IPod nano randomly ejects itself while connected with iTunes open

While my iPod nano is connected and iTunes is open, it will randomly eject and diappear from the iTunes left column while songs are being updated. It then proceeds to have errors whenever I connect, saying some sort of file is corrupt.
I have restored the iPod, restarted the computer, and started from scratch. Whenever I try to upload my songs again, it automatically disconnects about half-way through. This seems to be a continuous problem for me.

See this...
iPod: What to do if Windows displays an "itunes.exe - Corrupt File" message
And if the problem persists...
Da Gopha: What to do if Windows displays an "iTunes.exe - Corrupt File" message
btabz

Similar Messages

  • My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when connected

    My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.

    Hey Biglou1,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • IPod Nano 6th gen won't sync with iTunes 12.1.1.4

    iPod Nano 6th gen won't sync with iTunes 12.1.1.4.
    This iPod was synced with another iTunes library. I had to transfer iTunes library from another laptop.
    Launch iTunes (12.1.1.4), plug in Nano, Nano display says connected, Nano appears in iTunes, but when I attempt to navigate to Nano nothing occurs, or if I am able to navigate to Nano then I can't go any further and select music to sync and the Nano comes out of connected state. I have had to close iTunes, sometimes reboot laptop, but nothing I do appears to make any difference. It won't allow me to continue music selection process and start the sync process. Is there a way to simply reset the Nano and reconnect to get it to sync? I don't care about content as it needs to be resynced with this iteration of iTunes because it is currently associated with the other iTunes library.
    Any suggestions would be appreciated.

    What solved my problem:
    I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
    Additional details:
    I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

  • Ipod Nano 4th Gen can't sync with ITunes.  I'm using Windows 8.1 w/Media Pack

    My IPod Nano 4th Gen will not syn with ITunes after I upgraded to Windows 8.1 with Media Pack.  I'm using Internet Explorer 11 and Comcast is my IP

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    - Restore from backup. See:                                 
      iOS: How to back up

  • My mini ipad is blocking while connecting with itunes.  I do?

    my mini ipad is blocking while connecting with itunes.
    I do?

    Hello Gamerpapanatas,
    Based on the information you have provided, it sounds like your iPad mini is not connecting to iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • HT1212 Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Old ipod, can not get it to connect with itunes & i no longer have the computer it was once synced to. It will not allow me to do anything but turn it off & on.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Why does my ipod classic keep ejecting when I connect it iTunes?

    My Ipod Classic keeps ejecting when I connect to my MAC, why?

    both my ipod touch 4th gen and my iPad Air is not detected., i have tried checking the USB cables,. and the Apple Mobile Device (Stop/Start Service from Computer MAnagement) in Windows 8.1 iTunes 11.1.5 is not detecting the devices,., i have check already for all updates,. nothing happens.,., but WIndows does detect the devices only itunes does not

  • My iPod nano's bluetooth won't connect with my Macbook Pro after pairing, why?

    Just purchased a new 7th generation iPod nano, synced it up to my iTunes account using the cable and charged it fully.
    All working fine, except for when I tried to then connect it via bluetooth.
    My Macbook Pro (which also has all the latest updates) was able to discover my iPod and when prompted to pair I did so and was presented with a code to verify on my iPod nano's screen. I clicked to confirm, and that is where the journey stopped.
    when I try to connect it tells me it has failed and asks if it is within range, when it was sat an inch away.
    I have tried reseting the iPod, forgetting the connection and pairing again several times, and tried to pair and connect whilst the cable was attached.
    I'm assuming it's the iPod that is at fault as my mouse is fine.
    I have run out of ideas.

    Just sync, I'm not sure what else it is suppose to be able to do as I am yet to achieve a connection.
    I am assuming it should be able to sync my library, playlists, etc.

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • IPod Nano, 1st gen., won't connect with XP

    I have a 1 GB black 1st generation iPod Nano. The screen recently broke, so I had to send it in for servicing and they sent me a new one. My old iPod Nano worked perfectly with iTunes and Windows XP. Now, when I try to connect my new one, I guess that since it has a different Serial Number, iTunes nor Windows will recognize it. I called the Apple company, hoping they could help me, but they couldn't and said it was a Microsoft problem. My iPod will charge and everything, it's just that when I try to use the iPod CD, my computer won't recognize the CD either. If you have any suggestions, please post them. I can't wait till I can use my iPod again!

    The iPod Nano only has A2DP (stereo bluetooth) AVRCP (controls) and low power Bluetooth profiles. It does not have File Transfer Protocol (FTP) and cannot connect to your phone.

  • IPod Nano 7th Gen won't connect with phone

    I am trying to connect my Droid Razor HD with my iPod Nano 7th Gen using Bluetooth. My phone recognizes the connection, my iPod doesn't. States:
    Mobile phone
    Not Connected
    What's going on?

    The iPod Nano only has A2DP (stereo bluetooth) AVRCP (controls) and low power Bluetooth profiles. It does not have File Transfer Protocol (FTP) and cannot connect to your phone.

  • IPod nano 6th gen won't synch with iTunes 12.1.1

    Since I upgraded to iTunes 12.1.1.4 on my Windows 7 PC a couple of weeks ago, I have been unable to synch my iPod nano 6th generation (SW version 1.2) with iTunes. I have followed Apple's instructions to uninstall all of my Apple SW, restart my PC, then install iTunes again, restart my PC, then attempt to synch. I get the same failure I had before re-installing iTunes. My iPod connects with the PC and displays an icon on iTunes. I can select the iPod icon on iTunes and select the menu items under "Settings" and "On My Device", and all of the music and podcasts stored on my iPod are displayed. But when I select "Synch", I get the following two error messages:
    1. The iPod "Larry's iPod" cannot be synced because it cannot be found.
    2. The iPod "Larry's iPod" cannot be synced. The disk is not available.
    I never had such problems with any prior version of iTunes during the several years I have owned my iPod. Help!
    Thank you.

    What solved my problem:
    I restored my iPod nano on my wife's PC, which had version 11 of iTunes. I was then able to sync it on my PC. Why didn't I restore it on my PC? See following details.
    Additional details:
    I first took the iPod to the local Apple Store, where the only course of action they could offer was to restore the iPod. So they did. When I got home, it wouldn't even connect to iTunes on my PC, which was a regression from the day before. Out of desperation I plugged it into my wife's PC, and her older version of iTunes immediately told me the iPod had been formatted on a Mac and it needed to be restored on a PC to be usable by a Windows machine. Why my newer version of iTunes couldn't tell me that is a mystery.

  • IPod nano (1st Gen) won't sync with iTunes 7

    I upgraded iTunes to latest version and now when I connect my Nano it does not sync the music. I have 382 tunes on my Nano and it loaded only 25 into the Library - this were all Music Store purchases strangely.
    Any ideas? I'm on XP by they way
    iPod Nano 1st generation   Windows XP  

    i say that even tho itunes 7 fixed holes in 6 its still totaly CRAP comapared to 5. and ya it half makes sense to put out a new itunes along with a new ipod gen. but still when the millions of ppl with the first gin have so many problems i dont see how apple isnt getting sued for exentialy sabotoging milions of peoples ipod. i mean when u pay at least $200 for something i would think it sould last more then8 months and not only am i having the itunes problems with sync but according to the guy that reinstalled windows on my laptop its itunes that made it crash and i found an article that thousands of other people had the same thing happen so if thats true thats around $500 ($200 for ipod and $300 for windows pro install cd) apple took from me

  • IPod Nano 6th generation won't sync with iTunes.

    I replaced the battery in my iPod Nano 6th generation and now it won't sync with iTunes. It shows in the list as iPod recognises that it is in recovery mode, so advises to restore. Press the restore button and after a time a message says can't find the iPod

    do you ever unplug your iPod without ejecting it first?

  • My new iPod Touch doesn't want to connect with iTunes.

    Before, I had an iPod Nano from the second generation, so it was one of the first iPods on the market. Now I got an iPod Touch for my birthday, but when I plug him in on iTunes it says that there's something wrong with the software. I need to deinstall iTunes and that I have to install the latest version (64 bits). The thing is that I have the latest version. And I've deinstalled and installed iTunes at least 10 times now. I still get the same error.
    Oh, and I have a laptop from Asus, so I work with Windows (64 bits).. Maybe that's important, I don't know.
    I can't wait to finally put some music on my new iPod Touch, please help..
    Thanks!

    Try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Then the other actions of:
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Can i connect to a 'belkin USB Hub' so i can print and save images direct from my ipad 2..

    I have just bought a 'Belkin USB Hub' so that i can have my printer and external hard drive in a home office rather than carting them around the house or having to sit in my back room when i want to print from my mac lap top, works fine , but my ques

  • IC WebClient (lead managment)

    Hello expertise I'm working on CRM 5.0 IC WebClient, I'm facing a problem in the Webclient that When I'm trying to create a lead I got an Error Message that the <b>Business transaction dose not supports lead</b>. Thanks <b>Khaled Fahim</b>

  • Migration of smartforms into adobe forms

    hi,        After migration of smart form into adobe form,  while checking( syntax )  the error message will be displayed like the Sender Country is not filled.  if i fill the sender country then only the adobe form activate but  no sender  country is

  • How to move XML tree to another level using DOM api ?

    <p> Hi, </p> <p> I have a followin function </p> <p> <font face="courier new,courier"><strong>    public void printEmployeesAsXML(){ </strong></font> </p> <p> <font face="courier new,courier"><strong>        ViewObject vo = getEmployees();         No

  • About 9i installation

    Hi guys: when I tried to install Oracle9iAS from the CD, encountered a problem. Under Windows2000 in the command window, typed <java -jar oc4j.jar -install> a message dialogue jumped out which indicated java.exe gerated error. Could you give me some