IPod Nano has no sound

Hi,
I have a second gen iPod nano that was bought off eBay for Xmas.
I have downloaded some songs onto it but get no sound - not even the clicker sound.
I have tried the 5R's with no luck. I have also tried different headphones, playing through speakers and computers etc. and still get no sound.
Can anyone help?

Sounds like a problem i had with my U2 Special Edition ipod when i had it. Except i could play sound in Ipod Stattion/Speakers/Docks. It sounds like your Ipod Jack has got a problem and isn't working The little whole where you plus earphones/ipod into places either that or have you checked all the settings/volumes on the ipods?
If it has warrenty take ot back to Apple is all i can suggest.
Rach

Similar Messages

  • 6th gen ipod nano has white screen and won't go into disc mode

    My ipod nano has a white screen - it will play music, and it is recognized by itunes. It won't enter disc mode. I can't seem to find any other helpful steps to follow online other than put it into disc mode and restore it via itunes. When I attempt to put it into disc mode holding power/Vol down together the screen will turn back, but when I then hold down Vol down/Vol up together while the screen is dark it just goes back to white screen. I did plug it into the computer and restore it via itunes, and the screen is still white.  Any ideas?  Thanks!

    Hi LizS5,
    It sounds as if you have already done much of the troubleshooting suggested in this article, but I would suggest you work through it in order to get your iPod nano back up and running -
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Specifically -
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    And if the issue is not resolved -
    My issue is still not resolved. What do I do next?
    For information on servicing your iPod, go to the iPod Service FAQ
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • 5g ipod nano 8GB no sound through ear buds or headphone jack only when docked.

    5g ipod nano 8GB no sound through ear buds or headphone jack only when docked. any suggestions? i don't want to replace any of the parts inside if at all possible.
    I have a 5th generation 8GB iPod nano. I bout it off of eBay in May of 2010 and it has worked great until now (Apr 2011). The 5th gen plays music through the headphone jack even when no ear buds are plugged in. I was using it one day and it just stopped. I tried resetting it manually and automatically and I tried reinstalling iTunes. Nothing has worked. Now it won't even play sound though the ear buds (or the aux hook up in my car), only when it is docked to my iHome. Does anyone have any suggestions? I dont want to replace the iPod or any parts inside if at all possible. ANY SUGGESTIONS ARE WELCOMED! THANKS!

    Headphone jacks are only good for so many in and out usages.  Usually its the headphone jack itsefl that goes bad first but sometimes it is the internal part.  If you are lucky you can clean out the inside and get it to work.
    These devices are not made to last for someone who actually has those headphones around there neck and acually uses there listening devices through out the day plugging it in and out.  This is not in any way an Apple thing, it is a problem with many devices.  The male ends tend to get dirty hanging around then scratch the female end when used.  In fact, using higher end headphones you can really notice even the smallest particles of dust on the male end of plug when used, that is the small popping you might notice when the cord moves.
    Hopefully its a problem on the male side of things. 
    I would recommend a person that wants to use headphones alot to keep a small 2 inch extension plugged into there device that can be replaced when it goes bad inplace of wearing out the original plug.
    Again, this is not an Apple problem alone.

  • Can I connect my Ipod Nano to my sound system with amplifier

    Is it possible to connect my Ipod nano to my sound system which has an amplifier. If so any problem will occur to my ipod nano.

    The usual way of doing this is to buy the universal dock, then use the line out jack on the dock to connect to your amp via a cable that has a mini jack (like the one on your headphones) at one end and 2 RCA phono plugs at the other end (to connect to line in sockets on your amp).
    You can do this direct from the headphone socket on the iPod instead of buying the dock, but personally I don't think the sound quality is as good this way.

  • My iPod touch has no sound from music and videos help please

    My iPod touch has no sound at all, help please guys.

    - The restore from backup
    - If still problem restore to factory defaults/new iPod.
    - Last, make an appointment at the Genius Bar of an Apple store.

  • Does the ipod nano can record sounds?

    Does the iPod nano can record sounds connecting "headphones with microphone"?

    Hi uptight,
    Yes, the iPod Nano does support MP4 files.
    You can find more information about the files the iPod supports here: http://www.apple.com/ipodnano/specs.html
    You can convert many videos right from iTunes. This article: http://support.apple.com/kb/HT1211 will walk you through the process with sample files.
    -Jason

  • My ipod nano has stopped shuffling and won't re-sync

    My ipod nano has stopped shuffling and won't sync to begin shuffle again

    http://www.apple.com/support/ipod/service/prices/ look up your model and country and if your willing to pay that much im not sure how you go about getting it done,
    Hope this helps,
    Quin.

  • My ipod nano has stopped being recognized by my mac computer

    My ipod nano has stopped being recognized by my mac computer, it used to work and all of a sudden it isn't, please advise...

    Hi there,
    You may find the troubleshooting steps found in the article below helpful.
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    -Griff W.

  • My iPod nano has a lock on the screen.How can I unlock and use my nano?

    My iPod nano has a lock on the screen. How can I unlock and use my iPod?

    Do you know there is the lock/unlock thing on the top or bottom right? If that doesn't work, hold down the middle circle and top portion of the circle button at the same time and hold until the screen goes black. Let go and soon an apple will appear. If you wait / press some buttons (i am not sure exactly how this part works) it will turn white and then the screen will appear again. You have all your music and everything still but the problem should be gone. This also works if your iPod ever freezes.

  • My 7th gen ipod nano has an echo when reading audio books

    My 7th generation ipod nano has an echo when listening to audio books. How do I fix this?

    Hi ipoduser2013-,
    Welcome to Apple Support Communities.
    I'd first try to reset the iPod:
    Reset iPod nano
    http://www.apple.com/support/ipodnano/assistant/itunes/#section_4
    Cheers,
    Jeremy

  • HT5521 MY USB cable has a error message UNknow Devise and my IPod Nano has stop working as I was downloading Itunes

    MY USB cable and Ipod Nano has stop working while I was dowloading a CD to  from my computer to Itune.  Error message is a Unknows Devise.  Unable to turn on Ipod nano

    Hello hjoan
    Check out the article below to troubleshoot issues with your iPod showing up on your computer and in iTunes. It will give you multiple options on troubleshooting the issue.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Regards,
    -Norm G.  

  • My Nano has no sound when connected to car stereo USB

    My Nano has no sound when I connect it to my car stereo USB.  The display works though

    Why don't you try changing the input on the car stereo? I have a '13 Honda Odyssey and whenever I plug in my 7th gen nano I have to press a button labeled "USB/Aux" to switch to the Nano. I would also make sure to check that it is nano compatible, that the volume is up and that the stereo is on. Not to make you sound dumb, but you honestly might feel that way if you had the stereo off, I know I would (and have!)

  • My 2nd generation ipod nano has been stolen.  Is there any way to locate it? (like you can the newer ones)

    my 2nd generation ipod nano has been stolen.  Is there any way to locate it ?  (Like you can the new ones)

    No.
    (67005)

  • IPod nano has odd spots on whole nano

    Hi, my friend's iPod nano has an iPod nano that unfortunately is oddly covered in spots that he described as this: they are on the outside of the screen...around it...and they just look like smudges from lint or dirt but they will not come off same on the back. Please help! Thankyou!

    You should try calling apple support open that one they should be able to help you the number is 1-800-MY-APPLE just don't be a jerk and get impatient because they can screw you over and not even care.
    David

  • My ipod nano has blank screen

    my ipod nano has just got a blank backlit screen and wont do nothing else?

    tk from sligo wrote:
    Same thing has happened me. ipod nano 6th gen blank screen shows in itunes tried resetting - What is going on?
    See my response in the following thread: 
    https://discussions.apple.com/thread/3154887?tstart=0 

Maybe you are looking for

  • Apple id is not allowing me to use my gmail  email address, can anyone help?

    why can is my personal gmail address not accepted when I try to use it to create an apple id?

  • Changes in the Dimensions not reflected in the Current View and Excel Sheet

    Hi Experts, We're using BPC MS Platform Version 7.0.112 and we're having problems. When we make changes in the dimension members like adding members or making changes in the hierarchy or groupings, it takes time for the changes to reflect in current

  • Transferring gallery from SD - E51

    Can anyone tell me how I can transfer the gallery stored on the SD card to the phone memory? Or, how do I view the gallery from the SD?

  • Illustrator and Java SE 6

    I recently purchased the Design Standard CS6. When I tried to launch Illustrator today I got a message that I need Java SE 6 runtime to operate it. In trying to download and install, I got an error message that said there were network problems. [I ha

  • Web logic siebel jms messaging

    Hi, We are trying to implement jms messaging to transfer data from siebel to an external database...using the following architecture: 1. create jms queue (web logic web server) 2. use EAI JMS transport business service in siebel to send data to this