Ipod nano connector logic board click wheel

could you pls tell me the name/model of the ipod latch connector which
connect the logic board to the click wheel ribbon?for IPOD nano 2nd
i need to find it end solder it to the logic board
tks
s

maybe ipod nano connector fpc??
does anyone know where i can buy it??
tks
ciao
s

Similar Messages

Should I restore my iPod nano 2nd gen?; click wheel is unresponsive.

My iPod connects to iTunes perfectly fine, and when disconnected from iTunes, the hold switch turns the screen light on and I can see the menu. However, when I try to actually use the iPod with the click wheel, it does not work at all. Would restoring my iPod fix this problem? Or does the issue seem bigger than that? I realize that I will lose all of my music (most of which is not on my current computer), but I guess if that is the only way to fix my iPod, it'll have to do! Thank you!

Then it is probably a hardware failure and you will need to get the click wheel replaced.

Ipod nano 2nd generation 4GB click wheel

I am unable to use the click wheel to scroll through menu, worked and now doesnt, any suggestions....

http://www.iresq.com or Google for more.

My ipod nano 5g works the click wheel but later it doesn't work.

Help me.

If it's an Apple Certified Refurb from the online Apple Store, it has the same one-year warranty as a "new" nano.
Did you try using this procedure to Reset the iPod?
http://support.apple.com/kb/HT1320
If it does not work initially, try it again while it is connected to power.

I have an ipod nano and use one click digital to download books from my library. My nano says I have 2449 songs which is 65 books. I have deleted all my playlists after I listen to the audiobook.

I have an ipod nano and use one click digital to download books from my library. My nano says I have 2449 songs which is about 65 books. I have deleted all my playlists after I listen to the audiobook. Now I get a message saying I don't have enough room on my nano to transfer new books to it. My nano is 16 GB and my operating system is Windows 7.

iTunes and Apple's devices work as an ecosystem. iTunes is designed to sync with Apple's products, not anyone else's. You'll need your songs in a format compatable with the Samsung phone and to use the software transfer program supplied/recommended. It is essentially not an Apple/iTunes problem. You may have better luck finding the information you need on Samsung's forums.
tt2

Ipod Mini Frozen...Click wheel inoperable.

I've taken on the task of getting my Niece's Ipod back into working condition. I've tried everything as suggested, still not working. I started by changing the battery myself, easy enough. Then fully charges unit. I then attempted resets as suggested. I then reset to original defaults. I'm able to connect through itunes and download ect... . I do not think the "wheel is working. I haven't located any problems such as this anywhere. Is there anybody who can help me??

I quick note. The above problem was that because I did not make sure the click wheel plug wasn't in the proper position to accept the "guts", with the new battery, I damaged the plug on the main board. Having found out that APPLE would indeed repair this for 185usd I attempted this repair as well. I was able to resolder this plug to the main board. After reassembly Ipod back in working order. It was fun to do. Thanks to all on this board to posting their own experiences for my review. I will now attempt other repairs.

Ipod nano resets when I click on music, and exit podcasts.

As the subject say's, on my 4GB black, ipod nano when I click on the music tab it resets, bringing up the apple logo and goes back to the main menu. Same thing happens when I exit the podcasts menu, I can listen to a podcast but when I exit podcasts and go back to the main menu it resets bringing up the apple logo again and going back to the main menu. I can do every thing else view Photos go into the Extras tab, Settings and even Shuffle Songs which play fine. I can enter and exit these with no problems. When I plug it in to my computer it's fine even in itunes it's fine I can play anything and do anything. I did a restore of the software already and it fixed nothing, I’m all out of ideas.
Please help thanks.
CoH
4GB ipod nano Windows XP

I think I figured it out. Podcasts are the culprit, if you set up you your iPod nano to automatically update podcasts and it downloads them on to the iPod, it causes an error in the iPods software, causing it to restart when you click on music or leave the podcast menus. So I changed the settings to manually update podcasts. Putting my podcasts manually onto the iPod, they show up in the Podcasts playlist under my iPod nano menu (which shows automatically) in iTunes. This is when the error starts, when I undock my iPod nano and go to music sure-enough it restarts, I plugged it back into my computer and deleted the podcasts, undocked it and it was working fine. I converted the podcasts to AAC and then put them on the iPod. They did not show in the Podcasts playlist, they just show as normal songs, and when I undock it it works fine. Now I know that they don’t have to go into that playlist and that I can create my own smart-playlist. But it should not do something like this. I’ll make a new thread about this problem.
Thank you all for the help.
CoH

IPod Nano Connector

I have had an iPod Nano 1st generation plugged in to a Kensington dock to play through my stereo receiver. A while back I started hearing the sound drop out of one speaker and intermittent cutouts. I tried checking everything and eventually bought a new Belkin dock.
Same issue, so it's not the dock connector. I learned that if I touched the iPod while plugged in the sound would break up, and any movement would make it worse.
I cleaned the contacts as best I could but the issue still remains. I can wriggle it and get it to play normally through both channels but it will eventually cut out.
I just want to listen to my music and don't want to buy a new iPod when the one I have plays perfectly well except through the dock set up.
Any help?
Thanks...

I appear to be having the same problem as well. I got a third gen through American Express rewards as a Christmas gift for my dad. He just called me up and as we was trying to get it setup, he said the cable will not fully engage. He says it looks like plastic cover on the face of the Nano is causing the connector housing to be pushed down and go out of alignment. I haven't had a chance to look at it yet because he lives a couple of hours from me.
I wasn't sure wether to go to Apple or Amex since I got it through them so I called Amex and they are going to replace it, but I am wondering if it is a manufacturing defect and the new one is going to have the same issue. If anyone has any ideas please let me know. When I get the unit in my hands I may take it to the local Apple store before I send it back just to see what the guys there think.

First song on all albums on my iPod classic timing pauses causing click wheel to freeze. Why?

I have a iPod classic 120g 6th generation, and have no major problems since I recieved a replacement one back in 2011 when the hard drive went bad. Just recently my iPod has sbeen freezing at the 2 second of every first song on every album on my iPod. This is causing my iPod's click wheel to become unresponsive for at least 30 seconds everytime. Can this issue be fixed or not without me purchasing a 7th genration one? It will be my fifth ipod if I do have to.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

IPod 1st Generation Logic Board

Hi!
My 5GB iPod 1st Generation's logic board finally gave out. I'm having trouble locating a replacement board. Does anyone know where to get a new or used one other than iFixit (out of stock)? I need one just like iFixit's: Complete with the firewire port, and a not chipped headphone jack.
Thank you and I greatly appreciate it.
-Brian Skorski

Brian,
I may be in the same boat as you and I did Google 1st gen logic boards and didn't find much, except for WLM. They are pretty high. I thought maybe they would be cheaper for the really old ipods.
I wrote a post about my own 1st gen 10gb ipod on how my dome imac no longer reads my ipod but yet it charges the battery. I replaced the battery on mine after it died thinking it would fix everything but it didn't. ipod plays music just fine, but i can no longer load anymore new music to it. So I checked into replacement logic boards. If I do not purchase a new logic board, I'll probably just buy a new ipod (I want to anyway)
Gary

My Ipod Nano 4th gen click wheel won't work will apple be able to fix this?

My Ipod Nano 4th Gen's Click Wheel won't work.Is there a way that Apple can repair this for me and how much will it cost?

Apple will exchange your iPod for a refurbished one for $99 for the 16 GB one and $149 for the others. You can send it to Apple or exchange it at an Apple store
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
. They do not fix yours.
Apple - iPod Repair price

Click wheel and center button

for the last few weeks my click wheel will periodically not respond. sometimes it works, and sometimes it wont work. the centerbutton is the same way. the lower portion of the click wheel is slightly indented, i thought initally that it was a heat problem. here in savannah GA it gets really hot and i thought that it wouldnt recognize the heat difference or something. i am really hoping someone helps me out.

Well I have THREE 1st gen iPod nanos that ignore the click wheel. I am beginning to speculate that there is a quality issue with these because when I gently flex the PCB near the click wheel connector then the click wheel will function. I am wondering if anyone successfully fixed this. You need a TINY soldering iron and a microscope to see the tiny components. I conjecture that there is a lousy solder joint on one of the tiny components causing an intermittent connection. If I get super lucky, I will then post my results!!!!
Message was edited by: choyak

Ipod Nano 5G and Itunes 10

I have ipod nano 5g and i have itunes 10 but when i open itunes nd appsore i dont see any ipod nano 5g(so to click wheel games ) and other stuff specific to 5g.
A simple filter in itunes store for the apple device a person using is a bit of common sense which apple seems to lack(not just for iphone/ipad).
: PS : I am located in India.
the store designed in no way to be user friendly and more cluttered than organized for an application for a company like apple

These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding.
Post your complaint on the http://www.apple.com/feedbackProduct Feedback website.

Click wheel problems when plugged into dock connector

I just got my 80gb yesterday. I'm having problems with the click wheel. I have an adapter that plugs into my car stereo through the dock connector and also a Bose docking station. With my old 4th Gen iPod, I could use the click wheel to scroll through the menus while it was plugged in.
With my new 80gb classic, it has trouble scrolling when plugged into the dock connector. Is anyone else having this problem?

Similar thing is happening with mine, except the other day my boyfriend dropped it into a cup of beer... it worked fine right away but then when I tried to use it again a few hours later it wouldn't turn on. When it's plugged into my speaker dock, it lights up and first just shows a gray screen with an apple but I can reset it and then it works fine, plays music, etc... but when I take it out of the dock the screen freezes up with these horizontal lines on it. I figured it must be battery related too but not sure.
Sorry this is really unhelpful, I just wanted to commiserate and see if anyone comes up with an answer for you...

I dropped my Ipod and now the click wheel is not working anymore

Hey! I hope you can help me! I dropped my Ipod today, and now the Click wheel doesn't work anymore! The IPod broke open, but I put it together again! When I came home I connected it with the computer to see if "its" alive. And it connected and updated and everything was okay, instead of the Click wheel control! When it dropped there was "Hold" and now I can't deactivate "Hold". So I think, maybe the click wheel doesn't work because "Hold" was activated the moment the ipod dropped! BUt I don't know! Maybe something inside the ipod a soldering joint got torn apart, or something, I don't know! I just know the click wheel doesn't work, anything else seems to be okay! Can anyone help me???

hey and whops about dropping your ipod...
heres what i think but im not an ipod know it all so what i say might not help but any way...
And it connected and updated and everything was okay, instead of the Click wheel control!
well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
Hope it fixes

Ipod nano connector logic board click wheel

Similar Messages

Maybe you are looking for