IPod nano hold icon stuck!  What do I do?

My iPod nano shows a lock icon on the screen, even after the hold button on the top of the iPod is moved to the unlock position, and I cannot access any iPod controls. How do I unlock the hold icon and allow the controls to be usable again?
iPod nano   Windows XP  

superman actually just helped me with this one
just let the battery run out then plug it in to charge. you'll know when the batt. runs out because the screen will go dark. although now that my controls are back itunes isnt reading that my ipod is plugged in and i cant update my ipod. let me know if you have the same problem.
Dell   Windows XP  

Similar Messages

  • My 4th gen Ipod nano keeps getting stuck on the apple logo.

    My 4th gen Ipod Nano keeps getting stuck on the Apple logo screen, this happens everytime I plug it in to charge. I plug it in, an apple logo comes up, and it stays like that the entire time its plugged in. To get it to unfreeze, i have to press random buttons and unplug and re plug in earbuds. After 20-25min of doing this it unfreezes and I come to find it has gotten little to no charge after being plugged in for hours at a time. Any one else have this problem, and if so what do you do?

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • Ipod nano hold key

    ipod nano hold key is not working. It keeps nano on hold. I tried to recover it through itunes, but it is still not working. What else could I do that will save me a trip to the service center? Thanks a lot

    did you solve this? I have the same problem. no matter how many times I toggle hold switch, hold stays on. can not reset as the menu/select buttons do not work (presumably because of "hold" being on).

  • IPod Nano 3rd Gen stuck in diag mode

    I have an iPod Nano 3rd Gen stuck in diag mode. I have reset it multiple time using the select button and the menu button with it pluged in to the wall, into the computer and not plugged in at all. I reset it using the reset option under power and nothing. Please, can someone help?
    Thanks

    OK.  My first time seeing this thread so hopefully you'll share your success results with me.
    Here is the issue:
    1) iPod Nano 5th gen stuck in Diags Ver: N33GreatDane2A45bp
    2) When I rest by choosing Reset from the Diags Power sub-Menu it boots and brings up the white Apple logo and back to Diags menu
    3) If I reset by holding down Menu button and Center button, same thing happens: Apple logo followed by Diags menu (It flashes iPod Display Console)
    4) So I am always stuck in this loop.
    5) Can't restore from iTunes since the iPod is never recognized in iTunes.
    Thoughts anyone?

  • I have a MacBook using Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows on my desktop, but the device does not show up on iTunes.

    I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1.  When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes.  The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • I am about to upgrade my ipod. i want to give my old ipod nano to a friend. what do i need to do so they can use it on their computer?

    i am about to upgrade my ipod and want to give my old ipod nano to a friend. what do i need to do so thay can use it on their computer and create their own itunes account?

    Connect it to iTunes, select the Nano in the "devices" column and click "Restore". The warning window you get will ask you if this is what you really want to do.
    Your very lucky friend will essentially have it in the same condition as if she bought it new.
    One more thing: if you registered it in My Support Profile, make sure to un-register it. Only you can do that. Have your friend register it under her own Apple ID.
    Message was edited by: John Galt

  • Ipod Nano dosen't show what is song plaing now .

    Ipod Nano dosen't show what is song plaing now and volume.I see only empty display.I have reinstalled my iPod,iTunes software and reseted settings in my Ipod.But i have the same problem.Please halpe me.
    Fujitsu Siemens   Windows XP  

    Sorry to bother everyone I should have searched for it first! I found what was wrong. Thank you

  • Ipod nano recall 1st generation what do i do

    ipod nano recall first generation what is the course of action

    See the web page for further information.
    Stop using the iPod nano immediately.
    Best of luck.

  • Ipod nano 7th generation stuck in recovery mode

    My iPod nano 7th generation is stuck in the recovery mode. It's a perpetual loop. How do I restore my device to normal so that I can sync my music?

    Hi akki2094, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like you have an iPod nano that is stuck in recovery mode. 
    If you haven't already, use the steps in this article to restore the iPod to factory settings:
    Restoring iPod to factory settings - Apple Support
    If your iPod can't be restored, it may require service as mentioned in iPod nano (7th generation): Hardware troubleshooting:
    If the issue is still not resolved, please read this information on servicing your iPod.
    Best Regards,
    Jeremy 

  • My iPod Nano 8GB was stuck on "Hold" no matter what I did...

    Has your iPod ever been accidentally filled to over-capacity?  Mine was. It appeared to introduce some file corruption issues.  My iPod was stuck on hold. Period.
    A hard Reset would not work:
    No result after toggling Hold button and pressing Menu+Select
    No result after plugging in a power supply or plugging the iPod in a USB port
    Soft Restore did not work
    Suffered intermittent sync errors after Restore
    Toggling the sync and playlist settings produced some over capacity warnings (Hint this was the culprit)
    Even when a synch with a proper amount of content (no error on the Capacity bar) completed, the iPod stayed stuck on hold
    Here's what worked for me; I carefully re-wrote *all* content using small amounts of content in *every* data type appearing on the device.
    Verify that you have iTunes playlists and PC directories with media to cover each type of data you have ever had on the iPod, e.g., songs, videos, TV shows, photos, Podcasts.
    Verify that playlists and directories contain manageable amounts of content (stuff that's quick to sync after a Restore is run).
    Verify that you check "Sync" for every data type on the Synch toolbar.
    Select "Synch only checked songs and video" on the Summary tab, you might also select "Convert higher bit rate songs to 128kbps AAC"
    Run the "Restore" routine and allow the unit to sync with verified settings as established above.
    Voila: After the Restore, a Synch and a manual Reset, the lock went away.
    I reset the Sync switches for my original content (I verfied it would fit before cutting it loose).

    Rainbow -
    I've read the thread you linked to above and the only thing I find missing in the saga is any mention of the PRAM battery. If it is depleted (and it would be getting close to depletion if it has never been replaced) it could be causing your problem.
    Do you see any strangeness in the time or date displays? That would be a sure sign that the battery is dying. I haven't run into the problem of a bad battery causing constant freezing but it wouldn't hurt to check it out.
    As far as temperature effects, the usual pattern of overheating would be a shutdown of the whole computer, a designed-in precaution.
    Forgive the battery tutorial if you've already dealt with that possibility.
    Schadow
    FP iMac 800, 9.2.2/10.1.5; eMac 800, 9.2.2/10.4.6; iMac 266, 8.6   Mac OS X (10.4.6)  

  • IPod Nano 4th Gen Stuck on Hold

    I recently dropped my iPod in a cup, that barely had any water. However, there was enough to soak the top bezel, and the hold switch. The iPod was functioning normally for 2 days, before I realized the hold switch did not work. I kept on unlocking and locking it, until my iPod was finally on hold. Unfortunately, that's when I realized that I had permanently stuck my iPod on hold. I know that this is a hardware issue, so please do not tell me to reset/restore my iPod. I also do not have an Apple Retail Store, nearby, so the warranty is out of the picture. Can anyone help me?
    Thanks in advance

    sorry i mean the lock icon is still there if i turn off hold

  • What does the Ipod Nano hold exactly?

    I was just wondering if it held everything like the ipod original does? Will it hold files like the ipod use to or is it just for music and movies?

    The iPod nano is just a smaller, less capacious version of the iPod classic. There are no differences in capabilities.

  • Ipod nano 7th gen stuck on apple logo screen

    New iPod nano 7th gen.  At first attempt to upload songs, was prompted to update software.  So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said.  I didn't pay a whole lot of attention as i was not expecting any problems).  I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost.  At this point, the device has been stuck on the apple logo screen for a couple of hours now.  The only response I can get from it is when I do a reset.  The screen will black as it should and then go right back to the logo and stay.  Please help.....Son not happy as this was one of his Christmas presents this morning.  Really not looking forward to a trip to the apple store on the day after Christmas.

    I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

  • Ipod nano shows icon of folder with exclamation mark on start nd then shuts

    i just got a new ipod nano i tried to start it after charging it but it shows me an icon of a folder with an exclamation mark and then shuts off.can nybody pls tell me how to d the entire setup from the start to end please

    All i can suggest is that you try and restore it on another computer (maybe a PC) and see if it fixes the problem. I am a service technician and I've done pretty much all the things you've tried on a iPod Video and still had to replace it so it looks like that'll be what you need to do.

  • IPod nano 4th gen stuck in dfu mode.

    I have a problem with my son's iPod Nano 4th Gen.
    When I try to restore the iPod in iTunes it gives the error 1601 and says it doesn't recognise the iPod.
    When connected to my laptop without iTunes it says 'usb DFU device'.
    I have tried every combination of buttons, before anyone tells me to 'just hold in menu and select'.
    I can't get the iPod out of DFU mode to restore. Any help is much appreciated.

    Bump

Maybe you are looking for

  • UPGARDING PROBLEMS!!! NO CD Drive on a Power Book Fire Wire

    First Of All Hello Everyone: Here's my problem, a friend of mine ask me for help with he's power book Fire-wire the machine has (768 MB on RAM and 15 GB on HD),To upgrade his OS 9.2 to OS X, but (Here's the real problem) it has no cd or dvd drive, (A

  • Spry Sliding Panel bugs with Flash SWF, iFrames, CSS background images

    Greetings, I'm working on a site right now that is build with Spry 1.6 Sliding Panels. On the home panel I have integrated a looping SWF, and scrolling iFrames on the Overview panel. After extensive research on these forums, I'm still scratching my h

  • Tree component bug (?) and some questions

    Hi! I have some problems and questions about tree component. Problems: 1. I have an expanded tree with ~300 items. Each item label displayed in 2-3 strings. After QUICK tree scrolling using mouse wheel (I make 3-5 scrolls) for most of items displayed

  • Kernal Panic Need Analysing

    Hi, I have the 13-inch Mid 2007 MacBook (running 10.6.7) and recently I'm getting a ton of Kernal Panics. Rember seems to think my RAM is fine. Any help would be appreciated. Thanks in advance, Mr. KernelPanic 1st Fri Apr 29 16:43:55 2011 panic(cpu 1

  • Interface pgm doubt

    Hi, I have a requirement to enhance orders05 with two zfields.I want to generate an outbound IDOC..Pls let me know how to fill this zfields.Automatically the value will be populated or need to find an exit .If so pls suggest exit name.This two fields