Ipod nano button is stuck ?

6th gen model and the on off button is stuck down. Any one resolved this problem ?

You'll need to get it serviced.

Similar Messages

  • My 4th gen Ipod nano keeps getting stuck on the apple logo.

    My 4th gen Ipod Nano keeps getting stuck on the Apple logo screen, this happens everytime I plug it in to charge. I plug it in, an apple logo comes up, and it stays like that the entire time its plugged in. To get it to unfreeze, i have to press random buttons and unplug and re plug in earbuds. After 20-25min of doing this it unfreezes and I come to find it has gotten little to no charge after being plugged in for hours at a time. Any one else have this problem, and if so what do you do?

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • IPod Nano 3rd Gen stuck in diag mode

    I have an iPod Nano 3rd Gen stuck in diag mode. I have reset it multiple time using the select button and the menu button with it pluged in to the wall, into the computer and not plugged in at all. I reset it using the reset option under power and nothing. Please, can someone help?
    Thanks

    OK.  My first time seeing this thread so hopefully you'll share your success results with me.
    Here is the issue:
    1) iPod Nano 5th gen stuck in Diags Ver: N33GreatDane2A45bp
    2) When I rest by choosing Reset from the Diags Power sub-Menu it boots and brings up the white Apple logo and back to Diags menu
    3) If I reset by holding down Menu button and Center button, same thing happens: Apple logo followed by Diags menu (It flashes iPod Display Console)
    4) So I am always stuck in this loop.
    5) Can't restore from iTunes since the iPod is never recognized in iTunes.
    Thoughts anyone?

  • My iPod Nano buttons don't work...

    My iPod Nano buttons don't work even tho my Hold button in off when I switch my Hold button from ON to OFF my iPod shuts off then restarts by itself. My iPod is fully charged. I have updated my iPod to the latest update. I've tried to restart my iPod many times but since the buttons don't work it doesn't happen.

    If you've reset and restored and the buttons still don't work, then it needs service. Either take it along to an Apple store, or send it in.
    http://depot.info.apple.com/ipod/

  • Ipod nano 7th generation stuck in recovery mode

    My iPod nano 7th generation is stuck in the recovery mode. It's a perpetual loop. How do I restore my device to normal so that I can sync my music?

    Hi akki2094, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like you have an iPod nano that is stuck in recovery mode. 
    If you haven't already, use the steps in this article to restore the iPod to factory settings:
    Restoring iPod to factory settings - Apple Support
    If your iPod can't be restored, it may require service as mentioned in iPod nano (7th generation): Hardware troubleshooting:
    If the issue is still not resolved, please read this information on servicing your iPod.
    Best Regards,
    Jeremy 

  • IPod Nano Buttons locked up

    My son got a brand new black iPod Nano for X-mas and within 2 days the buttons locked up. I tried resetting it by holding the Menu and middle button at the same time...several times. That did not work. Then I hooked it up to iTunes and Reset it to factory settings. After it went thru the process it asked what language I wanted, but no buttons will work to select. It's now stuck on the Language screen. And no, the hold button isn't on. I don't know what else to do. Anyone with help?????

    On 8 Jan 09, I contacted Apple help desk (as in a live person, not the recorded tech support recording) and asked for a "live" tech support person and actually got one! After walking me through steps other than the already tried, support tech said I would need a replacement. The next day (9 Jan 09), got a box from Apple from FedEx, put my IPod in it and off it went to Apple. Today (12 Jan 09) I came home from Physical Therapy and on my table waiting for me was my brand new IPod and a letter stating that my problem (non-functioning buttons and stuck on Language page) was a defect and enclosed was my replacement brand new IPod. It is working great.
    Answer: If it's broken, talk to a live person at Apple and get it replaced.

  • Ipod nano language screen stuck

    can someone please help me with my ipod nano 1st generation. It's stuck on the language screen, i press the menu button and center button at same time  to rest it and restore and it's still stuck. please help me.

    try restoring the os on your ipod then re syncing the ipod to itunes

  • IPod Nano buttons break too easily

    I got my iPod nano in february/2012. January/2013 the home button broke down. It doesn't work at all. So, if I want to turn my ipod on, to work on it and start playing songs, I have to plug it, so it turns on.
    This is annoying enough, but I got used to it. I actually tried to go to an Apple store to fix it, but I went on march/2013, one month later than its guarantee expired. Great coinscidence, it broke down exactly when the guarantee was off. Well, bad luck I had!
    I kept using it, and in November/2013, the "volume up" button broke. Now its over, cant use my ipod at all!
    These two buttons broke because of usage, and thats all. My ipod didn't fall to the floor or anything, it was because I pressed them, and they broke. Its ridiculous. I always had this image of apple having products that last for a long time. But this time, my ipod was good for only 20 months, and thats it, its dead now.
    Congratulations, Apple, for having such a bad product. From now on, Im gonna think twice before buying anything from you.
    Regards,
    Christian Milanez Preis

    It uses flash memory, not an HD.
    was told if you drop it it could break it easily
    Yes, you can break it easily. It is an electronic device.

  • Ipod nano 7th gen stuck on apple logo screen

    New iPod nano 7th gen.  At first attempt to upload songs, was prompted to update software.  So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said.  I didn't pay a whole lot of attention as i was not expecting any problems).  I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost.  At this point, the device has been stuck on the apple logo screen for a couple of hours now.  The only response I can get from it is when I do a reset.  The screen will black as it should and then go right back to the logo and stay.  Please help.....Son not happy as this was one of his Christmas presents this morning.  Really not looking forward to a trip to the apple store on the day after Christmas.

    I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

  • My iPod lock button is stuck down. How do I get it out?

    Okay, so I went to turn my iPod on and found my lock button was stuck down into the housing of the iPod, I cannot get it out and cannot turn my iPod on. Should I just buy a new iPod or is there a way of repairing it?

    Contact (Google) a third-party iPod repair service and get it serviced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Ipod Nano Buttons not working??

    I have an Ipod nano 1st generation atleast thats what my Brother says.
    But any way, the Buttons stopped working after I went on a camping trip about 2 weeks ago. my friend was using it and when I tried to turn it on when I got home, it didn't work.
    Any Ideas on what I should do??

    This happened to me too, don't worry, it can be fixed. Hold down the center button and the menu button until you see the apple logo, then you can let go, it should unfreeze your ipod and make the buttons work again.
    Dell   Windows XP  

  • IPod nano 4th gen stuck in dfu mode.

    I have a problem with my son's iPod Nano 4th Gen.
    When I try to restore the iPod in iTunes it gives the error 1601 and says it doesn't recognise the iPod.
    When connected to my laptop without iTunes it says 'usb DFU device'.
    I have tried every combination of buttons, before anyone tells me to 'just hold in menu and select'.
    I can't get the iPod out of DFU mode to restore. Any help is much appreciated.

    Bump

  • Ipod nano 4th gen stuck on apple logo even after restore

    okay, i have an ipod nano 4th gen. it gets stuck on the boot logo, (apple logo) every time it tries to restart. i have rebooted, gone into the diagnostics, put it into disk mode, and even restored from there. the computer doesnt recognize the ipod unless in disk mode and no matter how many times i restore or reboot, it does the same thing every time. stuck. please help

    Since you have the "exact" same problem, why don't you do any of the following:
    If you have AppleCare and/or still under warranty, give them a call.  If not, take your iPod to your local Apple Store or AASP.  Let them properly diagnose the problem and provide you w/a repair estimate.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • My iPod power button seems stuck

    After almost 2 years my iPod has been super good until now. I've been careful with it i even use the adhesive touch button so I dnt wear out the main buttons & have those. Survivor cases so it's super protected. My power button feels stuck rven tho it was working last night it's not today. I'm so upset with this I usually love apple

    Mine too. If it gets on your bad side and you want to keep the iPod without fixing the button, go to Settings<General<Accessibility<Assistive Touch. Hold the "lock screen" icon inside Assistive touch and the iPod will power off as normal.
    To turn on, just plug it in.

  • IPod Nano Model MD481ZP Stuck on Shuffle

    Hi, my iPod Nano is stuck on shuffle, even though all the shuffle settings are turned off. Would anyone happen to have a solution for this? Thank you for your time.

    i checked the the bottom and everything seems to be in place. i dont see any bent pin and there are no problems plugging into a cable.

Maybe you are looking for

  • Linking between different websites

    Hi How to get a couple of rows of from a search result of different website from ours. For eg.: I am entering a search criteria from http://www.a.com/examples/a.jsp and searching the result from www.b.com/examples/query?q=query Now, the tricky part i

  • How to replace a variable in SO10

    Hi, I need to replace a variable &data& in SO10 to his value but it doesn't work. I use the FM 'TEXT_SYMBOL_REPLACE' to replace the words in the SO10. Could you help me please? In the transaction SO10, we have &eric&. DATA:   lt_text TYPE STANDARD TA

  • Black and white picture

    hi How do I put colour in a black and white picture?

  • Datagrid itemRenderer/itemEditor trouble

    I have a datagrid in a Flex project, the data grid has an XML file as the source (contents below), now due to the way it is formatted (I cannot change this) some of the data I want to display is inside a tag that isnt at the initial array level. Here

  • BI Administrator Error When Updating Rowcount: table or view does not exist

    I am using BI Administrator 11g. After creating a new repository and importing metadata, I brought the Physical model into the BMM layer. When I tried to update the rowcount for the tables in the physical layer, I get: There was an error while updati