IPod nano, Nike+ discrepancy between verbal miles and display miles.

I've only used my Nike+ 3 times with my 3G nano. I've attempted to calibrate it, but still the displayed miles are significantly more than what the woman tells me when I push the center button and at the end of the workout. Why should they be different?
Any clues on how to fix?
Currently running 1.0.2 software on the nano. iTunes wants me to update to 1.1, but disconnects my wireless connection every time I try to update. That's probably an issue for another forum.
Thx!

There was a bug in an earlier version of the Nano software that caused the distance to be displayed in kilometers even though miles had been selected. The voice continued to give the distance correctly. You can test this out by dividing the distance displayed by 1.6. If it then agrees with what you're hearing, that's the problem.
Have you tried upgrading with a wired connection?

Similar Messages

Ipod nano & Nike Polar wearlink (+ also shoe band?)

To monitore while running the heartbeat using my ipod nano, is it enough to buy and connect the Nike Polar wearlink to Ipod Nano (5° and 6° gen.)?
I don't understand if it also needs the shoes band. Before to buy Nike Polar wearlink I'd like to be sure.
Tks very much for your help

Yes, you need the Nike+ kit to connect the Polar Wearlink.
Pay attention buying the Polar Wearlink, there are many different types. Be sure to chose the ones for Nike+.
bye

PLEASE HELP....=/ IPOD NANO IS STUCK BETWEEN 2 SCREENS

CAN SOMEONE PLEASE HELP ME.....
MY IPOD NANO IS FROZEN BETWEEN 2 SCREENS. IT WONT TURN OFF NOR ON AND WHEN I PLUG IN USB TO MY COMPUTER IT WONT DO ANYTHING EITHER. I HAVE TRIED EVERYTHING...WHAT SHOULD I DO NOW, LET THE BATTERY RUN DOWN? THIS IS THE FIRST TIME I HAVE HAD THIS PROBLEM...I DONO WHAT I SHOULD DO...
THANK YOU VERY MUCH

Try a hard reset of the device with it connected or not connected.
How to reset iPod
B-rock

How do I sync my iPod nano 7 with my HP Laptop and 4s iPhone?

How do I sync my iPod nano 7 with my HP laptop and my iPhone 4S?

You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

What have you tried so far in terms of troubleshooting? After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
B-rock

Ipod Nano icon not showing in itunes and I've tried everything suggested

My ipod nano is not showing in itunes and I've tried everything that has been suggested by Apple. I updated iTunes, I've reset the ipod. I just want to download my songs! Help! Please and Thank you.

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

Discrepancy between the confirmation and deletion of qRFC-LUWs

Hi experts,
When I started PC to loading data from CRM system,data loading stopped.I check the
Log.
"discrepancy between the confirmation and deletion of qRFC-LUWs" (Message no. RSQU016)
How to solve it? Thank you.

Hi Gavin,
<b>Please use Transaction code, SMQ1.</b>
Drill in to the queue and delete the respective queue.
Or use transaction <b>LBWQ</b>
to get to the same information. Select your queue and delete it.
Regards,
Aby

Discrepancy between IM stock and WM Stock

Hi experts,
We found there is discrepancy between IM stock and WM Stock.Before configuring WM storage types , IM Stocks are not syched. So WM stocks are showing less then IM stocks,. Now i need to synch up the IM stock and WM stock. what we needs to do. Can you please guide us.
Thanks & Regards,
Vamsi

OR
have a look at using transaction LX23 (provided you dont use HUM this should help you determine/ analyse and post any differences between IM and WM).
thanks,
A
LX23: Stock Comparison Inventory Management / Warehouse Management
Description
Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
In addition to specifying the area, you can also determine the extent of information to be issued. Here you have three options:
1. "With bin inventory"
In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
2. "All data on material"
Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
3. "Clear differences"
If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system. Negative WM stock figures and stock differences in returns will not be cleared.
If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
Prerequisites
The comparison is also possible for warehosue numbers managed on a decentralized basis.
Output
You receive a list with various materials. The list contains the following information, for example:
The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.
Edited by: WILSAQ on Aug 11, 2009 12:09 AM

Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11

My ipod nano paired twice with my headset and now nothing. The headset states bluetooth profile is A2DP, AVRCP, HSP and HFP whatever this means.

My iPod nano paired twice with my headset and now nothing. The headset has a bluetooth profile: A2DP, AVRCP, HSP and HFP. I have no idea what this means. My iPod shows the headset ID number but now shows "connection failed"

Hello zedor6,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
Best of luck,
Mario

When I try to sync my iPod nano, it opens up driver E and then nothing happens

When I try to sync my iPod nano, it opens up driver E and then nothing happens.

I have searched all over for troubleshooting help.
Doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
iTunes: Error 13019 during sync

My ipod nano 3 generation keep turn in and off even the hold botton is in on possicion can anyone help me with this ?

my ipod nano 3 generation keep turn in and off even when the hold botton is in on possicion can anyone help me with this please?

iPod Manuals

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

My Ipod nano will not appear in iTunes and I've gone threw several exercises.

my ipod nano will not appear in iTunes and so I can not sync no matter what I've tried..help!

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

IPod nano, Nike+ discrepancy between verbal miles and display miles.

Similar Messages

Maybe you are looking for