Ipod Nano Not Restoring??

Hi,
My ipod nano wont restore. Whenever I click restore to factory settings it says:
"There was a problem downloading the iPOD software for the iPod "iPod". The requested resource was not found.
I tried to reformat it and it says that Windows was unable to reformat the ipod.

Hi Jake&jose,
A "requested resource" error message when restoring an iPod usually is referring to the iPod, not the firmware download (although some errors may refer to this).
So, first, try forcing your iPod into disk mode, by following the instructions here:
Putting iPod into disk mode
With the iPod in disk mode, connect it to your computer, and see if you can sucessfully restore it in iTunes.
If that doesn't help, then try these five steps (nnot the last one, of course):
The Five Rs
Also, sometimes this can be an issue with your USB drivers. Make sure that they are up-to-date, and in some cases, you may need to reinstall your USB drivers.
For details, see this article:
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Do you have success with any of those things?
-Kylene

Similar Messages

  • Ipod nano wont restore~error 1433, ipod nano wont restore~error 1433, ipod nano wont restore~error 1433

    my ipod nano wont restore ~ error 1433 what to do

    Hi, got the same problem as kerry221. The proposal given by stevejobsfan0123 did not solve it.
    Additionally iMac does not shut down after closing iTunes. Need to manually shut down the iMac.
    Problem occurred after last software update.
    Open for any further proposal :-)

  • Tried everything i can find, ipod nano not recognized by win explorer or itunes.

    ipod nano not showing in windows explorer or itunes. tried every fix i can find, still won't connect. It will connect to another computer, but don't want try a factory restore, it may not work and i lose all my music.

    Hey pepperfromnl,
    Welcome to Apple Support Communities! I'd take a look at this article:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    It'll guide you through troubleshooting steps to resolve the issue and get your computer to recognize the iPod nano again.
    Best,
    David

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • IPod nano not recognized by new computer with same version of iTunes

    iPod nano not recognized by iTunes on new computer. Same iTune versions.  Going from Windows 7 to Windows 8.1.

    Have a look at these 2 articles.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.

  • TS1538 IPOD NANO NOT RECOGNIZED BY ITUNES ON MY PC

    ipod nano not recognized by itunes.  can't sync since sync is greyed out.

    See:
    ]http://support.apple.com/kb/TS3716
    BTW you posted in the iPod touch forum.

  • Ipod nano not recognized by pc and will not turn on

    ipod nano not recognized by pc and will not turn on

    iPod not recognized in 'My Computer' and in iTunes for Windows 

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Ipod will not restore after update

    I downloaded the new version to make app. to my ipod touch and I was told to restore my ipod to have the update. Now my Ipod will not restore and I have lost everything in Itunes also. What do I need to do?

    I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
    Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

  • HT201210 iPod will not restore & update?

    iPod will not restore and update. I have checked my security settings and my itunes is up-to-date. My iPod will not do anything and cannot restore??

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1611

  • Ipod nano not recognized by itunes and won't charge

    Ipod nano is about 3 months old, worked fine before with itunes, but now ipod doesn't start itunes, doesn't show up in finder, and doesn't charge.
    I have switched usb ports, reset the ipod, downloaded itunes 6. I downloaded ipod update, but computer doesn't recognize ipod so it isn't updated. I tried "restore", but again not recognized. I tried Isync but it can't find ipod.
    Do I need a new cable that attaches ipod to computer?
    powrmac   Mac OS X (10.4.6)  

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • Ipod Nano not showing in Itunes or Windows

    hi,
    when i connect my ipod to my computer it charges but does not show under itunes or in windows. i've tried all the Rs except one...restore. and the only reason i haven't tried restore is because i can't access my ipod under itunes to run the restore! someone pls help if u can...i'm just about ready to smash the thing!i've spent hours these past two weeks trying to get it to open under itunes with no luck. sometimes it pops up as a "new device that is not working properly", but then it just disappears again and i can't find it under my devices!! somebody, anybody, pls help!
    2nd Gen ipod nano   Windows XP  
      Windows XP  
      Windows XP  

    I have a simelar problem. My wife had an ipod mini which was synced to itunes, I brought her a 4GB ipod nano yesterday and I told her just plug it into the computer and then it will have auto instructions.
    Actually what happens is nothing, I plug it in and it charges, nothing else. I have uninstalled itunes and downloaded it again but it still has my mums ipod mini songs on there.
    basically the ipod does not seem to sync with itunes...any help will be appriciated.
    Matthew

  • Ipod Nano not recognized on my computer

    My iPod Nano doesn't show up on My Computer or in the ITunes store under devices.
    A popup recommends reconnecting the device but it does not help.  It then says to uninstall and reinstall Itunes.
    This device used to be recognized on a different pc but we changed out pcs.  Is a Nano only supposed to be recognized on only one Pc?

    Try one or more of the following
    > Restart your computer
    > Uninstall & Reinstall iTunes - Windows XP | Windows Vista or 7 | Mac OS X
    > Reset iPod (will not delete everything)
    > Go to My Computer (Windows XP) or Computer (Windows Vista or 7) and see if iDevice shows
    > Restore iPod (will delete everything)
    > Make sure iTunes and/or iOS firmware is up to date
    Extra Links:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Appears in Windows but not in iTunes
    iPod not recognized in iTunes and Mac desktop
    Hope this helps.

  • Ipod Nano not recognised as an iPod

    Hi, I have a fourth generation iPod nano, which today just started not working correctly. When inserted into my Mac, it will be recognized as a removable drive (with the name "noname" on the desktop, and it is not recognized at all in iTunes. I have tried resetting the nano, but that doesn't help. I have also tried running in disk mode which also did nothing. When I double click on the Noname icon, it is completely empty. When I look at the iPod menus they are all there but there is no music. I tried to restore it, but since it will not appear as a device in iTunes, I can not do this...
    Any help or advice would be greatly appreciated.

    Hello Jasnz,
    And welcome to Apple Discussions!
    It sounds like you have already tried a coulple of these, but I would make sure you work through the rest of the these troubleshooting steps as necessary to try and resolve this issue.
    http://support.apple.com/kb/TS1410
    B-rock

  • Ipod nano not synching with itunes:  HELP!!

    I just purchased an ipod nano and tried to synch with the latest version of itunes. I'm unable to synch and get an error -53. Does anyone know of this error? I tried calling support and was on the phone for over 3 hours and was unable to receive any help from them.

    The error messeges that I get when trying to update my ipod to 1.1.3 from 1.1.2 is 1417. The error when I try to synch or restore is -53. Does anyone know what they mean? I just purchased an Intek21 high speed USB card. I also get an error on the diagnostic regarding no IEEE 1394 host controller. I'm not using a firewire though, it's a USB connection.

Maybe you are looking for

  • Ipod shows empty.

    Ipod shows empty, but space is still shown used. And everytime I connect my iPod, iTunes stops working. Please help.

  • Number Ranges - AUTO ID

    Hi ,         Please let me know whether it is possible in MDM to create number Ranges same as SAP R/3 .E.g ( In SAP the material number will change based on the Material Type.Usually we can do these type of setting in SPRO... Material Type 1 : 1000-2

  • Where is CRREDIST*.msi????

    I installed a trial version of the Crystal 2008...then decided to buy a license key which has been applied. However, when I run an app someone has given me with an embedded report...it won't run the report saying that I am mising the run time environ

  • Approval process QUERY - Please help guys....

    Hello Experts, I have found some threads in this subject but non of them seem to work for me. My need is : when my employee tries to turn an order into an Invoice witch its card is set to groupname of 'over seas clients' the invoice will not be produ

  • No authorized for enhance include program

    I'd like to enhance include program such as v50rincl. SAP reject me because I have no authorized. However, I can change or create ABAP program. so, should I can do? I also would like enhance structure such as SHP_VL10_SELECT_OPTIONS. should I can do?