Ipod Nano - radio no longer recognized

I have been using the radio connection with my ipod for months but just recently it stopped working. After making sure that I had the latest versions, I plugged in the radio, turned on the ipod and "Radio" appeared on the menu. Unfortunately, after a few seconds it disappears and I get this message: "The currently attached accessory is not supported by this Ipod." Not sure why; any ideas? Thanks.

The first things to try are these basic troubleshooting steps.
The Five Rs.

Similar Messages

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • IPod Nano 3G lo longer recognized after Update to iTunes 9 on Vista 32 Ulti

    So i updatedt to iTunes 9 yesterday - only to find out that my iPod 3G is no longer recognized by iTunes. Also my 2G are not recognized any longer on this machine
    ALL three iPods still work fine with my other computer whicgh is running the same Windows version but has still iTunes 8 installed.
    With the IPod service disabled the iPods appear properly as a device - they show their assigned name and you can browse the content.
    When the service is enabled and you start iTunes iTunes displays a message that says that it "discoveerd" the iPod but could not identify it
    see heer http://0711.diy-punk.net/WOW/ipodfu.jpg
    also as soon as iTunes gets involved the device is no longerreadable under Windows
    i tried multiple reboots, restart of iPod service, rebooted the iPod, resetted the iPod - nothing helps...
    This is the iTunes diagnois (in german, sorry)
    Microsoft Windows Vista Ultimate Edition Service Pack 1 (Build 6001)
    System manufacturer System Product Name
    iTunes 9.0.0.70
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes-Seriennummer 4408A0FF9EFAA0D3
    Aktueller Benutzer ist kein Administrator.
    Aktuelles Datum und Uhrzeit sind 2009-09-15 18:26:25.
    iTunes befindet sich nicht im abgesicherten Modus.
    Info zu Video-Anzeige
    NVIDIA, NVIDIA GeForce GTX 275
    ** Info für externe Plug-Ins **
    Plug-In-Name: AMIP (stub)
    Plug-In geladen: Ja
    Plug-In-Version: 0.8
    Plug-In-Dateiversion: 0.5.0.0
    Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\ituneswrapper.dll
    Plug-In-Name: Last.fm AudioScrobbler
    Plug-In geladen: Ja
    Plug-In-Version: 0.0.2
    Plug-In-Dateiversion: 3.0.2.0
    Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
    Genius-ID: f2f8282b830c835751cb597904744cb8
    ** Verbindungstests für iPod/iPhone **
    iPodService 9.0.0.70 arbeitet zurzeit.
    iTunesHelper 9.0.0.70 arbeitet zurzeit.
    Apple Mobile Device service 2.50.39.0 arbeitet zurzeit.
    Universal Serial Bus Controller:
    Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Gerät funktioniert wie vorgesehen.
    FireWire-Host-Controller (IEEE 1394):
    AGERE OHCI Compliant IEEE 1394 Host Controller. Gerät funktioniert wie vorgesehen.
    Zuletzt angeschlossenes, jetzt nicht verbundenes Gerät:
    iPod nano (3. Generation) mit Firmwareversion 1.1.3
    Seriennummer: YM741YNKYXT
    ** Sync-Tests für iPhone/iPod touch **
    Kein iPhone oder iPod gefunden

    Yeah... I hope apple solves this problem soon. =\
    I use Windows XP instead of Vista...
    This happened to me:
    I plugged my iPod
    Oppened the iTunes, iTunes recognized the iPod with all the songs, album covers, playlists, etc.
    It asked for update. (Download & Instal, ok)
    Finished the update, oppened the iTunes 9.0. Added a new songs but then I realized it didn't recognize the iPod (wich was plugged.)
    I checked on "My computer" and I saw "iPod". Ok.
    When I ejected the iPod it was clean. No musics, no Videos, no playlists. Started on the screen "Select your language".
    I Tried reinstaling the iTunes but whenever I got an older version it said something like "The iTunes can't be started because the iTunes library has been generated by a new version."
    Restarted my PC several times.
    Rebooted the iPod.
    Tried switching USBs.
    NOTHING works.
    Nothing at all.
    even tryed the manage thing on "My Computer".
    If they don't find a way of fixing this bug my iPod Nano is not better than a f**kin' Pendrive... ~.~"
    Hope apple do something...

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • My 4th generation ipod nano backlight no longer working. Any suggestions

    My 4th or 5th generation ipod nano backlight is no longer working.  Any suggestions?

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

    My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes.  When I plug my ipod into my imac, it does not even read or recognize my ipod.  What do i do?

    Are you using the original cable that came with Nano and not your iPhone's cable?  Have you worked through the troubleshooting in this Apple support document?
    http://support.apple.com/kb/TS1410
    B-rock

  • My ipod nano is not being recognized by my laptop

    dear apple community users,
    when i connect my ipod nano to my lapto (hp) it shows the charging sign but it is not recognized by the laptop.
    i have tried turning it on and off may times but has not helped
    i have the latest version of itunes on the laptop but due to this problem i am not able to sync the music files from the laptop
    plss help and reply asap

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • My ipod nano is not being recognized by any power source:(

    My computer and power cord for electrical outlet is not causing any response from my ipod

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • My ipod nano has stopped being recognized by my mac computer

    My ipod nano has stopped being recognized by my mac computer, it used to work and all of a sudden it isn't, please advise...

    Hi there,
    You may find the troubleshooting steps found in the article below helpful.
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    -Griff W.

  • Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

    Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

    I found that all the movies that I want on my nano have iTunes extras.

  • My iPod Nano 7th is not recognized by my ASUS 11.6 mini PC with Windows 8 and IE 10.  Any suggestions?  Thanks.  Lily

    My iPod Nano 7th is not recognized by Windows 8 in my ASUS 11.6 mini PC with IE 10.  Any suggestions? Thanks.  Brownalex

    Hey Brownalex,
    I'd follow the steps in this article if your iPod nano doesn't appear in iTunes and also doesn't appear as a disk drive in My Computer:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Hope that helps,
    David

  • HT4316 can you listen to the ipod nano radio on a portable speaker, ie, not head/earphones

    Does anyone know if its possible to listen to the ipod nano radio on a portable speaker, and not head/earphones.  I know that the head/earphones act as a antenna, but if plugged into a small portable speaker, does that also work as an antenna?

    Hi how did you solve this I have same problem

  • IPod Nano radio...wireless connection...not!

    Why in the world isn't the radio antenna internal on the iPod nano radio? Since the earbuds are the antenna, it is impossible to have the radio transmit to my wireless earphones. Come on Apple engineers I expect much more from you.

    You're speaking to deaf ears here.  These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. 
    All complaints and suggestions should be posted on the Product Feedback forum area. 

  • Hello i would to play my ipod nano radio via my Bluetooth speakers but it only plays via the head phones is there anyway around this . thanks

    Hello I was hoping to listen to my ipod nano radio stations via Bluetooth speakers but I can't get this to work it only plays via head phones Thank s for any help

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • I just downloaded the latest version of itunes to my windows 8 pc and now my ipod nano can no longer be recognized by the computer

    I just downloaded the latest version of iTunes and now my computer does not recognize my ipod nano.  How do I fix this?

    Hi jstutsman,
    If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
    iPod not appearing in iTunes - Apple Support
    Regards,
    - Brenden

Maybe you are looking for

  • Report:"encountered the symbol of namespace....."

    My Envirement: CentOS 4.7||Oracle11g||pro*c My file of nn.pc: [oracle@oracle11g work2]$ more nn.pc #include<iostream> using namespace std; #include "sqlca.h" EXEC SQL BEGIN DECLARE SECTION; char *uid="scott/scott@wilson"; EXEC SQL END DECLARE SECTION

  • Dump when executing DTP right after infopackage in BI 7.0 SP 7

    Hello. whenever I try to execute DTP <b>right after</b> run infopackage (eg.master loading), exception error occurs like below. <b><u>"A RAISE statement in the program "SAPLRSSTATMAN" raised the exception"</u></b> can't find any notes related to this

  • Re: Bridge doesn't open

    Hi, I have the same problem. I have a brand new iMac, 3.4 Ghz Intel Core 5, 16GB Mem, 3Tb disc and when I try to open Bridge I get the following popup: (The opeation could not be completed) When you click on Aceptar (Accept) the application closes it

  • Which image file type is best to use for iTunes artwork?

    I have quite a few songs in my library which do not have any official artwork available for them, so I have used other images and altered them in Photoshop by adjusting colours and creating transparent backgrounds. Re: transparent backgrounds, I save

  • Whenever I forward mails I get only the subject line as forward All attachments and text is blank

    I am currently using Windows 7 - 64 bit as my operating system. Previously this was not the case. But after I changed my operating system, problem started in forwarding my mails. Whenever I forward my mails, Only the subject line is filled. All the t