut down, grey screen

    Fresh clean install on 2009 Nehalem Mac Pro with upgraded Kingston SSD drive.  Everything was working flawlessly for 3 weeks.  1) Shut Down Dialogue 2) Desktop disappears 3) Computer hangs in a light grey screen, remain powered on.  Mouse movements a