Ipod nano in body

Where do you use the ipod nano in the body ? With armband or t-shirt ?

yeah i would most definately use the armband cuz if it's just clipped to your shirt or pants it'll bounce around a lot and since the clips sometimes aren't that great,it might fall off or get damaged

Similar Messages

  • Ipod nano turning on randomly

    Hi
    My ipod nano 6th gen keeps turning the screen on when paused. This means the battery runs out really quickly.
    I've tried resetting and restoring it but this hasn't helped and there are no alarms or calendar events on it.
    Any suggestions?
    Thanks

    Hey,
    Where does that frontal strap go? Does it wrap accros the front or does it go to the back? It may be jsut barely touching the ipod try putting it on hold and see if it does the same thing and:
    I have purchased the INVISIBLE shield and I love it.
    This is the iPod Nano - Full Body Shield:
    http://www.shieldzone.com/item_description/APL6090.html
    This is the iPod Nano - Full Body Shield with Click Wheel Cut-Out:
    http://www.shieldzone.com/form/index.html?preadd=action&key=APL6095
    Also, if you have some scratches on your iPod and want to remove them use this stuff:
    http://www.shieldzone.com/item_description/APSPOLISH.html
    I used it and it was just amazing! All my scratches were gone. I know that this stuff is a little bit on the expensive side but believe me when I tell you that it is the best $20 you can spend to protect your iPod. They also now need less soap and water than before, which was like 4 drops, so you don’t even have to think about ruining it. They also have a lifetime warranty so if some how you do manage to scratch it, it will be replaced at no cost.
    But it it rocks! Way better than that clunby deal

  • IPod nano 6th gen shuts down instead of Sleep

    I've recently acquired an iPod nano 6th generation and it has an issue that's killing me inside: instead of turning off the screen, like the Sleep function, every one minute or so the iPod shuts down. It's not exactly the same as turning off completely, but everything I'm doing at the time stops, including music. The big deal is that this happens automatically, so it's nearly impossible to listen to anything. I've tried to press the Sleep/Wake button while listening to music, but it happens the same issue, even if the User Guide says it should be quite the opposite...
    I don't think it's a battery thing because the battery is full and the iPod works normally as long as I keep touching the screen everytime. I gained it yesterday, so it's brand new. The only different thing I did was to use my own headphone (a Pioneer SE-MJ31) instead of Apple's, because I can't use earbuds. But if the music DOES play (and it does it well) then it's compatible, right? And it also doesn't seem that a headphone could cause this.
    Does anyone had this same issue and/or knows what to do?
    Thanks in advance

    Make sure the headphones are plugged all the way in, meaning no silver from the headphone's plug can still be seen.  You should hear a sort of clicking noise when inserted the headphones to signal that they have been fully seated.  The white part of the headset should be flush with the body of the Nano.
    B-rock

  • Can't Sync Music From Old iPod Nano to New iPod Nano

    Ref: Windows 7 PC, iTunes 11.3, Nano Gen 7 1.0.3
    I had an iPod Nano Gen 5 with my music loaded. When I switched to the iPod Nano Gen 7, the music in my library will not download from iTunes. Some music is from CD, some from iTunes Store.  On the Gen 5 I had unchecked Sync Music and checked Manual manage music which essentially erased all music from the iPod. Seems to me this would permit the music to be available  for the Gen 7. No luck so far getting any of my music to load, I have subsequently removed and re-installed iTunes with no change. Under the Summary tab for the device I have checked only Sync only checked songs and videos. On the Music tab I have checked Sync Music, Entire music library. 0 songs is indicated next to Sync Music. This has been going on forever. Since I list to podcasts primarily, I have let this problem ride, but now I'd like to resolve it.
    BTW I can still connect my Gen 5 and sync the entire library to it. What gives?

    It has no speaker so it isn't surprising you don't hear music when it has no headphones plugged in.
    Have you tried a different set of headphones? And the jack is very tight on a new Nano, make sure the plastic on the headset jack is flush with the body of the nano.

  • IPod Nano & Outlook Contacts - Error

    I keep getting an error when updating. I have it set to sync with all Outlook contacts but I get "iTunes cannot copy contacts to the iPod 'A.J.'s iPod'." Any body know a fix.....
    iPod Nano   Windows XP  

    Hi A.J.
    Welcome to Apple Discussions
    Just to make sure before going any further, have you looked at Knowledge Base Document #302270? It goes into detail on how to sync contacts with Outlook. I just want to point out:
    "Outlook 2000 is not supported.
    Only the primary email address is synced for contacts in Microsoft Outlook Express.
    You must have Outlook Express or a full version of Microsoft Outlook to sync information (trial versions of Microsoft Outlook may not work)."
    Jon
    I do not use a Windows computer. I just want to make sure you have seen some the reference documents.

  • Can't decide which ipod nano case to buy :S

    I am actually planning to buy an ipod nano 2gb. I want to buy a nice protective leather case with it which will protect my ipod from scratches. But I am actually very confused which one to buy :S Can any one of you help me with the decision? It would be a great help, I am looking for a case stylish as well as that would protect my ipod nano very well...
    I also noticed that in the box of the ipod nano they included a case. Can anyone of you let me know what type of case that is? Or show me a picture of it... please. Thank you very much for your concern. Waiting for reply

    yeah, thats what i mean. This is the one I bought, though is basically the same as the one you found. This one actually has a warranty on it, and I've heard its the best out there. It gives full body protection, too: front, back and sides. Unfortunately, I don't think you can take them off and put them back on, at least they wouldn't look good reused. They are basically a sticker that you apply to it, using a tiny bit of water to keep the air bubbles out.

  • Ipod Nano 7 - No sound comes out of the headphones, and i tried different headphones... Can you help? What shall i do?

    Hello ! No sound comes out of my ipod nano 7. I tried different headphones, all working on other players, but nothing comes out of the ipod nano. Of course I turned the volume up and made sure to press on play... Anybody to help me out? Thanks a lot !

    The jack on the Nano is very tight when it is new. Push the headphones all the way in until the plastic on the headset jack is flush with the body of the Nano.

  • I got my ipod nano this noon, the 7th, the earbugs just don't work, only when i hold them tide to the ipod

    the earbugs just don't fit to the ipod nano 7th

    The headset jack on the Nano is very tight when it is new. Make sure it is fully inserted. There should be no gap between the plastic on the headset jack and the body of the Nano.

  • Problems with ipod nano world clock...

    i bought my ipod nano yesterday... and i cant get the clock working properly... everything is ok... i mean i select the time zone put my local time add a clock from a city in south america (that has 2 hours of difference) i am in miami FL, USA and i select the time zone and all that and put the time and add that city and it works ok the time is right... but when i plug the ipod to the pc the clock completely desconfigurates.... and the time from that city is wrong... is or 3 hours of diference or 1 hours of diference and so on.. it never stays exactly as how i put it... someone can help me??

    dear kiran,
    well i got my nano just a week back and all looks fine.since its paper thin and very delicate you have to take good care of it in handling.the piece looks cute and has a very good sound quality .i have already downloaded songs and around 50 pics.pics show out decent.just one thing to remember dont remove the inner transparent covering on the nano to protect your screen and body.as of now i am pleased with my nano.
    regards
    nath

  • Mac ipod nano 3rd gen - to windows xp

    Hey every body,
    I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

    As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
    If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
    Message was edited by: StarDeb55

  • IPod Nano 7th Generation Mulitple Composers

    Hello I have an iPod Nano 7th Generation using Windows 8 iTunes 12. For an example I have a song Wolfgang Gartner - Illmericaand Wolfgang Gartner & Tom Staar - Evil Lurks. But on my iPod Nano 7th Generation when I tap 'Artists' I find
    Wolfgang Gartner
    Wolfgang Gartner & Tom Staar
    Is there a way to fix this in iTunes 12 Windows 8.1? If so please say so. If NOT please so as well! If you don't fullly please ASK! Thank you!

    Make sure the headset is plugged all the way in. It is a very tight fit, the plastic on the headset jack should be flush with the body of the Nano.

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • My ipod nano is fully charged, I put on shuffle and song starts about 1 minute into song it shuts off can anyone help?

    My ipod nano is fully charged, I put it on shuffle and the song starts, about 1 minute into the song the ipod shuts, I push the power button and it turns on to play screen I push play and song starts again where it was when it shut off. Can anyone help?

    This is usually a good indication that your headphones aren't plugged all the way in.  The white part of the headset should be flush with the body of the Nano and no silver from the headphone's plug should still be seen.  The headphone jacks on the newer nanos are a bit tighter than in previous generations and require a bit of extra force.
    B-rock

  • I received a replacement iPod nano the beginning of January.  I did have radio app but now I don't.  How can I get it back?

    I received a replacement iPod nano 6th generation the beginning of January.  I did have the radio app but now I don't.  How do I get it back?

    Make sure your headphones are plugged all the way in. The white plastic on the headset jack should be flush with the body of the nano.

  • I have a new ipod nano 7th Generation.  When I plug in the earphones, there is no sound, althought ipod shows song is playing.  Any solutions?

    I have a new Ipod Nano 7th Generation.  When I plug the earphones in, there is no sound coming from the earphones, even thought the Ipod shows the song as playing.  Any solutions?

    And the Radio app probably doesn't work either.
    The headphone jack on the nano is very tight when new. Push the jack all the way in, the plastic on the headset jack should be flush with the body of the nano.

Maybe you are looking for

  • Problem with boot camp

    Hi, how are you all I have a problem since 3 months I tried something in boot camp and ended up doing something wrong Now every time I want to start my iMac I need to hold alt and choose MAC, or else it will take me to black screen that shows "no dri

  • Internet Explorer 8 with Adobe Reader 11 in one package - embedded PDF problem

    Hello, I am trying to package Internet Explorer 8 together with Adobe Reader 11 in ThinApp 5 for Windows 7. I am capturing on clean Windows XP with IE6. Of course, I am using "IEShims.dll" for IE8 in order to make it work in ThinApp. From the first l

  • .NEF Files in Bridge 2.1.1.9

    I'm looking for help on this matter: For years  I used Canon digital cameras and the thumbnails in Bridge weren't affected by the auto correction. Now my company gave me Nikon cameras. The problem appears when I preview the thumbnails of the  Nikon .

  • BED is Getting Double in MIGO while creating of RG23D entry

    Hello, While we have procuring some material to DEPOT directly from vendor. As per government rule we are maintaining the ZMRP and ZABT condition types in Pricing procedure In Pricing procedure 10 ZMRP Step from 0 to 0 20 ZABT Step from 10 to 0 30 Su

  • CRM Interactive Reports not working

    hi, In CRM2007 we have this new feature of interactive reports, where we can create OLTP reports. I am trying to explore this feature. But when i click on Create report option, I am getting "Maintain RFC Desination for local BI". When i go to SM59 an