IPod Nano crashes with BMW adapter after 1.3 update

Hi All,
I have a 1st Gen 4G iPod Nano that I have updated to the new firmware version 1.3. The problem is that now when I connect the iPod to the BMW adaptor kit in my car the iPod freezes after approximately 1 hour and will not change play lists or tracks. Then when I unplug the adaptor the iPod is frozen with "BMW okay to disconnect" on the screen. Once resetting, the iPod will go back to normal for approximately one hour and then the error will start over again. Does anyone have a suggestion or is it possible to revert to old firmware?
Thanks!
MacBook Pro   Mac OS X (10.4.8)  

Hi all,
Here is my update on the issue:
While reconnecting and disconnecting the iPod, I accidentally dislodged the adapter from the stereo which resulted in a service call to BMW to reconnect the adapter.
I ended up purchasing the new Product Red iPod which works fine with the adapter. To sum things up, the fact that I just updated the firmware may not have anything to do with the BMW adapter problems. The BMW adapter is finicky. I have friends with the same adapter in an X3 as well as a Mini Cooper with the same issues; the adapter becomes loose and begins to malfunction.
My recommendation is test your adapter with another iPod and if the problem persists take your car back to BMW to fix the problem.
*Note: Cold weather should not affect how the adapter works because mine has been working fine in -30 degree Celsius weather
MacBook Pro   Mac OS X (10.4.8)  
MacBook Pro   Mac OS X (10.4.8)  
MacBook Pro   Mac OS X (10.4.8)  

Similar Messages

  • Ipod Nano charging with power adapter

    I have just purchased a 4Gb Nano and was wondering if I can use the power adapter (Model No.: A1003) from my old and now sadly defunct 40Gb touch wheel/dock connector ipod?
    Imac G5   Mac OS X (10.4.3)   Wintel user until August 2005

    yep! you can definitely use your old power adapter to charge it. ive used my adapter which came from my 3rd gen ipod with all my other ipods and it works fine!
    chris

  • IPod touch crashed with white screen after using Griffin TuneJuice

    Hello all,
    I have an iPod touch first generation that has worked flawlessly for about 1,5 years. Recently I bought a Griffin TuneJuice (external battery) to get longer battery life. The salesperson said it should work with the Touch, and it did at first. But later on it did not charge the iPod anymore. I tried disconnecting and reconnecting, restarting the iPod and so on.
    Suddenly the screen of the iPod went completely white after a reboot. I can not get it to show anything anymore. I have tried resetting (holding power+home for 10 secs), reformatting and restoring, upgrading the firmware to 2.2 but none seems to work.
    Googling for the problem it seems everyone who encountered this got it repaired under warranty, which is obviously not a solution for me since it's too old. So what I need to know is from a technical point of view what goes wrong when the screen is blank. The iPod seems to work otherwise (for example, it syncs perfectly with the computer and the "clicks" are playing).
    I guess that something must be wrong with the firmware at a lower level than iTunes can repair. Is it possible to repair the firmware by using some lowlevel tool?
    Or could this be a hardware problem (the guy in the store suggested the docking connector might have broken or short-circuited). In that case, is there any good guide on how to open and repair an iPod?
    From searching different forums it seems the problem is quite common, and I hope that someone smart enough has got the problem and managed to solve it.
    Thankful for any help.
    <Edited by Moderator>

    hold the power bottom and the home bottom then it will shut off after that just turn it back on ,then it should work, it may take longer than 10 seconds, you gotta be patient.. because i had the white screen and did this, hope it helps.

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • Installing ipod nano on a windows computer after it has been used on a Mac

    I am trying to get an ipod Nano to work on windows after it was originally synched to a MacBook.
    I have iTunes 8, and we've already unistalled and reinstalled it once. iTunes recognizes the iPod, and says "iTunes has detected a Macintosh formatted iPod. You must restore this iPod before you can use it on windows." When I try to click the "Restore" button in iTunes, it generates an error message that says the iPod cannot be updated because I'm not connected to the iternet....but I am.
    Ideas?

    PS I know that sun's Jar files are supposed to be
    executable on win32 platforms with JRE2 installed;
    however, I tested it out on some computers with that
    runtime installed(by the installer progrma from sun)
    and for some reason or another, it didn't do anything
    when I clicked on the jar archive...That's because you didn't have the main-class in the manifest file.
    That's the easiest way, you have a jar and a double click on win and it runs.

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • One of the episodes that i had on my IPOD NANO 8GB was removed off when i put a new episode of that tv show that i bought and put it on my IPOD NANO 8GB. How do i get the first episode that i bought back on my Ipod Nano 8GB with the new episode on it?

    I had an episode of a tv show series on my IPOD NANO 8GB. I just bought a new episode of the tv show and I went to put it on my IPOD NANO 8GB and it removed the first episode off my IPOD NANO 8GB. Now, all I have is the new episode of the tv show on my ipod and I can't get the other back on there. How do I get the other episode that I had on there first back on to my IPOD NANO 8GB with the new episode on my ipod?  Please Help Soon.

    Hello Lisa,
    Double check your iPod's sync settings from under it's TV Shows tab in iTunes.  Make sure it is not set up to sync only unwatched episodes.
    B-rock

  • Does ipod nano work with ipod photo dock, s-video out?

    Does the ipod nano work with the ipod photo dock, with an s-video out? Will apple make one for the nano specifically?

    The iPod nano cannot show photos on an external device, I suspect Apple have not built this feature into the hardware. The options for showing to a TV are not in the photo menus either.
    Ian

  • Does the IPod Nano sink with the nike fuel band

    Does the IPod Nano sink with the nike fule band? I am getting the IPod nano for christmass and I was wondering if that is compatable with the fuel band? I have seen my firend sink his with his IPhone and was wondering if I could do the same?

    http://www.apple.com/ipod/nike/

  • Does the ipod nano come with Apple Earphones with Remote and Mic

    does the ipod nano come with Apple Earphones with Remote and Mic

    Click on the Ipod gray tab at the top of this site.  There you will find all the information you need about the model iPod you wish to purchase. 

  • Does the iPod nano come with a means to charge the battery?

    Does the iPod nano come with a means to charge the battery?

    Yes it comes with a syncing cable that you can connect to your PC's USB ports to charge or you can connect it to an Apple wall adapater (sold seperately).
    B-rock

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

  • Ipod nano compatibility with ipod accessories

    Is the ipod nano compatible with other ipod accessories? Will it work with my Bose speaker system built for the ipod? Will the car charger and battery backups that I have purchased for my ipods work with the nano? thanks

    I want to get an ipod nano, but i have the earbud headphones that i bought separately from the ipod. you know, the ones with the 3 different rubber sizes or your ears? well i was wondering if it would work with the ipod nano. i saw that the nano had different headphones.

  • Is new software around for Ipod Nano 5G with the Nike sensor and Polar wearlink HeartRateMonitor to get spoken feedback on heartrate-zone, so you get a warning if your heartrate is higher or lower than the predefined range.

    I have:
    Ipod Nano 5G with Nike+ sensor and Polar wearlink Heartrate monitor:
    works fine, linking is easy, but....
    Software is rather minimal: Heartrate is on the screen and you get feedback when the center-button is touched.
    To get better results, more functions would be useful, like defining a heartrate zone (like Polar`s own-zone) and automatic spoken feedback if the heartrate is out of the pre-defined range. Also automatic spoken feedback on actual and average heartrate every pre-defined time-interval would be very useful: like the spoken feedback on distance and actual pace I get on my Iphone with Nike+GPS
    Anyone have any suggestions ?

    I have the same issue! I purchased a nano 6th, polar hrm so I could run and receive spoken feedback when my heart rate was outside my preset zone.  My suunto t3 used to beep when outside the preset zones.  Automatic, periodic beeps or spoken feedback is the most important information to receive during exercise. I hope apple can update the software to add this simple yet critical feature.

  • How do I sync my iPod nano 7 with my HP Laptop and 4s iPhone?

    How do I sync my iPod nano 7 with my HP laptop and my iPhone 4S?

    You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

Maybe you are looking for