Ipod nano froze and emits high pitch buzz.

I placed the ipod nano on my dock. It turned on and began buzzing. I cannot get it to go. I connect it to itunes, try to reset it with the ipod software and nothing.

I did it.
If your nano ever freezes here is the way to reset it.
http://docs.info.apple.com/article.html?artnum=61705

Similar Messages

H67MA-E35 (B3) emitting high-pitched whine/chirp

I am getting a high-pitched whine or chip coming from the bottom left area of the CPU/Heatsink. It isn't the fan, as I have stopped the fan and it still makes the noise. I was also able to correlate the vcore voltage with the noise. The noise is only present while the vcore is below 1.000v. After throttling over 1.000v it goes away. I am using a i5-2500k. I am not overclocked anything and made very few changes to the Bios (just boot order and things like that).
Is this a problem with the socket, northbridge, or some other part on the board? Or is this a problem with the power supply not supplying the right kind of voltage? Or is the computer throttling too low? Like how a car doesn't run properly if idling too low?
Thanks in advance,
m@
System Specs
VGA:onboard MB:MSI H67MA-E35 (B3) LGA 1155 Intel H67 Micro ATX OS:Win 7 64bitCPU:Intel Core i5-2500K Sandy Bridge 3.3GHzSound:onboardMemory:CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333PSU:OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 HD:Western Digital Caviar Blue WD5000AAKS 500GB 7200 RPMCooling:retail with CPU

Quote from: dilburt on 21-March-11, 08:05:56
No, this is a very common issue with chokes since a choke is very similar to a buzzer or speaker coil so if it's a bit loose, it can vibrate and emit high-pitched sounds. It will not damage anything by itself so if you can get it to stop using settings that are otherwise safe then there is no need to worry about it.
- D
I believe this is more common with iron chokes. The ferrite chokes used on this motherboard are far less likely to buzz. I did look at the board photos and it looks like the CPU PSU is standard FET transistors. Hmmmm.

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy

IPod making high pitched buzzing noise

I've had my iPod over two years now, maybe three but it's always worked and hasn't had any problems. The other day I connected it to a cheap second hand Pod station that a friend had been lent. The pod station wouldn't play my iPod and nothing much happened so I resolved that my iPod was just too old to work on it and took it back out again. When I tried to turn on my iPod afterwards it wouldn't do anything so I thought that the battery had probably just been drained out and it would be fine when I took it home and connected it to my computer.
However when I did so the iPod did not appear on the desktop or in iTunes and the screen remained blank. I kept trying but the same would continue to happen and I began to notice that now whenever I plug in the iPod a very high pitched buzzing noise comes from the iPod which scares me a little as it's so unusual. I have tried resetting and pretty much all of the suggested solutions on the apple site and in other discussions but none work. Nothing seems to work and the iPod does absolutely nothing. Is there anything at all that I can do or does this mean that my iPod has simply finally had it?
I wouldn't have thought that just a cheap Pod station would be enough to cause such a major problem with it.
Any help would be very much appreciated please!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
http://www.rapidrepair.com/shop/g4-ipod-parts.html
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

My droid razr m suddenly developed a high pitched buzz while ringing and when callers are speaking. It doesn't buzz while on speaker. Any one have same problem or a solution to it?

My droid razr m has developed a high pitched buzz while ringing and when callers are speaking. It does not buzz when on speaker. Anyone have this problem or a solution to it?

Teakman lets make sure your device is clear as a whistle! There is not a known audio issue with the Droid Razr M so it appears this may be an hardware defect with the device. To make certain that's not an internal issue, I would recommend completing a Hard Reset http://vz.to/1kEchad .
AshleyS_VZW
Follow us on Twitter @VZWSupport

High-pitched buzzing in all songs

Tonight I was ripping CD's onto iTunes and was, I thought, being successful. But when I tried to play a song that I had just ripped, there was this high-pitched buzzing noise. It was like that on basically all of the ones that I did after a certain point. Is there a way I can fix this without having to rip all my CD's again? Why did it do this?

No, not all of the songs have that in them. I ripped 3 cd's then after those the buzzing occured. I didn't install anything inbetween that. I'm thinking though that it had something to do with the one of the cd's that needed to have certain programs installed for it. I put it in and shut down the stuff that popped up. From what I remember the cd's I ripped after that are the only ones that are messing up. So I'm assuming that's what happened. If not then I have no idea. I haven't tried it again.

Satellite L850-1R4 - Freezing with high pitched buzzing sound

Greetings.
I obtained this computer from my school, it was packed and not opened as far as I know(to my knowledge they didn't open 'em at least.) Around 5-6 times every day (Span of 6 hours at least) my computer freezes, with a very high pitched buzzing sound that sounds like a bloody drill.
I updated my drivers and everything, but this still occurs and I have to power restart the computer to be able to continue working/playing/watching anything.
How can I solve this?
Thank you and best regards.
Berkcan S.

> Furthermore If I take it to factory settings (which I tried some months back) It gives me further crashes, freezes and blue screens.
Sorry mate but for me it sounds like an hardware problem. BSOD can be caused due serious software issue (compatibility between driver and hardware) or hardware malfunction but setting the unit back to factory setting should not cause an software issues. Therefore I presume an hardware part is the troublemaker.
The common parts like HDD or RAM modules should be checked firstly following by motherboard, CPU, etc

W700 high pitched buzzing

Just recently updated all the drivers with the systems update, after reboot a high pitched buzzing started. The pitch of the buzzing changes when I adjust the brigthness level on the monitor too.
Rolled back the driver for the graphics card and still had the buzzing sound, I am assuming its from the power managment driver update. Anyone have the same problem?
Anyone know a link to the default power manager driver?

No, not all of the songs have that in them. I ripped 3 cd's then after those the buzzing occured. I didn't install anything inbetween that. I'm thinking though that it had something to do with the one of the cd's that needed to have certain programs installed for it. I put it in and shut down the stuff that popped up. From what I remember the cd's I ripped after that are the only ones that are messing up. So I'm assuming that's what happened. If not then I have no idea. I haven't tried it again.

Why is it we only can buy 2nd generation ipod nano acessories and none 1st

hi uhm yea i dont like it how u only can buy acessories for the new ipod nano's and now nothing for the original ipod acessories and just to let u know apple ur cord to hook up the ipod to the computer are way over price i can get one for $5.00 and uhm yea thats all i wanted to say
7M552265TJT Windows XP

Hello and Welcome to Apple Discussions.
You can still buy iPod Nano 1G accesories (Go to Apple Store > iPod Accessories > Previous Models > iPod Nano ). Of course the vast majority of accesories will work on both 1G and 2G Nanos. There is just half a millimetre difference in thickness of the Nano and the dock connector/ headphones are nearly in the same place it's only a few cases that won't work.
Yes you can buy cheaper products elsewhere. However, my experience of Apple gear over the last 15 years is that it lasts longer and performs better.
regards
mrtotes

Formatted my new iPod Nano 4Gb and my application can't find the Device ID

Hi,
Just bought a new Nano 4Gb, updated it to 2006-06-28 (1.2) and of course it couldn't be recognized by Windows after that. Followed the instruction and formatted the Nano and made a Restore, worked fine!
Now to my problem, when using my application Anapod Explorer (from www.redchairsoftware.com) it can connect to the Nano but it says the iPod don't have any Device ID so it can't authenticate to the iPod...
Anyone more who is using this superb software?
It seems like if some information is missing in the iPod after the formatting of it...
Please advice!
Best Regards

Additional Information:
Since some information seems to be missing on my iPod Nano 4Gb I compared the files with my iPod Video 60Gb.
Comparing the directories: [driveletter]:\iPod_Control\Device
on my iPod Nano 4Gb and my iPod Video 60Gb
iPod Nano 4Gb:
The file SysInfo is empty, containing no data when opened in Notepad.
iPod Video 60Gb:
The file SysInfo is of 1KB and another file named "_unlocked" is present.
The information in the SysInfo file is:
BoardHwName: iPod M25
pszSerialNumber: JQ6040HFTXL
ModelNumStr: MA147
FirewireGuid: 0x000A270014E1CDBA
HddFirmwareRev: BU011A
RegionCode: S(0x0006)
PolicyFlags: 0x00000001
buildID: 0x06128000 (6.1.2)
visibleBuildID: 0x01128000 (1.1.2)
boardHwRev: 0x00000000 (0.0 0)
boardHwSwInterfaceRev: 0x000B0005 (0.0.11 5)
bootLoaderImageRev: 0x00000000 (0.0 0)
diskModeImageRev: 0x00000000 (0.0 0)
diagImageRev: 0x00000000 (0.0 0)
osImageRev: 0x00000000 (0.0 0)
iPodFamily: 0x00000000
updaterFamily: 0x00000000
I have done the diagnstic test on the Nano and there are no errors and the iPod Nano is functional but I can only use iTunes to load it with music, I can't use the wonderful Anapod Explorer.
Another thing:
When connecting my iPod Video to my computer it shows up with a drive looking like an MP3 player, when connecting my iPod Nano it shows up looking like an ordinary disc drive.
Best Regards
Windows XP Pro

I have an ipod nano 4GB and use pc windows xp . since last year my ipod didnt sync any new songs saying "the ipod cannot be synced the required folder couldnt be found" and when i try to update the itunes version another error occured. plz HELP!!!!!!!!!

I have an ipod nano 4gb and use pc with windows XP. since last year my ipod suddenly didnt want to sync any new songs saying " the ipod "MOAMEN" cannot be synced. the required folder couldnt be found" and when i try to update the itunes version another error occurs and i dont know when i tryed to format ipod i didnt find "format" button. so plz give me suggestions instructions i extremely bored !!!!!!!!!!!!!1

Uninstall/Reinstall iTunes then try to rebuild the library.
http://support.apple.com/kb/HT1925 (uninstall/reninstall)
http://support.apple.com/kb/HT1451 (recreate library)

Ipod nano 4gb and car audio

Hi everyone, I've got an iPod Nano 4gb and am a little confused as to what is required to connect this device to my factory installed cd player. I drive a 2006 Nissan Frontier Crew Cab and have the basic factory audio system. I spoke with the dealership where I purchased the truck and they said that I need an interface and harness for $400 + labor. I don't think that is an option for me -- way too expensive.
What exactly is need to connect my iPod Nano to my truck's audio system? Do I need to purchase a new audio device that supports the iPod?
Thanks

The following website will list different types of car audio devices made for iPods. I hope it lists something that may help you.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=567 F5736&nclm=iPodCarAudio

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices

I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices. Help please

The ipod is not a backup/storage device.
You need to copy everything from your old computer to your new one.
The Apple store will do this for you, you can call apple support and they will help you, you can use google.

Ipod nano froze and emits high pitch buzz.

Similar Messages

Maybe you are looking for