IPod Nano Problem with Turning On

Right I've got a bit of a problem with turning on the nano. I know it works because when its on it's fine, but if its off for a while (i.e. 30 mins or more) and I go to press play or whatever, nothing happens. But if I press any of the buttons about 100 times it will come on and work fine.
Has anyone had this problem and know if there's anything I can do about it. It seems like the buttons don't work properly, but it can't be that because they work when its on.
Here's what I know it's not:
Battery (its full)
In need of a restore (tried that)
Reset (tried that)
In need of new software (just put the latest on)
So any help would be greatly appreciated.
Cheers.
Oh also, completely off subject just trying to kill 2 birds with one stone, how do you do backwards deletes on a mac (i.e. what the 'del' button does on a PC)?

AliasailA, you are kidding, right??
You cannot use someone else's serial number or Apple Care Plan--it doesn't work that way.
I noticed you had another post that said the mini was given to you and has a "sad face icon" and out of warranty. Hummmm.
You really have to send that mini in for repair/replacement or consider it a lost cause. Maybe it is time to buy an iPod Nano for yourself.

Similar Messages

  • IPod nano Problem with Nike+iPod

    Yesterday, I just got a new 3G Black iPod nano 8 GB. Sooner today, while looking its features, I found out about Nike+iPod application. Since this is my first iPod, I had no idea what it was. It was asking for the receiver to be connected. I thought that the receiver was actually the USB Charger, so I inserted it. Now it's stuck on the screen asking for the receiver to be attached. I pressed any button I could and tried everything as well. Nothing happened.
    What should I do? I suppose that when it is discharched, it will be able to work again, but since it's not playing music, I suppose that the battery will last for pretty much time...
    HELP!
    Edit: Excuse me, wrong category...
    Message was edited by: Ash/AP

    You will need to reset your Nano by holding down the center and menu buttons until the Apple appears on the screen.
    The Nike+ Sport kit is a device that attaches to the dock connector of your iPod and has a transmitter that goes in your shoe. Without that, the menu function on the Nano doesn't do much.

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • My ipod nano is not turning on,I have tried many different things.help asap

    My ipod nano is not turning on. I've tried many different things to turn it on such as press and hold menu and the select(center) button for 6-10 seconds and wait for ipod logo to appear. that does not work for me. Also the one where I move the button on the upper part of the ipod nano and moving it to the hold position and back and there againa and back. nothing seems to work...PLEASE HELP ME ASAP!! my friend thought that the battary could be so dead that it is not turning on at all. I remember charging it for about 4 hours and having full battary and the next day after charging the ipod nano it went dead!! it just shut off. what should i do...help me
      Windows XP  

    Go step by step.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • IPod nano 3rd gen turnes off and on by itself

    I have a problem: my iPod nano 3rd generation turns off and on by itself every 5-7 seconds.
    How can I solve this problem?

    Is there a case around this iPod? It might be pushing on the touch wheel. Does it happen when you flick the lock switch? If so it seems like a restore is in order
    Try the 5 r's http://www.apple.com/support/ipod/five_rs/nano3gen/

  • My ipod nano 2nd generation turn off by itself

    my ipod nano 2nd generation turn off by itself and when i unplug the USB cable and i plug it again its shows sign do not disconnect then its shows battery low and it turn off again i bought it since 2 and every time i go to the shop to repair it he told me that i don't have the parts to repair it please help any ideas ? thanks

    Try calling the apple customer service maybe they will hel you. 1-800-my-apple(this is the phone number) By the way this problem is very weird. You should call.

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPod Nano only will turn on occasionally. Most of the time the screen is just black.

    My iPod Nano will not turn on. I bought the device last December or January and used it exactly twice and it quit working completely. I sent it in to be fixed. It came back and I used it exactly once and it went totally black. I sent it back a third time and when it came back I used it four or five times and it went black. It has turned on three times since but now it will not turn on. Is this a common problem? Is there a user-fix to make it start working?

    Are you sure the batter isn't just running out of juice?  When the iPod quits responding do you plug it in to charge for a couple of hours?  What are you usually doing when listening to the Nano?
    B-rock

  • One of the episodes that i had on my IPOD NANO 8GB was removed off when i put a new episode of that tv show that i bought and put it on my IPOD NANO 8GB. How do i get the first episode that i bought back on my Ipod Nano 8GB with the new episode on it?

    I had an episode of a tv show series on my IPOD NANO 8GB. I just bought a new episode of the tv show and I went to put it on my IPOD NANO 8GB and it removed the first episode off my IPOD NANO 8GB. Now, all I have is the new episode of the tv show on my ipod and I can't get the other back on there. How do I get the other episode that I had on there first back on to my IPOD NANO 8GB with the new episode on my ipod?  Please Help Soon.

    Hello Lisa,
    Double check your iPod's sync settings from under it's TV Shows tab in iTunes.  Make sure it is not set up to sync only unwatched episodes.
    B-rock

  • Does ipod nano work with ipod photo dock, s-video out?

    Does the ipod nano work with the ipod photo dock, with an s-video out? Will apple make one for the nano specifically?

    The iPod nano cannot show photos on an external device, I suspect Apple have not built this feature into the hardware. The options for showing to a TV are not in the photo menus either.
    Ian

  • Does the IPod Nano sink with the nike fuel band

    Does the IPod Nano sink with the nike fule band? I am getting the IPod nano for christmass and I was wondering if that is compatable with the fuel band? I have seen my firend sink his with his IPhone and was wondering if I could do the same?

    http://www.apple.com/ipod/nike/

  • Does the ipod nano come with Apple Earphones with Remote and Mic

    does the ipod nano come with Apple Earphones with Remote and Mic

    Click on the Ipod gray tab at the top of this site.  There you will find all the information you need about the model iPod you wish to purchase. 

  • Does the iPod nano come with a means to charge the battery?

    Does the iPod nano come with a means to charge the battery?

    Yes it comes with a syncing cable that you can connect to your PC's USB ports to charge or you can connect it to an Apple wall adapater (sold seperately).
    B-rock

  • Does the Ipod nano work with microsoft XP?

    Does the ipod nano work with MS windows XP? itunes will recognize my Nano 7G, therefor I cannot sync,

    Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
    of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

Maybe you are looking for

  • Mac book pro - general issues i'm having

    I swear since i bought my macbook pro 9 months ago there has been nothing but trouble with it. The longer i have it the more that seems to go wrong. Now i have a few issues and were wondering if these were normal or not really. The first issue i have

  • Device manager reporst issue

    i recently purchased officejet pro 8610. I followed all instructions . My OS is Windows 7 32 bit (all updates cuurent). My device manager shows OTHER DEVICES, HP Officejet 8610, drivers not installed (code 28), i made several attempts to UPDATE DRIVE

  • Laser power levels

    everytime I try and burn a playlist in i-tunes i get the error message tht the laser power level could not be calibrated for this media. I have tried many different brands of cd-r disks, verbatim, maxell, tdk... one of the tdk worked on the first dis

  • Doubt on Modifications in the Menu painter

    Hi Experts, I am trying to add a sub-object to the EDIT button in the Menu Bar of the VA01 transaction. I am able to add the new function code to the SAPMV45A program's menu bar and register the f-codes using t code VFBS. But when i am trying to impl

  • Alt text and doctype XHTML

    Just a question to know if my thoughts are right... I have made my website and at the top DW has put: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.