IPod nano g6 keeps flashing on when turned off and it lo

Whenever I wear it (It's a watch i ordered the iwatch strap) and turn it off (I'm not playing music), it flashes on after 30 secs and it keeps doing it over and over. Then when i checked it after 2 hrs (or was it 1?), and it was completely shut off. Please help? (it won't flash on when i put earphones on and music plays, but i just want to wear it around (without playing songs) casually without it running out of battery quick.

This only happens "Whenever I wear it"?  So, if it's sitting on the table, it does not happen?
If movement is causing the problem, maybe it's the Shake to Shuffle feature misbehaving.  Try turning it OFF in Settings - Music to see if it makes a difference.
Do you have any headphones with remote control buttons on the cord connected when this happens?  If so, if you connect a different set of headphones (any type), does it still happen?

Similar Messages

  • Should iphone 4 receive messages when turned off and display them when switched back on

    should iphone 4 receive messages when turned off and display them when switched back on

    It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
    So generally speaking, a few minutes after you turn your iPhone on, your messages should display.  Similarly, your voicemails would arrive.

  • My 4s camera flash light wont turn off and camera is not working

    my 4s camera flash light wont turn off and camera is not working

    Hello there, Shantae2231.
    You may just want to try resetting your phone per the instructions in this Knowledge Base article (There is no data loss by performing this step):
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My Ipod is showing the loading sign while turning off and its frozen there.

    My Ipod is showing the loading sign while turning off and its frozen there. My computer wont reconize it either. My Safari didnt work so I thought that I will turn it off to see if its working after and it just gotb stuck in the loaeding sign while turning off.

    Try here:
    iOS: Not responding or does not turn on

  • Ipod nano 7th keeps flashing and won't turn on

    my ipod nan 7th generation is flashing on the blue screen and I can not turn it on...

    Hi peggic,
    It sounds like your iPod Nano isn't functioning properly. I have located an article which you may find helpful. It contains a series of troubleshooting steps you may want to consider:
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    Thank you for contributing to Apple Support Communities.
    Take care,
    BobbyD

  • Ipod nano 4g works good as locked. turns off when unlocked

    works good as locked. turns off when unlocked

    If you have the Hold switch ON and it's connected to power, the iPod is ON...  What happens when you disconnect it like that?  Does it stay on for any length of time?  Does it immediately turn OFF?
    If it immediately (or within a few seconds) turns OFF, I'm not sure what's going on with the Hold switch, but your battery is probably worn out and not holding a charge. 
    If it stays ON, you are saying it will turn OFF if you move the Hold switch to the OFF position?

  • 2600 classic not keep settings when turned off and...

    I bought my 12 yr old daughter a Nokia 2600 classic as her first phone, and it won't keep her display or theme settings. When she turns phone off and back on the settings are back to originial (default)?
    Is this becaiuse we are not unsing it right.
    Do I take it back under warranty?

    have you tried to create a profile then activate it this was a common fault with the nokia 6500 due to loose back cover and storing items on memo  card but thisphone does not take a memo card
    try taking out the battery for 5 mins then a factory reset,the code is 12345 then create and activate a profile.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • I have a iPod nano 3rd generation. I accidentally turned off the backlight so there is no screen showing

    What are the steps to go to the backlight in settings and turn it on?

    The screen is still showing.  If you bring the iPod near a bright light, or shine a flashlight on it, you will be able to read the screen with no backlight.
    On my 5th gen iPod nano, it is
    Settings -> General -> Backlight -> [select setting]

  • HT201269 5c wont keep screen settings when turned off overnight.

    Hi all,
    I got my screens arranged using itunes so all the apps are where I want them. I turn the phone off at night, and when I turn it on in the morning, they are back where they started. Am I doing something wrong??
    Regards Paul.

    Why not leave the phone on? It'll just go into a sleep state. You aren't gaining any advantage by turning it off and you can keep your home screen the way you want it.

  • My C5500 keeps on saying to turn off and lights flash all the time

    Hi, My C5500 printer keeps saying to turn off power and lights are blinking? Should I uninstall and re install? What happens to info already on the computer?
    Thanks,
    T

    Hi Tinkerbelll,
    I understand that you are having an issue with the printer. I will try my best to help you resolve this issue. In this document for 'Turn Power Off then On' Message Displays on the Control Panel there are steps to clear this error.
    Let me know if this helped or if you need further assistance.
    Thank you,
    I worked on behalf of HP.

  • My ibook loses battery power when turned off and unplugged

    I have been puzzled by this since November 2006. I calibrated my battery twice as prescribed and still, as soon as i shut down my ibook and unplug it, it's battery charge goes down. Why is this? I'd greatly appreciate help. I'm a former pc user and none of my pc laptops have this problem. I just want to know why my battery loss power when unplugged and turned off. thanks in advance

    Well you might want to try what they call "battery reconditioning" which is 7 simple steps listed below:
    1: Charge your iPod fully.
    2: Use it till you cant trun it on anymore!
    3: Then carge your iPod fully again.
    4: Then Use it till you cant trun it on anymore!
    5: One more time charge your iPod fully.
    6: And then again Use it till you cant trun it on anymore!
    7: Then one last time charge it fully again.
    Reminder: it is best to let the battery die all of the way each time inbetween chages. for example if it has 60% battery life dont charge it use it till it is dead and then charge it up all the way!
    *This should inturn maximise your battey life also!*

  • Screeching noise when turn off and message comes

    Does anyone's iPad make a screeching noise when turning off

    No. And what does "message comes" mean?

  • Ipod nano 6 keep getting error when trying to sync ipod with itunes. Cannot copy cos cannot be found. Latest versions installed

    I have had the ipod for some time and am not having a problem with the iphone or ipad. I have reinstalled the itunes and real time but am still getting the following message: Some of the tunes in the itunes library were not copied to the ipod because they cannot be found. 100+ problems - keeps selecting different tunes.

    Hi Jullo59,
    If you are having issues with iTunes being unable to locate files, you may need to rebuild the iTunes library. The following article may be helpful:
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Cheers,
    - Brenden

  • My iPod nano 6g keeps skipping song. Tried rebooting and restoring?

    I've tried everyhting I can think of. Please help? Really annoying as it's only done it once before, and suddenly started doing it when iTunes updated it!!

    If you go to the about screen in settings, what version does it say you are running?
    Does this only happen on specific tracks? If so, get info on those tracks and post the info here.
    Are you using a headset that has controls on the wire?
    Has the Nano gotten wet recently?
    i

  • Rebooting when turning off and percentage problems

    i have downloaded 3.1.3 and since then when i turn my iphone on in the morning my percentage will show the wrong amount, then when i unlock it a second later it will jump to the right percentage, an example is this morning i knew it was at about 45% but i turned on the iphone and it said 19% and a warning flashed up that i was at 20% then when i unlocked it it jumped back to 45%, it is so annoying..also it reboots when i turn it off at night which ruins my usage and standby times..and yes i have tried everything even restoring to a new iphone..anyone else having this? im going to send feedback i urge everyone else too.

    Hi John, and welcome!
    The unclear forum labeling around here led you the forum for the late-model G4 minitowers. Fortunately you found Niel, who is an awesome Mac guru. To help you through the weird forum navigation for future inquiries, here is a direct link the the Powerbook G4 12" section; they rate their very own forum.
    G4 PowerBook Aluminum case 12-inch Forum

Maybe you are looking for

  • Can't move rented movie from itunes to Apple TV (1st gen)

    I have rented a movie through iTunes but cannot transfer this to my Apple TV (1st gen). I have tried dragging and dropping the movie into the Apple TV device section on iTunes but it won't allow me to do this. I have tried syncing and this has made n

  • Field on Document Header using BAPI for posting

    Hi there. I need to fill the BKPF-BRNCH field (the Branch Number header field in transaction FB01) to post a document by means of the BAPI_ACC_DOCUMENT_POST function module, but I haven't find the field in the DOCUMENTHEADER table, and I can't figure

  • Web Pass-Through Does Not Redirect

    We have an issue in which when a client connects to the guest/pass-through WLAN, it does not automatically redirect to the "accept" page. Instead, it only works if you manually input an IP address into the web browser which will then bring up the "ac

  • Preveious versions of iTunes for Windows?

    I was running previous versions of iTunes for Windows without problems. With the latest versions, I have tried everything without success (uninstalling Quicktime, resinstalling Quicktime etc) Are the install files for prior versions of iTunes Windows

  • Laggy video on Chrome.

    Since the 11.4 update everytime i go to watch a video on any stream site i get laggy videos in full screen is there any update? I am running google chrome. And yes i have tried the turning enhanced thing off.