IPod nano freezing when plugged into Belkin Tunecast

Everything has been working fine with my ipod nano 3rd generation until recently. I tried to plug it into the tunecast in my car and the ipod froze. I've tried resetting it and this still happens. A different ipod has been working fine with the tunecast which makes me think there is nothing wrong with the belkin but the ipod is fine even when plugged into the computer which makes me wonder which one is not working properly. Any ideas????

I am having this exact same issue with my wife's 3g, 8GB nano and her Monster iCarPlay. the Monster unit and the nano worked fine together for a week or two but now the nano locks up when connected to it. You disconnect the nano and it goes back to working fine. I have reset the nano while both connected and not connected to the Monster and have done a restore in iTunes and I am still having the same issue. I called support and they basically told me to buy a new car adapter. I don't believe this is a good solution since the Monster worked with the nano for a couple of weeks when we first got it and the Monster still works fine with both my wife's and my old ipod mini's. Any suggestions?
Message was edited by: jpdubose

Similar Messages

  • Ipod touch freezes when plugging into ford escape via aux input (not sync)

    My daughter tried to plug her ipod touch into her escape using line-in and it freezes.  My son's does not.  His is newer than hers.  Can I assume a software update will correct her problem?  She says she has never updated the ipod software...don't know if its 1st or 2nd generation.  Her escape does not have Sync, just an aux input jack.

    Hi,
    Try here for identifying your iPod:  http://support.apple.com/kb/ht1353. 
    Hope this helps! 
    ---likeabird---

  • My iPod only works when plugged into a wall socket!

    Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
    Any ideas??

    Sounds like a dead battery.  You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
    B-rock

  • Ipod "Click" sound when plug into the Computer

    Hi All,
    My Ipod harddrive clicked periodically when plugged into the computer which never happen before. I can hear the harddrive spin sound but periodically sound clicked in the harddrive.
    Just wondering if anyone experienced this problem before?
    Any suggestion how to fixed it? Is the warranty cover this kind of problem as well?
    THanks for all reply

    Yeah I think so.. Some of the update fixed some problem but some of them make them worse and i hate when apple didnt give the search function on Ipod with video 1st generation
    Just hope my ipod has no problem regarding this issue.

  • How to recover music? iPod only works when plugged into wall outlet

    My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
    The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
    When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
    On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this? 
    I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
    Any help would be very appreciated!

    Bump. Is there no way to solve this?

  • Bose Soundock - Ipod Messing up when plugged into bose

    Hi, yeah for my birthday i got a Bose Soundock and when i plugged my ipod into it played fine. Then when i unplugged it from my Bose Soundock, and tried to plug it into my computer, the computer won't recognize it. I have looked under the control panel settings and all the stuff i could do to find it. I need to know if my ipod is screwed forever or if it can be fixed....?

    I'm having a very similar problem. Upon first connecting (after iTunes 7 update) my iPod to my Windows notebook, it prompted me to update my iPod. So of course I said ok.... While trying to update the iPod it (the iPod) frooze and didn't install the update. I found a workaround to trick to to install. (Tell it to update it, disconnect for a few seconds and reconnect, it won't freeze and will restart and install the update.)
    Anyhow, now that the iPod has been updated to 1.2 software, I get artifacts on the screen (blocks & lines of various colors) and eventually it freezes up. I thought I'd try to restore the iPod, however, doing so did NOT really help. I still get the screwed up screen and frozen iPod! Although, it didn't freeze when it was updating the iPod with all my content (had prior to restoring).
    Not sure what Apple did, but they sure messed this one up!!
    EDIT: I found this post, which describes exactly what I've been dealing with... http://discussions.apple.com/thread.jspa?threadID=637616&tstart=0
    Message was edited by: BMFord002

  • Ipod locks up when plugged into computer

    I just downloaded itunes 7. And my video ipod came up on the desktop and in itunes as usual. Then I updated my ipod with the latest software and from now on whenever I plug it into my computer it instantly locks up and is not recognized by my computer. Suggestions?
    Powerbook G4   Mac OS X (10.4.7)  

    I'm having a very similar problem. Upon first connecting (after iTunes 7 update) my iPod to my Windows notebook, it prompted me to update my iPod. So of course I said ok.... While trying to update the iPod it (the iPod) frooze and didn't install the update. I found a workaround to trick to to install. (Tell it to update it, disconnect for a few seconds and reconnect, it won't freeze and will restart and install the update.)
    Anyhow, now that the iPod has been updated to 1.2 software, I get artifacts on the screen (blocks & lines of various colors) and eventually it freezes up. I thought I'd try to restore the iPod, however, doing so did NOT really help. I still get the screwed up screen and frozen iPod! Although, it didn't freeze when it was updating the iPod with all my content (had prior to restoring).
    Not sure what Apple did, but they sure messed this one up!!
    EDIT: I found this post, which describes exactly what I've been dealing with... http://discussions.apple.com/thread.jspa?threadID=637616&tstart=0
    Message was edited by: BMFord002

  • IPod Nano Freezes when unplugged with static type line on screen

    I've seen a lot about the "white screen" but mine is slightly different. It's a 2nd gen, 4GB. When plugged in, everything works fine. Syncs up, plays music, etc. As soon as it's unplugged, it gets a static looking bar across the screen and everything freezes. If music was playing, it stops, no chance of getting the click wheel to do anything. I've tried the 5r's and have done restores in regular mode and forced disk mode (since I can get the click wheel to work while plugged in). I eject it properly and everything. I'm leaning towards battery issue. Any one got a fairly certain answer ? I'm a technician and can replace my own battery if need be, but I'm new to the iPod so I'm still learning symptoms and solutions here.

    I forgot the details:
    ※ The iPod has Software Update v1.1.3 and recently been restored using iTunes v8.2.1 with no problem during the update/restore process.
    ※ The iPod works normally; battery charged when connected to PC (USB), internal speaker produces clicks (when using the wheel), screen light works fine, all settings have no problem.
    ※ The grey horizontal line only appeared when the light goes on (white). If the light goes off (dim), there is no grey horizontal line visible on the screen.
    ※ The grey horizontal line appeared at a quarter part of the screen (from the bottom of the screen), on the lower part of the Apple icon.

  • Freezing when plugging into USB port

    I am so angry at my iPod right now.. The past three days I have tried to plug into my USB port and upload songs and each time I plug in, it freezes up.. I am new to the iPod world as of Christmas and am not sure if there is something I am doing wrong... It just started a few days ago.. I am so upset because I have to wait until the battery dies to turn it back on.. Someone please help!:)

    I am so angry at my iPod right now.. The past three days I have tried to plug into my USB port and upload songs and each time I plug in, it freezes up.. I am new to the iPod world as of Christmas and am not sure if there is something I am doing wrong... It just started a few days ago.. I am so upset because I have to wait until the battery dies to turn it back on.. Someone please help!:)

  • Ipod zaps me when plugged into ac charger

    My ipod nano zaps me when i plug it in with an ac charger. (It actually hurts, not just a little zap) I've tried it with a few other ipods & mine's the only one that does it.
    Does anyone know if i can get this fixed when i dont have the receipt?

    I don't know about Australia, but in the US you have the option to register the iPod online when you first plug it in, so Apple has a record of your purchase that way, and they can also track the serial number and know the date it was sent out to the store, giving an "earliest possible date" for your purchase. Especially since the nano only came out last fall, you are obviously within the warranty period, so I'd contact Apple about a warranty return.
    12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+ Mac OS X (10.4.4) 3G iPod, iPod shuffle, iPod nano

  • 6 GB iPod Mini discharges when plugged into Mac Mini via USB 2.0 hub

    I have a 6 GB iPod Mini and when i connect it to my computer, instead of charging, it discharges. The iPod is connected to a self powered USB 2.0 hub. Does anybody have any ideas of what to do. I need a hub because the Mac Mini only has 2 USB ports and the keyboard and mouse don't work through the hub (well the keyboard it self does but the hub doesn't which the Mighty Mouse is plugged into)
    Thanks

    When i say self powered i mean that it has an external power supply (my hub it has two lights, when it is connected to USB and has p\s connected and plugged in a light lights up that has the word "Self" next to it, when it is connected just to USB it has a light that lights up with the word "Bus" next to it.) I am sorry if i confused you (or if i confused myself). About the firewire thing, i am planning to get the next normal iPod Apple releases but the current ones dont support firewire so the new one probably wont either, so i will be in the same boat as i am now when i get a new one.

  • IPod erases songs when plugged into port.

    if anyone happens to know why an iPod shuffle would erase the songs off of it every time it plugs into the computer, can you let me know? It's really annoying me. It's probably just a setting I'm missing, but I'm unable to check right now. Thanks a lot.

    Hi latriste,
    I had the same problem when I thought I could delete songs from my hard drive and connect my shuffle (with those songs still on it). When I did connect my shuffle, it updated itself, and the songs I didn't have on my HD were deleted from my shuffle.
    Apparently, a shuffle is different from the other ipods because you can't set it to 'manually update' itself.
    Here is my recent thread where I asked a similar question:
    http://discussions.apple.com/thread.jspa?threadID=476453&tstart=0
    In short, with a shuffle, you need to keep all your music on your computer for it to stay on your ipod.
    HP   Windows XP  

  • IPod classic freezes when plugged in

    Whenever I plug my iPod into the computer, it freezes at the "Connected, Eject before disconnecting." screen. The actual iPod freezes and I have to reset it to use it again.
    Details:
    1. My main computer is a PC with Windows XP. I've tried 2 different PCs and a Mac, none of them recognize it.
    2. It charges properly while connected by USB.
    3. My Computer doesn't always recognize it, when it does see a drive there and I try to access it, Explorer crashes.
    4. iTunes doesn't always recognize there's an iPod attached, when it does recognize that its there, it offers to restore after telling me the iPod was corrupted, but never goes past the "Restoring" mini-window.
    5. I can't restore since everytime I plug it in the iPod freezes.
    I've tried resetting the iPod repeatedly, reinstalling the USB drivers, re-registering the Windows .dll's (even though the same thing occurs on MacOSX), to no avail.
    My data and music is still there. I can still play it. I just can't sync or restore my iPod at all.
    Any ideas?
    TIA

    There have been countless threads about this issue, and apple just locks them and acts like nothing is wrong.
    As of now, the only solution to this problem is to return the ipod.

  • My computer freezes when plugging into my usb port

    I just got and ipod shuffle when i plug it into my usb port a few seconds later my computer freezes and i have to restart

    Try a different USB port. I had that issue with my shuffle once and using another USB port resolved it. Here is a great iPod Shuffle Support page. Keep it handy for anytime there is an issue or question regarding your shuffle. It's very thorough. http://www.apple.com/support/ipodshuffle/
    Good Luck,
    Rachyl

  • 2009 17" Macbook freezes when plugged into Apple 24" LED Display

    In the last few weeks I have noticed that when I plug my 17" UBMP into my 24" Apple display, the computer freezes and the 24" display remains dark.
    The computer freeze shows no spinning ball, there is curser movement but nothing will work/open and I am forced to hold the power button until the machine restarts. When it does the display and machine work ok, unless I disconnect and re-connect the display.
    This seems to happen 1 out of 5 times. I have a logitech wave cordless set with a usb stick/receiver in the display, however this does not seem to be the issue as it does not freeze sometimes with the stick connected.
    anybody else see this issue?

    Hi, Ray. Disconnect the Logitech USB dongle from the display, and try connecting and using the display with only your MBP's built-in mouse and trackpad in use. If you have no trouble with that simplified setup, try plugging the Logitech dongle directly into one of your MBP's USB ports, instead of into the display. Test again. Post back with results.
    It seems very likely to me that the Logitech devices are somehow involved in the problem, even though it doesn't arise every time you connect the external display with the Logitech dongle connected to it.

Maybe you are looking for

  • Dynamic class loading problem using unknown JAR archive and directory names

    I read the following article, which enlightened me a lot: Ted Neward: Understanding Class.forName(). However, it took me some while to understand that my problem is the other way around: I know the name of the class, I know the name of the method, bu

  • How to Define Specific CPU Frequency in Laptop Mode Tools?

    I would like to know how to set a specific maximum and minimum frequency for Laptop Mode Tools. Here is my /etc/laptop-mode/conf.d/cpufreq.conf: # Configuration file for Laptop Mode Tools module cpufreq. # For more information, consult the laptop-mod

  • Error while accessing the admistration console at Port 1810

    I am using 9ias 902. When I try to access the Administration Console I am getting the folowwing error. java.lang.NoClassDefFoundError at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:195) at com.evermind[Oracle9iAS (9.

  • Why is icon in the url field indicating RSS availability no longer showing?

    Why is the RSS Icon indicating RSS availability no longer showing besides Firefox's URL field when I know the feature should be available on the website? It shows up in Seamonkey for the same site. I'd like to subscribe in Firefox, but can't.

  • Problem creation of variable

    Hi all, I've got a little problem in BEx. I'm trying to create an offset. For that, i created a new variable on 0CALMONTH, with replacement path with tha variable of 0CALMONTH : "0I_CMNTH". But when I put this variable, the following error appears :"