Ipod nano is frozen despite resetting and restoring

My iPod nano 2 gb is stuck on the languages selection despite resetting and restoring. The wheel won't work . Battery indicates full life and hold switch is off.

See these forums.

Similar Messages

  • White screen on my iPod nano 6! Sync, reset and restore don't work!

    PLS HELP!
    White Screen on my iPod Nano 6! Every time I reset it it's normal, but the white screen comes back every time I turn my iPod off and on. I also restored it a few times and sync.ed it but there is still a white screen!
    pls help! thx

    you should probobly let the ipod fully charge then keep it on till it dies then re charge it

  • My 3gs is frozen on the Apple boot screen with a spinning wheel despite resets and restores as advised everywhere I look? Any other tips?

    I'm sure this is probably covered in here somewhere but I can't find it, after an hour of searching I have already done everything I see suggested!
    I'm stuck on the Apple booting screen on my 3gs with the spinning wheel, I've tried resetting and restored to earlier versions and to blank but everything ends the same.
    Please help me!

    Well if you are mechanically inclined you can try removing the battery and then reinserting it.  There are a couple of good videos on youtube--milliamp has one---.  You will need a .00 phillips screwdriver and a tool to remove the cables.  I just replaced my batter and I can say that the difficulty level is about a 5 out of 10.

  • Apps crashing, despite reset and restore?

    I'm having problems with any apps downloaded to my iPhone. No apps will load, they just simply close immediately... I have tried resetting, turning off the phone, and restoring to factory settings... As well as updating to OS 4.0... I have also redownloaded the apps, and nothing is working?

    If all apps are not in your iTunes library, each app that was on your iPhone must be downloaded one by one.
    If all apps are in your iTunes library, they can be reinstalled on your iPhone via the iTunes sync process - selected under the Apps selection for your iPhone sync preferences with iTunes.

  • I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. Problem: no Genius bar in India. Theories?

    I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. The problem with the simple solution: there's no Genius bar in India.
    Any idea what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

    My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.  I have the latest version of iTunes.  Windows has all the most recent updates too.  I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • My nano has boxes around its icons and I can't slide to the left or right. I've tried resetting and restoring it but nothing seems to work. What do I do?

    My nano has boxes around its icons, even the around the time. When I tap into my Songs or Now Playing, I can't get out because I can't slide either to the left or to the right. It appeared after I transferred some songs from my iPod to iTunes. I've tried resetting and restoring it but nothing seems to work. HELP.

    And the voice over's activated and it tells me to double tap things to select them.

  • My Ipod Classic (160G) no longer synchs completely with iTunes (93G).  Have reset and restored to no avail.  AM about to try roll back to a previous version of iTunes, which has been on auto update.

    My iPod Classic (160G) used to sync flawlessly with iTunes (93G).
    Recently, there seem to be fewer folders syncing.  In particular, it is not syncing more recent adds.  It also occassionally refuses to sync at least one mp3 downloaded from  Amazon.com, giving an unable to sync message with an error code or 50.
    I'm running iTunes version 10.7, and the software (2.04) on myiPod is current.
    I only use the iPod for music.  I have only one playlist.
    Reset and restore did not fix the problem; I'm considering rolling back to a previous version of iTunes.  Are there any other  ideas to consider? 
    Please advise.
    Thanks,
    R

    giving an unable to sync message with an error code or 50
    See this older thread for some possible solutions.
    https://discussions.apple.com/thread/3924425?tstart=0
    iTunes and its sync process with your iPod have been know to choke once the amount of data that needs to be transferred, replaced, or updated, reaches a certain size limit in GBs.
    B-rock

  • Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch is only partially functional, requiring multiple taps to do anything, with apps crashing.  I performed all Apple troubleshooting steps, including reset and restore, but no change in symptoms.  What should I do now?

    My iPod Touch (4G, 8Gb) is only partially functioning, requiring multiple taps on icons to do anything, and apps are crashing often.  There is a thin white border that appears around icons when tapped once, then I must tap twice to activate. (that's 3 taps for what used to take 1)  I successfully completed all the Apple troubleshooting page steps, including reset and restore, but there was no change to its condition.  What can I do now?

    Now that I think aboput it further, You may have an Accessibilty feature turned on.
    - Try triple clicking the Home button to see if that will allow access to the iPod so you can go to Settings>General>Restrictions to turn off all the Accessibilty features.
    - If not then connect the iPod to your computer and turn off the features. See:
    iTunes 10 for Windows: Accessibility features for iPod, iPhone, and iPadApplewill exchange broken iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing

  • My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do  on the screen.help pls????

    my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do  on the screen.help pls????

    Might want to post your question in the correct forum.  This is the iPHONE forum.

  • Ipod locked, tried to reset and restore

    Out of nowhere my Ipod became locked. It turns on when I plug it into my computer, it loads files and recharges, but pushing the keypad does nothing. I have tried to reset and restore, and it is still locked. Thanks for any help.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    Or try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT200006 iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..

    iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..I also update everything using a Mac mini and latest iTunes version and 8.1.3 iOS on iPod touch any help will be really appreciated also try different computer like a macbook pro no luck.

    See if yo missed anything here:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    and
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

    Just in case (even though your symptoms aren't explicitly mentioned in the document), let's check to see if there's a LSP problem in play here:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • HT201210 I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    Hi there hhcd92!
    I have an article here for you that can help guide you through troubleshooting this situation:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • Proposal: option to use 'last purchase price' in Purchase Order by default

    Hi, We have had with at least two customer the following requirement. When they generate a new A/P PO, they want SBO to fill the price column for an item with the last purchase price of that item/provider. We did this using an FMS selectign fields La

  • Mass Generation of Billing output

    Hello Gurus, The output condition record for EDI invoices was not entered at the beginning for a customer, so as a result I have many invoices for which I need to generate the EDI output record. I know I can go into each invoice (VF02) and generate i

  • HTTP Transformation using POST Method

    Hi, I will have to use POST method with header as application/json to get the results in http transformation. I downloaded the RESTFUL client utility from Chrome, to see how JSON would look like by passing parameters and the result is displayed as ex

  • Generate dynamic event of producer loop in multiple consumer loop

    I have one producer loop which used event case to interface with FP controls and 5 consumer loops If I have to use the fifth consumer loop to generate dynamic event which send to event case in produer loop.  I have to wire register event with dynamic

  • Scanner Question

    Hey folks, I'm new to programming, and new to this forum. I'm working on a project for school, and I'm stuck. I'm trying to read from a txt file line by line with the Scanner class, I want the scanner to ignore any blank lines in the file. The lines