Ipod nano flash bright white when buttons pressed

I havd washed it before , and the backlight was out...... i left it on the charger all day and the lights back on YES!.....but turns solid white and freezes when i push a button

I started having this problem the day after I got my Nano. I was able to get it going again by just resetting a bunch of times. But it seems this time it's f**ked for good, I now know why I had never got an ipod before; BECAUSE THEY'RE A F**KING HEADACHE.
At this point I've managed to get my nano to shut off by plugging in headphones, getting a song to play, then holding the play button. This is the only way to get the unit to shut down. Otherwise it just displays a white screen. I did some of the 5 r's, but after reading the posts I opted out of restoring. Anyone have a fix for this? This whole experience has been miserable right from needing itunes 8.0 which requires smartcard drivers for some f**cked up reason. If I have to send this unit back, I'll be strategically placing a hot steaming coiler in the box.

Similar Messages

6th gen iPod Nano screen turns white when connected

I just got my replacement Nano for the 1st gen Nano recall. I plug it in to sync and the screen is white. Sync finished and I unplug it. I remove the dock connector cable and the homescreen appears, but is almost in a mirror like state. The screen is in the correct orientation, but the letters are backwards and hitting the lets say radio app opens the music app scrolling down, scrolls up, etc. Sleep-wake fixes the issue. Plug it in again and does it again. Restore it. Doesn't fix it. Hard reset, doesn't fix it.
Playing with it a bit, it seems to be an issue with the dock connector. I wiggle the cable and the screen turns white or goes to that mirror like state until I sleep/wake it. Unplug it, screen goes white/ to mirror like state until completely unplugged. In any case, if I touch the cable and wiggle it, the screen goes between white and mirror state.
Will an Apple Store replace it or do I need to send it in since it was a replacement program?
Thoughts?

You have 90 days warranty on your replacement Nano, see if you can visit an Apple Store or get it serviced.

Ipod nano 6 gen hangs when turning off the backlight. That is, it doesn't respond to button presses on the touch screen.

ipod nano 6 gen hangs when turning off the backlight. That is, it does not respond to button presses on the touch screen. He also has just a white screen instead of the desktop display. Tried to rearrange the screen from another Ipod nano, but nothing came of it - all the same ... What should I do?

Hi Rc_Drifter,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano. Restoring the device may resolve the backlight issue as well.
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I hope this information helps ....
- Judy

I just bought an iPod nano 7th gen. When I connect it to my laptop, it doesn't recognize the ipod. I tried charging it, but now it won't turn on when i push the power button. Please help me! I don't want to have to return it.

I just bought an iPod nano 7th Generation. When i connect it to my laptop, it doesn't recognize the ipod. I tried charging it but when I hold the power button, nothing happens. I don't want to have to return it. Please help me!

Hi dnix257,
Welcome to the Support Communities!
What version of the Windows Operating System do you have?
What version of the iTunes software?
The troubleshooting steps below may help you with this:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Judy

I have my ipod nano 5th generation and when i plugged it to my computer it is recognized but i cant do anything. On the ipod all i can see is a black screen with the apple sign! How can i fix this?

I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?

Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling

Looping through a table Help needed ....Forms 10g..... When Button Pressed

Hye craig, hamid, christian and all ...........
i have a user access interface which i create where there are two fields username and password and a button,
i have also created a table USERS for users which have username and password fields ..... On useraccess interface i coded on WHEN BUTTON PRESSED like this
declare
go_block('users');
execute_query;
declare
begin
     if :useraccess.username=:users.username and
          :useraccess.password=:users.password then
          go_block('MAINPAGE');
          else
          go_block('USERACCESS');
          MESSAGE('SORRY WRONG PASSWORD OR NOT A REGISTERED USER');
          MESSAGE('SORRY WRONG PASSWORD OR NOT A REGISTERED USER');
          end if;
end;
This code works for a single user in USERS table but for multiple users there has to be some looping system
which matches the USERACCESS and USERS tables fields thoroughly ....

Hi Majid,
I can suggest you a workaround for this. raise a ON-LOGON trigger and you can use the LOGON_SCREEN builtin to flash the logon screen at runtime. And then try capturing the username and password.
DECLARE
connected BOOLEAN := FALSE;
tries     NUMBER := 3;
un        VARCHAR2(30);
pw        VARCHAR2(30);
cs        VARCHAR2(30);
BEGIN
SET_APPLICATION_PROPERTY(CURSOR_STYLE, 'DEFAULT');
WHILE connected = FALSE and tries > 0
LOOP
    LOGON_SCREEN;
    un := GET_APPLICATION_PROPERTY( USERNAME );
    pw := GET_APPLICATION_PROPERTY( PASSWORD );
    cs := GET_APPLICATION_PROPERTY( CONNECT_STRING );
    LOGON( un, pw || '@' || cs, FALSE );
    IF FORM_SUCCESS
    THEN
      connected := TRUE ;
    END IF;
    tries := tries - 1;
END LOOP;
IF NOT CONNECTED THEN
    MESSAGE('Too many tries!');
    RAISE FORM_TRIGGER_FAILURE ;
END IF;
END ;   a sample piece of coding to help you out.
Regards,
Manoj Chakravarthy

Raise Form_Trigger_Failure on When-Button-Pressed ORA-01410 Invalid RowID

Hello to all...
I have an error whit Raise Form_Trigger_Failure on trigger When-Button-Pressed.
I guess the error is when does the Raise Form_Trigger_Failure
When validate something, this validation ask me if i want to continue.
When i answer NO, give me this error: ORA-01410 Invalid RowID
If i answer YES, the process continue and in an unexpected moment, give that error too
Why give me that error?
How can i resolve this error...help me
thanks...
Part of Code
FOR i IN 1..TItemsAsi1.LAST LOOP
IF TItemsAsi1(i).c_error IS NOT NULL THEN
l_error := l_error + 1;
IF TItemsAsi1(i).c_error = 'ND' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','No hay datos suficientes para generar Asiento de cierre relacionado a Reconocimiento de los recursos del ejercicio') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     ELSIF TItemsAsi1(i).c_error = 'AD' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','Hay cuentas Acreedoras con saldo Deudor CUENTA: '||TItemsAsi1(i).c_cuenta||'. ¿Desea continuar con el cierre? ') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     ELSIF TItemsAsi1(i).c_error = 'DA' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','Hay cuentas Deudoras con saldo Acreedor CUENTA:'||TItemsAsi1(i).c_cuenta||'. ¿Desea continuar con el cierre? ') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     END IF;END IF;END LOOP;

delete from <table> where rowid like '<block id>%'Arrgh. To be honest, this is the worst sql-statement i have seen this year. i hope the statement will raise an error on execution, but even if it would get executed, what should be the reason for something like this? Delete anything which is stored in a specific block, regardless of the meaning ?

Error -- No Such Trigger('when-button-pressed')

Hi,
I am getting the error ""No Such Trigger('when-button-pressed')"",
when I am executing the code EXECUTE_TRIGGER( 'WHEN-BUTTON-PRESSED' );
on some item(Key-Next-Item), although WHEN-BUTTON-PRESSED trigger exists.
What could be the problem ?. It worked till yesterday, giving error from today, I havent
changed any thing.
Thanks in Advance
Devender

Steve's tip is the only good solution for this case.
The problem in your case for example is:
Let's say you have a block-trigger, which fires after your execute-trigger.
Now a colleague of you, which don't know your code, create a WHEN-BUTTON-PRESSED on an item, then the new code is started and not the block-trigger-code.
So, don't ever do this. Write your code in a package-function or -procedure and call it from the trigger. So you can re-user the functionality
Gerd

Calling a report from forms - FRM-40735 when-button-pressed raised unhandle

Hi,
I created a form to generate a pdf report.
its not going too well, so i need some help.
my form only has one button , when pressed I want it to generate a report in pdf format.
i created a when-button-pressed trigger and the following code is below:
I also create a web service proxy jar file,
the jar file is in the FORMS_BUILDER_CLASSPATH, and the jar file is imported from forms builder without any issues.
As of now I am hard coding everything in the code below to see if it works.
The error I am getting FRM-40735 when-button-pressed raised unhandled exception ORA-105100 i dont know why ?
This error is occurring at this line of code, please help, this is my first time doing something like this.
obj := publicreportserviceclient.new(); DECLARE
param_name varchar2(200);
un varchar2(200);
pw varchar2(200);
out_file varchar2(200);
obj ORA_JAVA.JOBJECT;
BEGIN
obj := publicreportserviceclient.new();
param_name := 'EMP';
un := 'Administrator';
pw := 'Oracle123';
out_file := 'D:\DevSuiteHome_1\j2ee\home\default-web-app'||'output';
publicreportserviceclient.callRunReport(obj,'/~administrator/Learn/Test1/Test1.xdo','EMP','141414',un,
pw,'pdf','New_Template',out_file);
web.show_document('http://jmenge-de.de.oracle.com:8889/j2ee/' || 'output');
exception
--check for ORA-105101
when ORA_JAVA.EXCEPTION_THROWN then
     message('Java Exception : '
      || Exception_.toString(ORA_JAVA.LAST_EXCEPTION));
      ORA_JAVA.CLEAR_EXCEPTION;
      return;
--check for ORA-105100
when ORA_JAVA.JAVA_ERROR then
               message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
          return;
END;This is my java function
    public void callRunReport (String reportPath, String paramName, String paramValue, String
    username, String password, String format, String template, String outFile) {
    try {
            bip_webservice.proxy.PublicReportServiceClient myPort = new bip_webservice.proxy.PublicReportServiceClient();
            // Calling runReport
            ReportRequest repRequest = new ReportRequest();
            repRequest.setReportAbsolutePath(reportPath);
            repRequest.setAttributeTemplate(template);
            repRequest.setAttributeFormat(format);
            repRequest.setAttributeLocale("en-US");
            repRequest.setSizeOfDataChunkDownload(-1);
           ParamNameValue[] paramNameValue = new ParamNameValue[1];
            paramNameValue[0] = new ParamNameValue();
            paramNameValue[0].setName(paramName);
            String[] values = new String[1];
            values[0] = paramValue;
            paramNameValue[0].setValues(values);
            repRequest.setParameterNameValues(paramNameValue);
            ReportResponse repResponse = new ReportResponse();
            repResponse = myPort.runReport(repRequest,username,password);
            byte[] baReport = repResponse.getReportBytes();
            FileOutputStream fio = new FileOutputStream(outFile);
            fio.write(baReport);
            fio.close();
        } catch (Exception ex) {
                    ex.printStackTrace();
    }Thanks - please help

If there is a way to make it work with Bi publisher, Please let me know.
I need to something to make it work with BI publisher.
thanks,
Edited by: Rooney on May 27, 2010 1:27 PM

How can I call my chart in Forms6i on When Button Press Trigger?

Hi Friends,
I have make a chart in Graphic Builder 6i and save on path C:\graph\test.ogd
Now I want to run this Chart from Form6i on When Button Press trigger.
I have call my report in forms using this command on When Button Press trigger.
Run_Product(reports,'C:\Cheema\Qdir_store\reports\pmms\sec_backlog',asynchronous,runtime,filesystem,TO_CHAR(NULL));
So tell me How can I call my chart in Forms6i?
Please reply me on urgent.
Thanks,
Shahzad

Just to recall after a long break of couple of years..... Pls check out if not wrong.
First of all you need to embeed the chart object on your layout window and make it visible = FALSE. This is a design time work. In the button press event, show the chart object by setting the visible property = TRUE.
Note, i could not paste u the sample code as i don't have forms installation on my PC. The above states is a logic you can apply.

I got a new iPod nano 7th gen., but when I tried downloading a video from my iTunes library a message popped up that said: Some of the videos in your iTunes library cannot be copied to your iPod because they cannot be played on this iPod.

I got a new iPod nano 7th gen, but when i tried downloading a video from my iTunes library a message popped up that said: Soem of the videos in your iTunes library were not copied to yor iPod because they cannot be played on this iPod. What should I do?

I kept having a similar problem - 3 out of the 10 videos I had on iTunes wouldn't sync. They were in the right format and I KNEW they worked on my iPod because I'd RECORDED them on my iPod. I finally figured out what to do! Go to the movies in your iTunes library. Click on one that does not sync. Click on "Advanced" at the top of iTunes and choose "Create iPod or iPhone version". Once that's finished, be sure you delete the old version so you don't keep getting the error (or have 2 copies of the same video) and sync. This should eliminate the problem. At least it did for me!

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/

ITunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

iTunes no longer recognizes my iPod nano 5th gen. When plugged into macbook usb it appears as my iPhone. Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

Could just be a loose connection or that the cable itself is going bad. There are a number of factors that could play into this scenario.
B-rock

Calling a function in WHEN-BUTTON-PRESSED

Hello,
i have in when-button-pressed a line containing
select pachet_salarizare.ani_vechime(data_min, to_number(to_char(sysdate,'YYYY')), to_number(to_char(sysdate,'MM'))) into ani_vechime from dual;so i call a function which is in pachet_salarizare package (package created in program units, in Forms).
when compiling, i get: function 'PACHET_SALARIZARE.ANI_VECHIME' mai not be user in SQL.
how can i deal with this? i need the result of that function in a variabie, ani_vechime.
Thanks!

Uh, thank you. i thought it's not possible what i wanted..
but strange why cannot be called function in select statements
Regards,

Ipod nano flash bright white when buttons pressed

Similar Messages

Maybe you are looking for