Ipod nano in disk mode (yes i already read the other one)

my ipod is in disk mode just wondering how else to get it out or how many times i should repeat the hold menu then hold the middle button?

got it

Similar Messages

HT4235 Itunes only sees ipod nano in disk mode and still won't sync it

I have to place my ipod nano in disk mode for itunes (or Windows for that matter) to find it. In disk mode Windows and Itunes see the ipod and it passes all the diagnostic tests save for the sync test where it can no longer see the ipod and apparently a file is also not found. I'm ready to just reset it, but am unable to make that happen.
This problem began when I downloaded some songs from Amazon and fumbled the job purchasing and downloading some of them twice. Not very smart, but it was late. Anyway, I also downloaded their Cloud player and had it pass the songs to itunes. It was in itunes that I saw the duplicate copies of the songs. Itunes and the cloud player proceeded to butt heads, I deleted the the extra song copies and also uninstalled the Amazon cloud player. Then itunes went into the state I've described above.
I'd appreciate any help.

Hi GChild6,
If your iPod is being recognized as a disk, you may find the following article helpful:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
- Brenden

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

No. You can turn your 6G Nano in to be recycled at your local Apple Store for a 10% discount towards the purchase of a new one. Otherwise, your only other option would be to sell the iPod on Craigslist or eBay and use the proceeds from the sale towards the purchase of the new 7G nano.
B-rock

IPOD nano in DISK MODE, but still not RECOGNIZED

My Ipod Nano has stopped being recognized by my PC (Windows XP OS). After reading the discussion topics here I had a hope that after switching it to DISK MODE, the PC might recognize my Nano. However, it still doesn't. I hope the Wizrds out here rectify the problem I am facing with my IPod.

Try restoring your iPod (in Disk Mode) from somebody else's computer. (This might replace everything on it with their music for the time being, but you already seem willing to wipe your iPod, so it should be OK.) If it works, then try to do the same thing again on yours. But the problem in this case would be not with your iPod but with your computer. Try reinstalling iTunes. If that doesn't work, then the issue is probably a more general one with your Windows installation and it may be difficult to find help here.
If on the other hand your iPod won't restore in disk mode from ANY computer, then the only option I see remaining is to take it in for servicing.

Ipod Nano in disk mode

Is it a bad idea to keep syncing my ipod using disk mode? This is the only way Itunes 9.1 will not crash when connected to my ipod.

Hello Livinghost,
Is it a bad idea to keep syncing my ipod using disk mode? This is the only way Itunes 9.1 will not crash when connected to my ipod.
No. Users you manually manage their iPod's contents must always have this option enabled. And if it keeps your iPod from crashing for the time being or until Apple releases another update, then stick with it.
B-rock

Cant get ipod nano off disk mode (using anapod on windows me)

please help me! my ipod keeps flashing the apple logo but i cannot fix it.

try reseting it, hold the middle and menu buttons down for 6 to 10 sec.
iPods- 4gb Balck Nano, 60gb Black 5g}{Black Moto Razr}{PSP}{iPod Radio Remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/sm.jpg"align="right

ANOTHER blue screen post - yes I've read the others

Please don't post any links to the Apple support docs. I've read them all, tried it, and their solutions do nothing. My system does not have the "ApplicationEnhancer.bundle" file present, and these are BRAND NEW 10.5 installs (not upgrades), which are going to blue screen within minutes or hours after install, so doing an "archive and install" is just pointless as doing a fresh install is the same thing.
So, now I have tried THREE different completely fresh (reformatted disk) installs of Leopard on my Dual 2.5 G5, and every single time I end up with a blue screen after I restart once or twice. This has happened right after a 10.5.0 install from the DVD on the first restart (before even entering account info), and it has happened after getting all the way to 10.5.3 with other system software up-to-date, then next morning, blue screen, no startup. In 2 of the 3 instances, I never installed ANY other software other than what popped up in software update, and in the 3rd instance I got as far as Photoshop and setting up my eMail before back to blue screen fun.
What's the deal? Leopard is just unusable on a Dual G5? I got it installed on a much older eMac and 12" Powerbook G4 with no issues using the same install DVD, and the G5 always appears to be fine, until a restart and then nada. I'm very careful to repair disk permissions before and after any software updates, and as I said, I've barely installed any software on the computer, and actually installed no extra software in a couple of cases, yet the problem continues.
Other interesting facts: I would normally hold down 'option' and choose my backup cloned Tiger firewire volume to boot up off of since I can't boot up off the internal, but holding option also results in an infinite spinning watch icon - the internal Leopard volume is visible, but it never shows my external 10.4 volume and never stops spinning the watch so I can't actually choose an option anyway.
At this point, I'm going to clone my backup Tiger OS back to my internal and give up on 10.5, but would love to know why this is happening, and why when there are seemingly dozens of other threads about the same issue that there is no solution.

--------
Other interesting facts: I would normally hold down 'option' and choose my backup cloned Tiger firewire volume to boot up off of since I can't boot up off the internal, but holding option also results in an infinite spinning watch icon - the internal Leopard volume is visible, but it never shows my external 10.4 volume and never stops spinning the watch so I can't actually choose an option anyway.
That IS interesting, because at that stage you are not running Leopard. OS X has not yet loaded, and you are only running Startup Manager, which is in the Mac's firmware. Since you are experiencing problems even before OS X has booted, I wonder if you have a hardware problem - either a bad or loose internal component or a flaky external cable, hub, or device. Try disconnecting any external devices or hubs. I would also try resetting PRAM and running Apple Hardware Test if you haven't already done so.

I had an old ipod, battery went dead so I just bought a new ipod touch but my old pc doesn't read the new one, when I attach it to my pc it says "camera detected" how to I get the new ipod touch to connect to the pc so that I can download songs?

I had an old ipod which I had downloaded songs from my pc..I bought a new Ipod touch and want to download songs onto my new ipod touch when I attach the ipod to my pc it reads "camera detected" I have a mac air as well but all my songs are on the pc. I want to download songs onto my ipod touch from the pc can any one help me?
Les

This may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do.

HDV 1080i 50 to SD DVD - (yes i have read the other posts!)

HI All,
I have read two other posts and still struggle to get a good clean output that does not suffer from some degree of motion shudder or interlacing type lines. I capture 1080i 50 pal in australia and edit native hdv. On some recent shots I have found an annoying motion shudder when i do a slow pan. I have seen this often on hdv. Most of my work goes to the web via h264 which is great, but with dvd if i choose a format that matches upper field, i get combing or similar. I turned to outputting to dvcpro pal with none as the field dominance and it appears to work better( not sure why).
All my work needs to be output in web and dvd so i have tried a cocktail of uncompressed 8 bit, which still showed a combing type issue, and DV pal which seemed soft even on external monitor.
In the bonsai method i could not get a good result at all and wondered which way the sequence settings were set and render options which were not visible in the tute.
Is there another bulletproof way to get the best pic quality without endless torture? I am considering a mxo box as a possibility but am not sure if this will help in encoding sd better than the usual way.
Any suggestions greatly appreciated.
Cheers
Jon

Is there another bulletproof way to get the best pic quality without endless torture?
Don't use HDV??
I have no idea how to help you beyond capturing as some other hd codec which doesn't help you at all. A couple of days ago, a cam op on a show I worked this week was showing off his brand new little Sony AVCHD camcorder. His biggest complaint was that Windows Movie Maker wouldn't work with this jewel. I had to point out to him that how many years on is it and HDV is still a dismal wreck to work with natively. Live tv cam ops think everything is plug and play as it usually is on their jobs.
Good luck, I can definitely feel your pain. There are some wonks on here that do have good HDV workflows, perhaps they'll drop in later.

Still image issues (I've already read the other similar post- didn't apply)

Still having issues with still images in my timeline. Viewer they're fine, Canvas they're repulsive.
Seq. settings are NTSC, 29.97, 48k. I have tried several different extensions for the stills and have even tried importing them at different sizes. I know I'm not the first person to incorporate stills in my timeline - how do I solve this? (I followed the advice on a similar thread from a few days ago).
Also, I exported a small clip and viewed it on a different computer as a QT file and it was just as bad.
Please help. I'll make you a mix cd or a burrito if you can help me out. Thanks.

#1 Transitions "Insufficient Content"
Shane's Stock Answer #1: Trying to add a Transition and get the error "Insufficient Content"
A full 1 second cross fade reaches 15 frames into each clip. So, if you want to change a cut to a cross fade, there has to be at least 15 additional frames of each clip. Say you're trying to cross fade from one clip into the very first frame of a second clip. FCP cannot 'create' 15 more frames of the second clip to do a cross fade. If they're not there, you're out of luck.
What you are running into is that you are marking an out point at the far edges of a clip then adding a cross dissolve, say 30 frames (one second) in duration. Since the dissolve is centered on the cut, it will start 15 frames before the cut, and try to go 15 frames AFTER the cut...which it can't do. What you need to do is plan how long your dissolve will be and back-time your cut so that it works.
You need to make sure that your clips have enough media (called 'handles') at the beginning of the incoming clip and at the end of the outgoing clip for the transition. For example, if you have a 1 second (30 frame) dissolve, your in and out point need to be at least 15 frames from the edge of the clip.
I have them all here:
http://library.creativecow.net/articles/rossshane/fcpfaq.php
http://library.creativecow.net/articles/rossshane/fcpfaq2.php
http://library.creativecow.net/articles/rossshane/fcpfaq3.php
Most of them...I keep adding.
one of the most popular is number 8:
Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
Then start up your camera and tv, then open fcp.
Go to the View Menu, choose > External video > all frames
VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
VIEW>Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Ipod Nano and Disc Mode??

I went to charge my Ipod last night, and a couple hours later I wnet to check how it was doing and it said Disc Mode and fully Charged. After disconnecting I went to turn it off, and it wont do that but it will update! Can anyone help? I'm not sure what's wrong with it and it's barely 3 wks old
thanks

Welcome to Apple Discussions, CherryPie!
Could you tell me if you have set your iPod Nano to 'Disk Mode' using the latest release of iTunes? If not, then this is your problem.
Regards,
Steve

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

ITunes 7.0 ONLY recognizes nano in disk mode

Hi All,
This little problem of mine has been driving me nuts for the past 2 days.
I recently got an ipod nano as a gift (not the second gen) and wanted to try it out. So I installed the latest iTunes 7.0 (and rebooted...), charged the nano to full battery, then plugged it in. The nano shows "do not disconnect," and Windows shows the drive in My Computer and I can navigate inside the few folders it has. When I open up iTunes though, I don't see the nano no matter how long I wait. Doing a hard reset of the nano (action + menu) doesn't help. However, when I put the nano into disk mode (action + play) and reconnect to the computer, iTunes magically recognizes it, lets me name it, and even lets me sync my music. I can't directly drop the music in the nano for some reason (there's a lock icon next to the disk space indicator).
I updated the nano the latest version through iTunes and even tried doing a complete factory reset. None of this gets iTunes to recongize my nano unless it's in disk mode. I have a 5G video iPod that I had filled on another windows machine, so I connected it using the same cable/computer/itunes combination, and that gets recognized no problem.
Has anyone had the same experience and perhaps found a solution to this?
Thank you
nano 2gb Windows XP Pro

I am having a similar problem. New Nano.. won't allow me to play mp4 so I tried to restore. It won't restore and then doesn't recognize.
I love how I have a 30g Video, Shuffle, and Nano, but I can't play my hundreds of dollars of itunes music on my nano to run. Someone needs to make a commercial making fun of itunes.

HT1378 i am unable to put my ipod classic into disk mode. what do i do to reset/restore it?

i am unable to put my ipod classic into disk mode. what do i do to get the red x tto go away and restore my ipod?

imlockedoutofmyiphone wrote:
I have looked at multiple websites; they all have the same instructions for putting your IPhone into recovery mode using ITunes.
My computer was not downloading ITunes before, but I recently made it work. I turned my phone off, held the home button, plugged in the phone to the computer with ITunes already up. The little USB cord and ITunes logo showed up. The instructions said that a popup would say that ITunes had 'detected and IPhone in recovery mode', and from there I would be able to reset my phone. However, the popup never happens. I have tried this several times, and it's the same: I see the USB cable and ITunes logo on my phone screen, and in the corner of ITunes, a picture comes up of a phone with a little 'X' next to it. I clicked on the phone, on the X, but nothing works. The popup just never shows. I am unable to reset my IPhone because of it. I have not found any other way for me to reset my phone, since I didn't activate Find My Phone or ICloud.
There is no icloud on an iphone 3, because you need IOS 5.0 or higher, the highest IOS is 4.2.1

IPOD stuck on disk mode

How do i get my ipod out of disk mode, it wont do n e thing at all, wont reset or turn off or anything and it says ok to disconnect, but nothings connected what do i do

Zach,
Need a little more info:
- What OS are you using--Mac or Windows?
- Does your nano show up in iTunes when you connect it?
- Is your 'Hold' button showing white next to it (meaning it is off)?
Regards,
David

Ipod nano in disk mode (yes i already read the other one)

Similar Messages

Maybe you are looking for