Ipod nano: charging question

if i want to charge my ipod in a computer that does not have the same songs in itunes, will my songs be erased?
  Windows 2000  

Only if the iPod is set to automatically update and you click yes to this message...
If you click No or if your iPod is set to manually update, your music will not be erased/changed.
Be sure to click No.
btabz

Similar Messages

  • IPod Nano Charger question

    as everyone know
    apple Nano doesn't come with a AC adapter Charger mad.gif
    I see on the back of the Nano (power = 5-30V --- 1A Max)
    I was wondering if I could use my 3rd Generation AC adapter (which has a firewire cable with the same 10 pin connector with Nano's USB cable)
    Output for adapter is 12V --- 1.0A
    will it be ok to use this charger?!?!

    All official Apple Ipod chargers firewire or USB connected with the proper cables are guaranteed to work and will not damage your Nano.

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Help. about the ipod nano charged with usb 1.1

    i just got the ipod nano. now i am charging it. according to the mannul, it will take 3hr to charge it by usb 2.0.
    considering i only have usb 1.1, so my question is how long it wil take to charge the nano. until i wait for 6hr and the screen still shows do not disconnect. i can transfer the music and image to the nano. thanks.

    Sorry, I'm not really sure how long the charge will take with USB 1.1, but I'd guess it would be way longer that "twice as long".
    The "do not disconnect" will show as the display until you eject the iPod thru iTunes.
    Now here the tricky part since I don't have a 1.1 USB. If you eject it thru iTunes, I believe the screen will show if it is still charging or "charged". So when you know you need to charge it, plug in to the `puter, then eject and leave it connected, to see what happens.
    I do recommend getting the USB power adapter. For USD30.00, it is really worth it. Well, for me at least. I charge regularly (4 times a week) and only plug into my computer to add more music (maybe once a month). Your usage may be different, but it is so easy to come home and just plug it into the dock (plugged into the wall).

  • Ipod nano charge port: is it universal?

    This is a question about ipods in general. I have an ipod nano (not sure what gen, I think 1st) and I found an accesory for it I like that uses the charge port. But in the picture it is hooked to an ipod original/classic. Do ipods have universal charge ports aka will it probably work with my nano as well? Please help!

    Yes, all three generations of the nano use the standard Dock Connector. They should work with standard charging accessories.
    The only caveat is that they cannot sync over Firewire, but even if you did connect them to a computer's Firewire port, I think they may still charge even though they won't sync.

  • Ipod nano charges but isnt found on computer or itunes

    i recently purchased a ipod nano second generation (product)RED and it worked great but now (two months later) the center button dosent always work and when i plug it in to a windows compaq presario laptop it charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different computer please help me :[
    compaq presario   Windows XP   laptop

    i recently purchased a ipod nano second generation
    (product)RED and it worked great but now (two months
    later) the center button dosent always work and when
    i plug it in to a windows compaq presario laptop it
    charges but isnt even on the computer or itunes .
    i tried using different cords and even on a different
    computer please help me :[
    compaq presario   Windows XP
      laptop
    i got it t work i reseted it while it was plUGED IN OK thx n e waY

  • IPod nano charges but is not recognized

    Good morning.
    Im writing this topic, because I saw all the topics about this same problem, and none of them solved mine. I hope you can help me on this, so here is the thing:
    When I connect my iPod to the 2.0 usb port, the ipod lights its screen, charges, but neither windows or iTunes recognizes it.
    Ive tried going to:
    1. Going to control painel
    2. Double clicking System icon
    3. Hardware < Manager of Dispositives < Universal USB thing
    When Im there, I disabled the options at USB ROOT HUB on "Computer can turn it of dispositive to minimize waste of energy", as I have read on the other article to do, but it didnt help.
    Here is something that Ive tried everything to understand, but I cant: In the same place (Hardware - System - Control Painel), when the iPod is connected at the computer, my ipod appears on that list! But it comes with an Exclamation Point right next to its name, and it says that it needs an software to make it useful.
    The real message is:
    The drivers for this dispositive are not installed.(Code 28)
    To reinstall the drivers of this dispositive, click at 'Reinstall Driver'.
    Doesnt iTunes install it or whatever? What can I do to get my iPod recognized by the iTunes and computer, and then sync my songs?
    Please, I need someone's help!
    Thanks a lot,
    Andre.
    Ps:. 1. iPod nano, 1st generation, 2gb.
    2. Windows XP.
    iPod nano 1st generation 2gb   Windows XP  

    Did you ever find a solution for your problem. It is exactly the same as mine and I'm so frustrated with all the problems after spending so much money for something that is supposed to be fun.
    I too have done everything suggested and still no answer. My computer will not install the driver or recognize the ipod exists.
    If you did find an answer, please email me with anything you think may help.
    Thanks

  • Does the ipod nano charge quickly when connected to a mac?

    hi everyone.
    I recently switched from windows to a macbook. i noticed that my ipod nano(second generation) charges quickly when connected to the mac as compared to when i connected it to my pc? is this possible or is there something wrong with my ipod? it is 11 months since i got my nano. kindly help.
    this is my first post
    Thanks in advance
    Naren

    I assume you're talking about using the Apple cable with either component or composite cables. On a non-HD TV, the quality is quite good. I'm not sure what you mean about picture size. It doesn't letter box anything, if that's what you mean. Used to do it a lot when I went away for the weekend. It was an easy way to take iTunes rental movies with me and watch them on a big screen. I've never tried with my HD TV because i haven an Apple TV and there's no need.
    Best of luck.

  • Ipod Nano, charges in Sounddock but no sound & no response to remote.

    I have an ipod Nano 3rd gen. Works fine. Version is 1.1 PC (Settings>About>Version)
    In the Bose Sounddock it charges but no sound at all. remote does nothing.
    Any ideas. Thx!
    Pimbley

    I have a similar problem. I have had a Nano 3g for several months now and it's been working fine with my Monster car adapter and JBL Onstage. In the last couple of days, it suddenly stopped working in both. As soon as I plug the nano into either device, it freezes. I can't even do a reset while it's plugged into them. As soon as I unplug it, it is responsive again. I did the 5Rs and even downgraded from v1.1 software to v1.03, but that didn't change the behavior.

  • Ipod nano charging problem

    I got ipod nano today.
    After unpack I tried to charge 5 hours but it never charge up.
    So I disconnected usb cable and tried to operate ipod even there was mark of very low charged mark on screen.
    But it turned off suddenly with message of low battery.
    So I had to charge again but I saw the big low battery sign with thunder mark on the center of screen with some buzzing sound and tiny bip sound when I connect ipod nano to USB port.
    Are these normal?

    Bought an Ipod Nano today and I GOT THE SAME PROBLEM!!
    I could not start it at all, charged it for like 4 hours, nothing helped.
    What I though could do, was mount it to the PC, and the PC could feel it, and I could see the drive etc.
    Now to the solution, I ran the update Ipod program, and updated the program in the Ipod, and RIGHT AWAY it lighted up and now it seems like it works?
    Really strange.. Try to update yours to!

  • Ipod nano battery question.

    Ok so I think my ipod is a 2nd generation I got it in 2006 for Christmas. Here's my problem. I really dont know how to tell the difference between the three. Its a black nano 4GB.
    I can't get it to charge at all and the batter is completely dead. It will sit plugged into my computer charging for hours and all I get is battery level exteremly low (or something like that) It also wont update my songs off iTunes because of it.
    Does anyone know if replacing the battery will solve the problem or if there's something else wrong and I have to spend the money for a new one?

    I'd give it a try. If you are a DIYer, it's dirt cheap.
    Of course, it could be a problem with the dock connector. Or just the cord. Do you have a friend with an iPod whose charger you could borrow to test that?

  • Ipod wall charger question..

    Hi
    I have a wall charger for the iPod 20gb (4th gen I think) model.
    Does anyone know if the same wall charger can be used to charge up the smaller iPod Nano?

    excellent!
    Thank you

  • Simple Ipod Nano Music Question

    Ok on my nano I have probably 20 cd's loaded on there and they are all nicely organized in the "Albums" Folder on the Ipod.
    My question is I have a CD that my brother made for me with all different songs on it and different music groups.
    I want to put it on the Nano, How would I do this because I do not want these songs appearing in the "Album" section of the Nano, because these are obvilusly not full albums by one Artist.
    Any suggestions or help?

    Being its a "Personally created" CD it should show up blank in iTunes. Everything will be blank except the "Name" field, there you will see "Track 1" "Track 2" "Track23" ect ect.
    You will have to manually type in the name of each track before importing it

  • IPod nano 1G questions,

    Hello!
    While tidying my bedroom I've come across one of my family members old iPod nano 1G, after asking why it was in my room I remembered that when he had it the iPod overheated and the Display cracked. He never used it after this as he didn't know what was wrong. Now when plugging it in there is a low pitched buzzing noise and it doesn't work...
    Would I be able to send the iPod to Apple under the Recall as it overheated and broke a while ago. I just thought I would ask here before sending it.
    Thankyou,
    Jack :)

    Yes, it qualifies.

  • Apple iPod nano space question......Please help.

    I am going to be getting an iPod nano very soon....but I just recently opened my iTunes and I have 33 songs 136.8 MB and the nano only holds 500 MB is it true that if i stay at this rate I will only be able to get about 100 songs on the nano? or will I turn out around 400 500?100/500 huge difference! Please help me.

    I am going to be getting an iPod nano very
    soon....but I just recently opened my iTunes and I
    have 33 songs 136.8 MB and the nano only holds 500 MB
    is it true that if i stay at this rate I will only be
    able to get about 100 songs on the nano? or will I
    turn out around 400 500?100/500 huge
    difference! Please help me.
    The amount of songs you can fit on any iPod will be determined by how they are encoded.
    Apples estimates for song quantity are based on tracks being 128kbps AAC files of about 4 minutes each.
    Using that estimate, a 2GB Nano will hold about 500 tracks, and a 4GB Nano will hold about 1000 tracks.
    If your tracks are encoded at a higher bitrate, use a lossless encoding method, or are generally longer than 4 minutes each... you won't fit quite as many tracks as Apples estimate.

Maybe you are looking for

  • Will not boot with new hard drive

    I used a SATA drive with adaptor as a boot drive in an MDD for most of the past year. I just got a MacPro 5,1 and wanted to use this SATA drive as a data drive in the new computer. I pulled it out of the MDD and put it in the MacPro. On start up I ge

  • Convert a report painter in a report writer

    Hi. How can we convert a «report painter report» into a «report writer report»? Thanks, Julien

  • Problem to install driver of sound card

    Hi, i have a motherboard P4 socket 775  model 915 p Combo, i update last Bios 1.4 and i can't install a driver. Please help me.. Thank's

  • OWB does not allow full outer join

    I got following error (twice) while validating my mapping: "VLD-1506: Invalid Expression: Mixing full and partial outer joins in one mapping is not supported". I have following join conditions in my mapping: 1) INGRP1.DISTRICT_ID = INGRP2.DISTRICT_ID

  • Mouse-over values format

    Hi All I'm working with Xcelsius over data from SAP BW. Is there a way to change the Mouse-over number format per a specific series? If I have 2 Y axis 1 is for percentages and I want that series to be displayed as percentages when other series will