Ipod nano language screen stuck

can someone please help me with my ipod nano 1st generation. It's stuck on the language screen, i press the menu button and center button at same time to rest it and restore and it's still stuck. please help me.

try restoring the os on your ipod then re syncing the ipod to itunes

Similar Messages

My 4th gen Ipod nano keeps getting stuck on the apple logo.

My 4th gen Ipod Nano keeps getting stuck on the Apple logo screen, this happens everytime I plug it in to charge. I plug it in, an apple logo comes up, and it stays like that the entire time its plugged in. To get it to unfreeze, i have to press random buttons and unplug and re plug in earbuds. After 20-25min of doing this it unfreezes and I come to find it has gotten little to no charge after being plugged in for hours at a time. Any one else have this problem, and if so what do you do?

This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

How do i get my ipod nano touch screen fixed?

How do i get the ipod nano touch screen fixed?

Hello Kimberly j,
You can either set up a service request with Apple through this or you can bring it into your local Apple Store/AASP and have them set one up for you.
https://selfsolve.apple.com/GetWarranty.do
Another option would be a 3rd party repair company who would be able to fix the iPod at a much lower cost.
B-rock

My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

Have you double check to make sure VoiceOver and other accessibility features have not been turned on? See this article for more information and assistance.
iPod nano (6th generation): How to use VoiceOver
B-rock

Ipod nano 7th generation stuck in recovery mode

My iPod nano 7th generation is stuck in the recovery mode. It's a perpetual loop. How do I restore my device to normal so that I can sync my music?

Hi akki2094,
Thanks for contributing to the Apple Support Communities.
It sounds like you have an iPod nano that is stuck in recovery mode.
If you haven't already, use the steps in this article to restore the iPod to factory settings:
Restoring iPod to factory settings - Apple Support
If your iPod can't be restored, it may require service as mentioned in iPod nano (7th generation): Hardware troubleshooting:
If the issue is still not resolved, please read this information on servicing your iPod.
Best Regards,
Jeremy

IPod Nano 3rd Gen stuck in diag mode

I have an iPod Nano 3rd Gen stuck in diag mode. I have reset it multiple time using the select button and the menu button with it pluged in to the wall, into the computer and not plugged in at all. I reset it using the reset option under power and nothing. Please, can someone help?
Thanks

OK. My first time seeing this thread so hopefully you'll share your success results with me.
Here is the issue:
1) iPod Nano 5th gen stuck in Diags Ver: N33GreatDane2A45bp
2) When I rest by choosing Reset from the Diags Power sub-Menu it boots and brings up the white Apple logo and back to Diags menu
3) If I reset by holding down Menu button and Center button, same thing happens: Apple logo followed by Diags menu (It flashes iPod Display Console)
4) So I am always stuck in this loop.
5) Can't restore from iTunes since the iPod is never recognized in iTunes.
Thoughts anyone?

Can I fix coloured vertical lines on iPod nano 6g screen

How an I fix vertical coloured lines on iPod nano 6G screen?

This is the iPod touch forum. I requested that the moderators move your post to the iPod Nano forum

Ipod nano 7th gen stuck on apple logo screen

New iPod nano 7th gen. At first attempt to upload songs, was prompted to update software. So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said. I didn't pay a whole lot of attention as i was not expecting any problems). I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost. At this point, the device has been stuck on the apple logo screen for a couple of hours now. The only response I can get from it is when I do a reset. The screen will black as it should and then go right back to the logo and stay. Please help.....Son not happy as this was one of his Christmas presents this morning. Really not looking forward to a trip to the apple store on the day after Christmas.

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

My ipod nano (6g) screen is stuck one way!

I got the new ipod nano and i turned the screen left and now its stuck like this and i cant turn it back. I restored it and its ok now, but it doesn't turn any way now! HELP!!

How are you trying to rotate the display? All you should need to do is place to fingers such as your thumb and pointer finger and slide them in either a clockwise or counterclockwise motion.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

My ipod nano 4g is stuck at apple screen. reset, reinstall and restore doesnt work.

my friend gave me his old ipod nano 4th gen because he said it was messed up. immediately after you press the play button the apple logo appears and never changes. it constantly stays on the screen. ive restored the ipod to a previous firmware, i've reset the device, ive switched usb ports, ive even went to the extent of resetting my computer because i like this ipod so much. please, if there is any way that you can help me witha solution, that would be greatly appreciated.

Your friend already warned you it was messed up. You tried your best to fix and nothing worked. If you cannot find a solution in the user manual, visit iFixit and YouTube for DIY repairs or take your iPod Nano to a repair shop.
iPod Manuals

IPod nano 4th gen stuck on White Screen of Death

So recently my iPod of 4 years has gotten the white screen of death.
I tried doing the restarting. You know. hold the on/off button then hold MENU and SELECT. Nothing. It just blinks the white screen off and then on.
Interest to note: I use my ipod nano in the shower (with dock). Maybe the steam from the shower had something to do with it?
Anyway, thank you.

I should note that I CAN still use this ipod. I can play songs on it EVEN while my screen is white. Also, when I plug it into my Win7 (32-bit), the iTunes (latest version 1.0.4) recgonizes my ipod and play the songs/playlist from it.

TS1382 ipod nano 4th generation stuck on apple logo-any new suggestions??

Ipod nano 4th generation is stuck on apple logo. It is fully charged and suggestione via apple have not helped. It still connects to my mac air and syncs but screen is frozen to the apple logo. Any suggestions?

Have you done a Reset (restarts iPod)?
http://support.apple.com/kb/ht1320

IPod Nano 4th Gen - Stuck on Apple logo

After not using my iPod Nano (4th Gen. 4GB) for about 4 months, I try to turn it on to find it isn't responding. I figured it was completely dead, so I plug it into my computer to see an Apple logo appear on the screen, and I leave it to charge for about an hour. After charging, my computer still didn't register any usb device. When I disconnected it was stuck on the apple logo. After waiting for a while it was still on Apple logo.
So, I did some reading and put it into disk mode. Once in disk mode it was recognized by my computer, and I promptly restored it. After it was restored I reset the iPod. But, again it was still stuck at the Apple logo screen.
I have repeated this process three times, and each time I reset it after restoring in disk mode, the iPod is stuck at the Apple logo screen.
Any ideas as to why it is doing this?

his is not operating system-specific, but I want to get it on the record somewhere since I could not find the solution anywhere else.
Last week, my third-generation 30GB iPod refused to go beyond the Apple logo on startup. It would power up, flash as if trying to go to the menu, but instead it would just show the Apple again. I tried all the usual recovery methods: resetting (hundreds of times and a couple of different ways), disk scans from the diagnostic menu, restoring with the latest iPod software and with an older version, fsck, using Disk Utility to repair and erase, Disk Warrior, letting the battery drain, everything.
Nothing worked ... until I used Disk Utility to reformat the disk with the "Zero Out Data" option (in the Security pop-up) enabled. This, apparently, reformatted the drive in such a way as to account for bad sectors. It took about an hour.
After that, I restored it with the latest iPod software, and to my delight, it booted normally. It now works fine.
Found that on web mite help you.... but i dont have a mac

Ipod nano black screen and isn't recognized on itunes

Ipod nano 7th gen was working fine then the music started lagging and after about 30 seconds it just stopped working. I now have a black screen and it wont turn on. It is not being recognizedin itunes. What do I need to do to fix this issue. Any and all help would be very helpful. Thanks

Have you tried doing a Reset (restart) in the iPod?
http://support.apple.com/kb/ht1320
In case the battery is low on power, you can try this while the iPod is connected to power.

IPod Nano white screen of death - RESURRECTED! :D

Alright, here's the deal...A friend of mine has a new iPod Nano and gave it to me because it had stopped working, and was hoping it was worth something to recover. Sorry about the long story!
It _wouldn't_ turn on. But, when connecting it to the computer via the USB dock cable, it comes on for a few seconds on a grey-whitish screen. Then turns back off, reboots, and tries again. Step 1 step 2. Nothing.
Although, 'Diagnostics mode' or whatnot it is, does work however. It would still be a faint grey screen, but whiter and more vibrant, as if it's saying "Hey, I'm alive! I'm alive!!!" and I can go through settings and make it (sometimes) change colors, and reboot the iPod.
I was thinking since iTunes never recognized it (It was plugged in the whole time) that I would drown in just for the sake of it.
Well, 3 hours later after attempting to kill the poor thing, it... resurrected itself.
I'm serious, it really seems to have unbelievably done it. When turning it on, I get 2 beeps, but no restart loop, the LCD stays on the white screen though, BUT, here's the good thing.
NOW, I hear the system 'click' sounds when using the buttons and such that it's going through the menu, good news so far! It seems like it because after the 'boot' sequence (it appears to boot very fast, strangely).
The good thing is (kinda) https://discussions.apple.com/thread/1517571?start=0&tstart=0 ... So I suspect that somehow, this method of submerging it under water, letting it dry, blowdrying it, and then leaving it in the heat, somehow restored the SD chip inside of it... possibly only for now... I'm going to use this moment to hopefully get all data off the device, and see for one last time if it's fully restorable...
I have the power! Ok, so I hooked it up to the wall charger (just put the wall connector on the USB cord) and it now beeps two times, and after about 30 seconds or so, I get to the main menu, screen still white, but I can certainly hear the click letting me know I'm 'navigating' the iPod. It doesn't appear to have any music on it, or maybe it does, but I need to connect some earphones first. Or, it supposed to be display the 'sad iPod' icon, but I just don't see it, therefor, I'm blind as to the status of it.
I likely guess it's the battery, since every time I disconnect it, it goes dead. Yep, just looked back, still on. Yep, still menu clicking. Yep, I can start it with no problems now. Any clue what I can try to do to resolve this? Obviously it's turning on, and it seems to be doing something, it boots, (apparently) so that's a good sign.
Please, is there any hope at all in this iPod? At all?
AND, IT JUST BEEPED 2 TIMES AGAIN! And I was just typing... why did it do this? (Funny thing is, how it still works!) Is that really the menu button clicking? That would explain it, I mean it only plays the menu clicking sound AFTER about 30 seconds of it 'booting' to the iPod firmware, so it obviously has some sort of life to it. If I hook up my earphones... Holy Mac! I hear music! It's alive!!! It's alive!!! Oh my man!!! Yes!
It has hope, in a way!
Atleast, I hope, but it works! Freaking amazing! Jamming to some awesome beats right now, some cool hip hop, sound quality you ask? Great, actually! I don't know how, don't want to know, but it seems trying to kill this iPod actually resulted in it being resurrected? How? Who knows! This is awesome! iPod truly CAN have 2 lives, I guess!
Cool stuff, I swear on that! My favorite song was on here too!
How to adjust the volume on the iPod Nano? I don't care, it's playing at full volume, and it's awesome!
The sad thing is, it still has the white screen of death, and the battery is apparently fried still (or needs a good 24-hour charging).
This iPod has been sitting dead as a dud in the storage room for a good 1 year or so, unused. And now it came back to life in a flash. Unbelievable.
I love you Apple.

Your problem was moisture. It was wet inside and sitting around for a year let it all dry up.
If you get this kind of thing happening, speed the process up by putting the iPod into a zip lock baggie with a dessicant (you know those little silica pouches) or even some rice to absorb the moisture. Let it sit for a few days and it should dry it all out.
i

Ipod nano language screen stuck

Similar Messages

Maybe you are looking for