IPod Nano not recognized by computer.

My iPod Nano 2nd generation isn't recognized whatsoever by my computer. A short recap: On a Windows XP driven computer (not mine and on the other side of the Atlantic) I connected and downloaded music. When I returned home, I wanted to connect my iPod to my own Vista driven computer. No can do! My wife has had an iPod Nano 2nd Generation which was previously correctly connected to my computer. To solve my problem(s) I have logged on to my computer with a different user name and installed iTunes with a clean/empty sheet. Still, I haven't been able to connect my iPod. Is there a solution to this? Cheers, Cai

My iPod Nano 2nd generation isn't recognized whatsoever by my computer. A short recap: On a Windows XP driven computer (not mine and on the other side of the Atlantic) I connected and downloaded music. When I returned home, I wanted to connect my iPod to my own Vista driven computer. No can do! My wife has had an iPod Nano 2nd Generation which was previously correctly connected to my computer. To solve my problem(s) I have logged on to my computer with a different user name and installed iTunes with a clean/empty sheet. Still, I haven't been able to connect my iPod. Is there a solution to this? Cheers, Cai

Similar Messages

  • Ipod Nano not recognized by computer (or itunes) but charging.. so connected

    worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
    connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
    can't find it looking in Explorer
    but, it is charging so... it is connected
    have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
    would that make any difference?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • New IPOD nano not recognized by computer

    I have a brand new IPOD 3rd Generation. I have windows XP. When it is plugged into the port neither computer recognizes it. I stopped and restarted the service but that did not work either. Any suggestions?
    Thanks
    Jgalli

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • Ipod nano not recognized by computer, driver issues

    Hello All!
    I have an ipod nano, first gen, that works just great. Bought another one off of ebay for my husband for Christmas. It looks identical to the one that works - model numbers & year the same - HOWEVER, it is not recognized by iTunes.
    I followed an older thread on this forum and followed the directions to download usbstor.sys & usbstor.inf and move to my i368 folder but I still got the same message - something like "Windows highly recommends not installing these drivers because they have not passed logo testing. This could result in serious damage to your computer."
    Does anyone know what is the issue? Can it be solved another way? Why does my other nano work? Does anyone know if it is safe to the install usbstor drivers? Help please

    Is this any help?
    USB drivers are not installed properly or are out of date.
    There's also this: iTunes 7 or later doesn't recognize the iPod.

  • IPod nano not recognized on computer

    Installed itunes on new computer. Ipad and itouch recognized on computer, but ipod nanos are not. Restarted Apple mobile devices. Didn't work. What next?

    Work through each and every suggestion in this Apple support document as necessary.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod nano not recognized by new computer with same version of iTunes

    iPod nano not recognized by iTunes on new computer. Same iTune versions.  Going from Windows 7 to Windows 8.1.

    Have a look at these 2 articles.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.

  • Ipod nano not recognized by pc and will not turn on

    ipod nano not recognized by pc and will not turn on

    iPod not recognized in 'My Computer' and in iTunes for Windows 

  • TS1538 IPOD NANO NOT RECOGNIZED BY ITUNES ON MY PC

    ipod nano not recognized by itunes.  can't sync since sync is greyed out.

    See:
    ]http://support.apple.com/kb/TS3716
    BTW you posted in the iPod touch forum.

  • Tried everything i can find, ipod nano not recognized by win explorer or itunes.

    ipod nano not showing in windows explorer or itunes. tried every fix i can find, still won't connect. It will connect to another computer, but don't want try a factory restore, it may not work and i lose all my music.

    Hey pepperfromnl,
    Welcome to Apple Support Communities! I'd take a look at this article:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    It'll guide you through troubleshooting steps to resolve the issue and get your computer to recognize the iPod nano again.
    Best,
    David

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • After upgrading to 8.1 in windows, my ipod is not recognized in computer or itunes

    I upgraded to Windows 8.1 a while back, and just tried to synch my ipod with itunes and now my ipod is not being recognized in my comuper or itunes. Does anyone know why this is and/or how to fix it?
    Thanks!!
    Amber

    Hello Amber,
    I would be concerned too if my iPod was not recognized by iTunes.  I found a couple of articles that might help with this.
    If you don't see your iPod in the My Computer or Computer section of Windows, follow the steps in this article:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    If Windows recognizes your iPod but iTunes does not, follow the steps in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • Ipod Nano not recognized on my computer

    My iPod Nano doesn't show up on My Computer or in the ITunes store under devices.
    A popup recommends reconnecting the device but it does not help.  It then says to uninstall and reinstall Itunes.
    This device used to be recognized on a different pc but we changed out pcs.  Is a Nano only supposed to be recognized on only one Pc?

    Try one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes - Windows XP | Windows Vista or 7 | Mac OS X
    > Reset iPod (will not delete everything)
    > Go to My Computer (Windows XP) or Computer (Windows Vista or 7) and see if iDevice shows
    > Restore iPod (will delete everything)
    > Make sure iTunes and/or iOS firmware is up to date
    Extra Links:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Appears in Windows but not in iTunes
    iPod not recognized in iTunes and Mac desktop
    Hope this helps.

  • My iPod nano not recognized in my computer!!!

    I got an iPod nano from the other day. When I hook the USB cable up to my computer, I get this message:
    "USB Device not recognized: One of the USB devices attached to the computer has malfunctioned & Windows does not recognize it".
    I'd like some help in solving this situation. I already downloaded iTunes off the internet, and it has no iPod feature or icons
    Dell   Windows XP  

    See Jeff's reply and links here for some ideas...
    Thread: computer not seeing iPod
    http://discussions.apple.com/thread.jspa?threadID=876145&tstart=0
    Patrick

  • Why is the ipod nano not recognized on my computer in order to sync songs from m music library?

    I need help. I was able to put songs on the ipod nano from songs that i bought from itunes... but how can i put songs on the nano from my music library already on my computer. I have tried dragging the songs to the folder.  I have tried copying songs to the itunes cloud but the nano does not show the songs. How do i put songs on the nano that are from my cds? When I try to sync the songs, the nano is not recognized.

    When I try to sync the songs, the nano is not recognized.
    Is it saying "An iPod has been detected but could not be identified properly"? Or is something a bit different going on?

Maybe you are looking for

  • MAIN_SHDRUN/ACT_UPG error

    Hello Expert,       we are upgrade our develop server from ERP 6.0 to ERP 6.0 EHP 7. we are use SUM tool SUM10SP09 in step 5.5 preprocessing - MAIN_SHDRUN/ACT_UPG. we are receiving the following error:- Checks after phase MAIN_SHDRUN/ACT_UPG were neg

  • Itunes crashes when syncing Ipad with mp4 movies in photo folder for keynotes

    I'm trying to upload a small MP4 video onto my Ipad to use in Keynotes. I place the video in the photo folder and select sync, then tunes crashes. I had created the video in Corel Video Studio pro 3 and created MP4 file. Copied to the IPAD and had it

  • TVARV - Integration model.

    hi we currently use TVARV entries for specifying the materials in the integration models ( to CIF to APO).  when we use a TVARV entry, we have a limitation of using only 500 entries at a times. so the number of materials in Integration Model  is rest

  • HT204370 how do I know if my rented movie is downloading?

    I rented a movie.  Itunes said it would start downloading immediately.  Where is it?  How do I know if it's working?

  • Problem import iMovie 10.0.1

    I can not understand how the import from the camera to a new aymuvi. The note says that the import occurs in fonovomm mode. But oddly enough he does not. Aymuv himself knows this and offers forced to import video from a camera from the menu File? But