IPod nano had unexpected error syncing

Hi
Yesterday whilst syncing my iPod Nano 5G with iTunes 10.3, I recieved an unexpected error message from iTunes telling me that nine files had corrupted and that my device needed to be restored. I have not restored the device yet but now whenever I connect my iPod to my PC windows asks me to scan the device for corrupted files and iTunes asks me to restore.
If I Restore the iPod will I lose the built in games that were on the device when I purchased it or any other important data which can't be retrieved afterwards?
Thanks

Update: After again repeating the 5Rs (instead of re-install, downloaded latest version of iTunes which prompted for "repair" rather than "install"), a message asking me if I wanted to update my iPod software came up. I accepted, and following the install was able to sync without the "corrupted" message. Of course when the sync was finished, I tried to play my iPod and noticed that there was no music on it (so in fact the sync hadn't really worked). Since then, all I get when connecting the iPod is the "corrupted" message, even after another reset.
Suggestions?

Similar Messages

  • How do I get itunes 11 to sync my ipod nano? Itunes error message says ipod cannot be synched.

    My ipod is recognized in Windows but itunes won't synch thwe ipod nano. An error message says "The ipod "name of my ipod" cannot be synched. The required folder cannot found. The first time I downloaded itunes 11 it didn't install but it completely uninstalled the previous itunes. I've reinstalled and removed itunes 11 several times but nothing changes. Waht do I do?

    You don't.
    Itunes 11 is a program for your computer, not your iphone

  • My new iPod nano replacement isn't syncing with all my songs...

    Like the title say, my new iPod nano replacement isn't syncing with a number of my songs. They aparently aren't the correct format, however they range from imported CDs to purchased music from iTunes... They all appear to be the same 'kind'. Infact, it looks like none of my library has synced. What could be causing this? (The library worked on two different iPod touchs and the 1st gen iPod nano)
         Thanks guys!
    -- I had an idea shortly after posting this to restore it to factory settings... It seems to have fixed it.

    Theis is the iPod touch forum. I requested moderator move your post to the Nano forum.
    BTW, my 7G Nano synces fine with my WIn 8 PC.

  • My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

    My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes.  When I plug my ipod into my imac, it does not even read or recognize my ipod.  What do i do?

    Are you using the original cable that came with Nano and not your iPhone's cable?  Have you worked through the troubleshooting in this Apple support document?
    http://support.apple.com/kb/TS1410
    B-rock

  • I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

    I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

    If I go from 'Devices' to Summary and then Music, I only get one option-Sync Music,There is a box on this page but the options within it are grayed out. If I tick the Sync Music option I get this message-
    'Are you sure you want to remove existing music,films,ect, from this ipod and sync with this itunes library?
    'Music synced to (my ipods name) from other itunes libraries will be removed and items will be synced from this itunes library' I have only ever used itunes on this PC and the 'Manually manage music and videos' is ticked but
    that must be a default setting as I haven't ticked it.

  • Ipod nano gets unknown error -48 when trying to restore

    Hi All
    My Ipod nano gets unknown error -48 when trying to restore and download the software update. Specifcally, when I connect my ipod, I get a message saying itunes cannot access the ipod and that I should restore it. I go the the ipod tab, hit the restore button and the download begins (approx 16mb). The download completes, and then I get this message :
    There was a problem downloading the ipod software for the ipod "ipod". An unknown error occurred (-48).
    Please help !!!!!

    Even though not specifically listed, try the steps here:
    http://support.apple.com/kb/TS1372
    If you know someone with an XP windows machine try the reset utility on their computer.

  • Ipod nano wont restore~error 1433, ipod nano wont restore~error 1433, ipod nano wont restore~error 1433

    my ipod nano wont restore ~ error 1433 what to do

    Hi, got the same problem as kerry221. The proposal given by stevejobsfan0123 did not solve it.
    Additionally iMac does not shut down after closing iTunes. Need to manually shut down the iMac.
    Problem occurred after last software update.
    Open for any further proposal :-)

  • My ipod classic had an error of 1439.It finally let me restore it and now it says it cant restore because of error 1439. why?

    My ipod classic had an error 1439. It finally let me restore it and now it says error 1439 again and wont let me update my ipod. Why?

    Hey there Palmer
    How are you?
    Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
    I did the following:
    My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
    The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
    It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
    Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
    Finally, after the file extraction was done, it began to restore the iPod!!
    I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
    Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
    If it works for you, make sure to share the tip!!
    Kind regards
    Salvador Rivera

  • TS1363 i have the new iPod nano? but wont sync to my home pc?

    i have the new iPod nano? but wont sync to my home pc? it connected then tells me i have to disconect then also re connect after?
    but never gets any further?

    If you mean that iTunes does not see your iPod:
    - Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    - Try another cable
    - Try another computer
    - Make an appointment at the Genius Bar of an Apple store.

  • My ipod nano 6th is not syncing

    HI need help with ipod nano 6th gen, not syncing?

    Videos are not compatible with a 6G Nano.  Sorry.
    B-rock

  • I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

    Did you also check under Albums?  All Songs?
    iPod Nano 5th Gen. User Manual

  • New iPod Nano gen7 will not sync

    Some backround info;
    My iMac 27" harddrive was recently replaced (11/2012) by Apple because they said it was defective (replacement was covered by AppleCare).
    I have recently purchased an iPod Nano gen7 and connected it to sync with my iTunes library.
    My iMac is running OS X 10.8.2 and my iTunes is running Ver. 10.0.2. The iPod Nano gen7 is running Ver. 1.0.2.
    My iPhone 5 and iPad 4 both installed prior to my harddrive repalcement are syncing all of my tunes from my old hard drive and tunes added after the harddrive was replace. My complete iTunes library runs from 2007 to present day and is stored in the iCloud.
    Listed on my iTunes account, iTunes in the Cloud under Manage Devices are 1) My iMac, 2) My iPhone, and 3) My iPad, Missing is my iPod Nano.
    On my Itunes page listed undet "STORE" is a listing called PURCHASED that only shows tunes purchased since my harddrive was replaced.
    My problem is that my just purchased iPod Nano gen7 will only sync tunes installed since my harddrive was replace, non of my tunes from my old harddrive.
    How can I get iTunes to sync all of my iTunes library to my iPod Nano gen7.
    Any and all help will be appreciated.
    BillT

    I have the Same problem we always have this with tech in our house! I came to find this problem after using a faulty socket box, I hadn't noticed that while my iPod was charging in my Belkin USB Adaptor that the Red Light on the Adaptor was flashing (Power On and Off) consistently because of the power not getting through to my adaptor, so while reading my tech magazine there was a rather loud 'BANG' so as you do you go and have a look so I pushed my charger in to the socket harder and the light did not come up on my iPod or my Adaptor meaning that something was wrong with the adaptor... So I checked my iPod and it would not switch on or do anything for that matter!
    Please help me on this one guys, i'm not usually the one struggling with tech!
    (I'm using a Mac not a PC)
    (I'm using a Mac not a PC)

  • My iPod nano had got in water. can i fix it?

    my iPod nano had got in water. can i fix it?

    Put your iPod in a warm place (an airing cupboard for instance) and let it dry out naturally for about a week (I seen a few tips on this such as placing it in a bowl of uncooked rice to help the process along). Do not connect it to your computer or any other power source during that time. After that charge it up and you may, I stress may be fortunate enough to get it working again.

  • I lost my itunes after syncing and older iphone to my powermac g4.  Originally I had an older ipod nano that I would sync to the g4 and everything was fine. Lost itunes music even though preferences had been set in advance for not automatically syncing.

    My itunes library had been fine.  I had been using an older ipod nano to sync with my itunes library and had been doing manual syncs, with the preferences in itunes set for not allowing "ipods or iphones" to sync automatically.  I found out that apple had a program to replace the battery on this older ipod nano, so I sent it in.  It was great, they didn't have an exact replacement and sent me a later ipod nano.  However, this ipod nano is so new - I will have to get a newer computer with a later operating system to use it.
    So, I thought I'd use my old iphone to listen to my old playlists.  I thought the preferences were set for not automatically syncing iphone to itunes.
    I've had problems in the past with the syncs with this iphone and my computer because of the USB port (1.1).  I'm thinking this was the problem.
    The apple store did something to update the software on my iphone when it wasn't working one day. I think that when I tried to sync the iphone to the g4 cube via the old port (1.1) it basically wiped out everything on my itunes.  Whatever was my selected playlist for my iphone - that was the only music
    that remained on my computer and the iphone.  I only had about 20 songs purchased on my library, but alot of music that had been downloaded, I gave away those original cds.  I did have a back up on my external drive, but that thing died a few weeks ago from some random power outtages we had this fall.
    I'm not looking to purchase retrieval software or have some outside third party to retrieve it for me.  It's not that much music lost.  I just wanted confirmation that this is what happened: that my old iphone sync is what erased the music.

    The old iTunes library was lost with the old PC.  However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
    Your iPod is designed to sync with only one iTunes library at a time.  It will recognize the iTunes library on the new PC as a new library.  If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library.  So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • IPod Nano 3rd generation error -50

    When attempting to sync photos into iPod Nano , unexpected error -50 occurs, and is unable. We have latest version of iTunes 8.2 (23).
    What do we do??

    Hey there,
    I would try trashing the iPhoto Photo cache to the trash because it may be corrupt and see if that helps. Instructions on how to do this can be found in the Apple support document below. Hope it helps.
    [Photo Sync creates iPod photo Cache|http://support.apple.com/kb/TS1314]
    B-rock

Maybe you are looking for

  • NTFS permission problem keep showing when I try to repair the disk permissions

    Hi guys, After i install the Paragon NTFS 11.2.443, I found that the serial number I had failed to register it so I uninstall it. Now, I keep getting this when i repair my disk permissions. Repairing permissions for "Macintosh HD"Permissions differ o

  • Search criteria in Transaction

    Hi..     can we customise the search criteria in a busoness transaction?    if yes what are the config steps that need to be done...?     regards, sanjana

  • GLOBAL_NAME

    Hi, If we set the GLOBAL_NAMES parameter to TRUE, then we have to give the dblinks the same name as the remote database. That is the fact. But a dblink is a connection to only a schema for the remote db. If I have to create multiple dblinks to multip

  • Audigy 2 ZS drivers & 5.1 Medusa Head

    I believe I require an older OEM cd image- or just an older driver- for my Audigy 2 ZS, because the one off of my OEM CD (5.2..442) is right behind the latest version (5.2.2.444), and neither are compatible with my Medusa headset (tons of noise disto

  • Can someone read my crash log & see why DSP crashes just before burning????

    i have allll the latest versions, including the pro apps stuff, trashed preferences, reset all settings, verified permissions, purged pram, rebooted, rebuilt the entire project,etc. etc...everything anyone knows to do, yet after build and format, jus